PDN-TRAPMGR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
10

devTrapMgrTable

table mandatory
.1.3.6.1.4.1.1795.2.24.2.9.3 · 1 row entry · 4 columns
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk devTrapMgrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-TRAPMGR-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-TRAPMGR-MIB::devTrapMgrTable'
The trap manager table.
devTrapMgrEntry row .1.3.6.1.4.1.1795.2.24.2.9.3.1
An entry in the trap manager table.
Column Syntax OID
Unique IP address identifying a Trap Manager. An

existing Trap Manager may be deleted by setting

the devTrapMgrIpAddress object to 0.0.0.0 or by

setting the devTrapMgrIpAddre…
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.1795.2.24.2.9.3.1.1
The ifIndex to be used with the associated IpAddress

when sending traps.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1795.2.24.2.9.3.1.2
The circuit used for management when multiple circuits

are allowed over the specified interface (ifIndex). If

the interface allows only one circuit, devTrapMgrCircuit

is set …
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1795.2.24.2.9.3.1.3
The subcircuit used for management when devTrapMgrCircuit

can be further subdivided.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1795.2.24.2.9.3.1.4

pdnDevTrapMgrTable

table mandatory
.1.3.6.1.4.1.1795.2.24.2.9.4 · 1 row entry · 6 columns
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnDevTrapMgrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-TRAPMGR-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-TRAPMGR-MIB::pdnDevTrapMgrTable'
The paradyne's device trap manager table.
pdnDevTrapMgrEntry row .1.3.6.1.4.1.1795.2.24.2.9.4.1
An entry of a trap manager configuration.
Column Syntax OID
The IP Address of the destination to which a trap

must be sent.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.1795.2.24.2.9.4.1.1
This object is used to specify the subnet mask
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.1795.2.24.2.9.4.1.2
The Port destination used to send the trap.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1795.2.24.2.9.4.1.3
This object corresponds to the name of the SNMP Community

that will be used when sending the trap out to this

manager destination.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.1795.2.24.2.9.4.1.4
This object corresponds to turning traps

on/off for a particular destination.

enable (1) - traps will be sent to the

specified destination.

disable (2)- tra…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.1795.2.24.2.9.4.1.5
This object is used to add/delete rows

to/from the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.1795.2.24.2.9.4.1.6