PKTC-ES-TAP-MIB Table View

This table lists the Mediation Devices with which the
intercepting device communicates. These may be on the same or
different Mediation Devices.
This table is written by the Mediation Device, and is always
volatile. This is because intercepts may disappear during a
restart of the intercepting equipment.
Entries are added to this table via pktcEScTapMediationStatus
in
accordance with the RowStatus convention.

pktcEScTapMediationEntry row .1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1

The entry describes a single session maintained with an
application on a Mediation Device.

Indexes

pktcEScTapMediationContentId

Column	Syntax	OID
pktcEScTapMediationContentId pktcEScTapMediationContentId is a session identifier, from the intercept application's perspective, and a content identifier from the Mediation Device's perspective. The Mediation Device is responsible for making sure t…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.1
pktcEScTapMediationDestAddressType The type of pktcEScTapMediationDestAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.2
pktcEScTapMediationDestAddress The IP Address of the Mediation Device's network interface to which to direct intercepted traffic.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.3
pktcEScTapMediationDestPort The port number on the Mediation Device's network interface to which to direct intercepted traffic.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.4
pktcEScTapMediationSrcInterface The interface on the intercepting device from which to transmit intercepted data. If zero, any interface may be used according to normal IP practice.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.5
pktcEScTapMediationDscp The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic.	PktcEScTapDscpr/w Type Constraints: range: 0..63 Description: An integer that is in the range of the DiffServ codepoint values.	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.7
pktcEScTapMediationTimeout The time at which this row and all related Stream Table rows should be automatically removed, and the intercept function cease. Since the initiating network manager may be the only device able to manage a specific inter…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.10
pktcEScTapMediationTransport The protocol used in transferring intercepted data to the Mediation Device. The following protocols may be supported: udp: PacketCable udp format	Enumerationr/w Enumerated Values: 1 udp	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.11
pktcEScTapMediationNotificationEnable This variable controls the generation of any notifications or informs by the MIB agent for this table entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.12
pktcEScTapMediationStatus The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table. pktcEScTapMediationTimeout may be modified at any time (even while the row is active). But when…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.2.9.1.1.1.1.2.1.13

The Intercept Stream Table lists the traffic streams to be
intercepted. The same data stream may be required by multiple
taps, and one might assume that often the intercepted stream
is a small subset of the traffic that could be intercepted.
The Table consists of generic fields that are independent
of the type of intercept. It contains type of the specific
filter which is defined in an extension MIB and counters to
account for packets intercepted or dropped by the attached
filter specification.
Note that the Mediation Device must make sure there is
only one type of specific filter created with the same
indices as that of a row in this table, otherwise the
later creations will fail. For example, if there is a
row in this table with index 1.2, there can be a
corresponding row with the same index either in
tapStreamTable, c8tapStreamTable or cuctTapStreamTable,
but not all.
The first index indicates which Mediation Device the
intercepted traffic will be diverted to. The second index
permits multiple classifiers to be used together.
Entries are added to this table via pktcEScTapStreamStatus in
accordance with the RowStatus convention.

pktcEScTapStreamEntry row .1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1

A stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface, and many
application interfaces are supported.

Indexes

pktcEScTapMediationContentId pktcEScTapStreamIndex

Column	Syntax	OID
pktcEScTapStreamIndex The index of the stream itself.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.1
pktcEScTapStreamType Identifies the type of intercept filter associated to this generic stream. The following type of streams is supported: ip: The specific filter is an IP filter with same indices as that of this table. The exact filter is…	Enumerationr/w Enumerated Values: 1 ip 2 mac 3 userConnection 4 msPdsn	.1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.2
pktcEScTapStreamInterceptEnable If 'true', the tap should intercept matching traffic. The value for this object should be set to 'true' only after an additional filter specification has been attached to this stream.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.3
pktcEScTapStreamInterceptedPackets The number of packets matching this data stream specification that have been intercepted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.4
pktcEScTapStreamInterceptDrops The number of packets matching this data stream specification that, having been intercepted, were dropped in the lawful intercept process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.5
pktcEScTapStreamStatus The status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. pktcEScTapStreamInterceptEnable may be modified even the value of this entry rowStatus object is 'active…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.2.9.1.1.1.2.1.1.6

A table that contains Lawful Intercept debug messages
generated by the implementing device. This table is used
by pktcESTapMediationDebug and pktcESTapStreamDebug
notifications.
An entry in this table contains a debug message which is
regarding either a Mediation Device or a intercept stream
created by a Mediation Device. The Mediation device is
identified by pktcEScTapDebugMediationId whose value is
that of pktcEScTapMediationContentId of
pktcEScTapMediationEntry.
The stream is identified by pktcEScTapDebugMediationId and
pktcEScTapDebugStreamId whose values are that of
pktcEScTapMediationContentId and pktcEScTapStreamIndex of
the corresponding pktcEScTapStreamEntry.
Note that pktcEScTapDebugStreamId may be zero for an entry,
in which case the debug message is regarding a Mediation
Device.
Entries are added to this table via pktcEScTapDebugStatus in
accordance with the RowStatus convention.

pktcEScTapDebugEntry row .1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1

A list of the debug messages.

Indexes

pktcEScTapDebugIndex

Column	Syntax	OID
pktcEScTapDebugIndex Index to the debug table.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1.1
pktcEScTapDebugMediationId The value of this object is pktcEScTapMediationContentId identifying an entry in pktcEScTapMediationTable. Note this object may contain a value for which an entry in pktcEScTapMediationTable does not exist. This happens…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1.2
pktcEScTapDebugStreamId The value of this object is that of pktcEScTapStreamIndex of an entry in pktcEScTapStreamTable. This object along with pktcEScTapDebugMediationId identifies an entry in pktcEScTapStreamTable. The value of this object ma…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1.3
pktcEScTapDebugMessage A text string contains the debug message.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1.4
pktcEScTapDebugStatus The status of this conceptual row. A row in this table is created by the implementing device. A management station cannot modify any of the objects in this row, except deleting the row by setting this object to 'destroy…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.2.9.1.1.1.3.3.1.5