PKT-STORM-CTRL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
12
.1.3.6.1.4.1.171.12.25.3.1 · 1 row entry · 12 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swPktStormCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PKT-STORM-CTRL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PKT-STORM-CTRL-MIB::swPktStormCtrlTable'
A table that contains information about packet storm control.
A S/W mechanism is provided to monitor the traffic rate in addition
 to the H/W storm control mechanism. If the traffic rate is too high,
 this port will be shut down.
swPktStormCtrlEntry row .1.3.6.1.4.1.171.12.25.3.1.1
A list of information for each port of the device.
Column Syntax OID
This object indicates the device's port number.(1..Max port
number in the device).It is used to specify a range of ports to be
configured.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.171.12.25.3.1.1.1
This object is the upper threshold at which the specified storm control will turn on.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the maximuim number, it is determined by…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.12.25.3.1.1.2
This object indicates whether the broadcast storm control is enabled or disabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
.1.3.6.1.4.1.171.12.25.3.1.1.3
This object indicates whether the multicast storm control is enabled or disabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
.1.3.6.1.4.1.171.12.25.3.1.1.4
This object indicates whether the unicast(Destination Loopback Fail) storm control is enabled
or disabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
.1.3.6.1.4.1.171.12.25.3.1.1.5
There are two actions to take for storm control, shutdown and drop. The
former is implemented in S/W, and the latter is implemented in H/W. If a user
chooses shutdown, they will need to configure both the back_off and t…
Enumerationr/w
Enumerated Values:
1shutdown
2drop
.1.3.6.1.4.1.171.12.25.3.1.1.6
If a packet storm has been encountered continuously on a given port for a long
period of time (indicated by the value of this object), the port will be shut
down forever until it's recovered manually.
Note:
The max entr…
minutesSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.12.25.3.1.1.7
This object is the sampling interval of received packet counts.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the max number, it is determined by the project itself.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.12.25.3.1.1.8
This object indicates whether the storm control is shut down forever or not.
This command recover it manually. If support auto-recover mechanism, the object is no use.
Enumeration
Enumerated Values:
1yes
2no
.1.3.6.1.4.1.171.12.25.3.1.1.9
The upper threshold at which the specified storm control will turn on.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the maximuim number, it is determined by the project it…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.12.25.3.1.1.10
This object indicates the upper threshold at which the specified storm control will turn on.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the maximuim number, it is determ…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.12.25.3.1.1.11
This object indicates the upper threshold at which the specified storm control will turn on.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the maximuim number, it is determ…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.12.25.3.1.1.12