PDN-REACHDSL-MIB
The Paradyne enterprise ReachDSL MIB.
This MIB is written specifically to facilitate
in the management of ReachDSL devices as well as
help in configuration of Spectrum Management
specific objects for ReachDSL products.
- Source file
PDN-REACHDSL-MIB- Last revised
- Identity
pdnReachDSL- Base OID
1.3.6.1.4.1.1795.2.24.2.6.20
Imported Objects
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | pdn-interfaces |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DisplayString |
Net-SNMP examples using the paradyne MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PDN-REACHDSL-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PDN-REACHDSL-MIB::pdnReachDSL'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-REACHDSL-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-REACHDSL-MIB::pdnReachDSL'
Objects (31)
Showing 31 of 31 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.1795.2.24.2.6.20 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.1 |
|
|
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.2 |
.1.3.6.1.4.1.1795.2.24.2.6.20.1.3 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.2 |
|
|
tenth dBInteger32
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.3 |
|
|
tenth dBInteger32
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.4 |
|
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.5 |
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.2 |
||
|
tenth dBInteger32
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.3 |
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.5 |
||
|
tenth dBInteger32
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.6 |
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.7 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.8 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1.5 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.1.5.1 |
||
|
voltsInteger32
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.5.1.1 |
|
|
|
OctetString
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.5.1.2 |
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.6 |
|
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.7 |
|
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.6.20.1.8 |
|
.1.3.6.1.4.1.1795.2.24.2.6.20.2 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.2.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.20.2.2 |
Dependencies (8) 5 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- RFC1155-SMIrfc
- PDN-HEADER-MIBparadyne
- PDN-REACHDSL-MIBparadyneselected
Conformance Groups (8)
|
pdnReachDSLConfigurationGroup
deprecated
|
reachDSLSpectrumMgmtSelection reachDSLSpectrumMgmtConfEWL reachDSLSpectrumMgmtConfLoopLength reachDSLSpectrumMgmtConfAtucMaxTxPower reachDSLSpectrumMgmtConfAturMaxTxPower reachDSLPotsDetectionVoltage reachDSLCircuitIdentifier
A collection of configuration objects required
for providing access to configuration as well as status information for reachDSL products. |
.1.3.6.1.4.1.1795.2.24.2.6.20.2.1.1
|
|
pdnReachDSLInformationGroup
deprecated
|
reachDSLSpectrumMgmtAtucMaxTxRate reachDSLSpectrumMgmtAtucMinTxRate reachDSLSpectrumMgmtAtucMaxTxPower reachDSLSpectrumMgmtAturMaxTxRate reachDSLSpectrumMgmtAturMinTxRate reachDSLSpectrumMgmtAturMaxTxPower reachDSLSpectrumMgmtMinEWL reachDSLSpectrumMgmtMaxEWL reachDSLSpectrumMgmtLoopMeasurementMethod reachDSLSpectrumMgmtEWLUnits reachDSLSpectrumMgmtMode
A collection of objects providing access meant
specifically for accessing information for for reachDSL products. |
.1.3.6.1.4.1.1795.2.24.2.6.20.2.1.2
|
|
pdnReachDSLDeprecatedGroup
deprecated
|
A collection of objects that have been deprecated.
|
.1.3.6.1.4.1.1795.2.24.2.6.20.2.1.3
|
|
reachDSLSpectrumMgmtSelection reachDSLSpectrumMgmtConfAtucMaxTxPower reachDSLSpectrumMgmtConfAturMaxTxPower reachDSLPotsDetectionVoltage
A collection of configuration objects required for
providing access to configure all reachDSL interfaces. |
.1.3.6.1.4.1.1795.2.24.2.6.20.2.1.4
|
|
|
reachDSLSpectrumMgmtAtucMaxTxRate reachDSLSpectrumMgmtAtucMinTxRate reachDSLSpectrumMgmtAtucMaxTxPower reachDSLSpectrumMgmtAturMaxTxRate reachDSLSpectrumMgmtAturMinTxRate reachDSLSpectrumMgmtAturMaxTxPower reachDSLSpectrumMgmtLoopMeasurementMethod reachDSLSpectrumMgmtEWLUnits reachDSLSpectrumMgmtMode
A collection of objects providing information applicable
to all reachDSL interfaces. |
.1.3.6.1.4.1.1795.2.24.2.6.20.2.1.5
|
|
|
A collection of objects providing configuration
access and information specific to reachDSL interfaces whose loop/line length measurement method is EWL. i.e.the reachDSLSpectrumMgmtLoopMeasurementMethod object is 'ewl'. |
.1.3.6.1.4.1.1795.2.24.2.6.20.2.1.6
|
|
|
A collection of object(s) providing configuration
access and information specific to reachDSL interfaces whose loop/line length measurement method is Loop Length (short/medium/long). i.e.the reachDSLSpectrumMgmtLoopMeasurementMethod object is 'loopLength'. |
.1.3.6.1.4.1.1795.2.24.2.6.20.2.1.7
|
|
|
A collection of object(s) providing configuration
access and information specific to reachDSL interfaces whose loop/line length measurement method is based on the Quad configuration. i.e.the reachDSLSpectrumMgmtLoopMeasurementMethod object is 'quadMode'. |
.1.3.6.1.4.1.1795.2.24.2.6.20.2.1.8
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.1795.2.24.2.6.20.2.2.1The compliance statement for SNMP entities which manage
ReachDSL interfaces.
ReachDSL interfaces.
Required groups
| mandatory | pdnReachDSLConfigurationGroup | |
| mandatory | pdnReachDSLInformationGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| reachDSLSpectrumMgmtSelection | readonly | Write access is not required. | |
| reachDSLSpectrumMgmtConfEWL | readonly | Write access is not required. | |
| reachDSLSpectrumMgmtConfLoopLength | readonly | Write access is not required. | |
| reachDSLSpectrumMgmtConfAtucMaxTxPower | readonly | Write access is not required. | |
| reachDSLSpectrumMgmtConfAturMaxTxPower | readonly | Write access is not required. | |
| reachDSLPotsDetectionVoltage | readonly | Write access is not required. | |
| reachDSLCircuitIdentifier | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.1795.2.24.2.6.20.2.2.2The compliance statement for SNMP entities which manage
ReachDSL interfaces.
ReachDSL interfaces.
Required groups
| mandatory | pdnReachDSLGeneralConfigGroup | |
| mandatory | pdnReachDSLGeneralInformationGroup | |
| optional | pdnReachDSLEWLModeGroup |
This group is mandatory for reachDSL interfaces whose loop/line length measurement method is EWL. i.e.the reachDSLSpectrumMgmtLoopMeasurementMethod object is 'ewl'. |
| optional | pdnReachDSLLoopLengthModeGroup |
This group is mandatory for reachDSL interfaces whose loop/line length measurement method is LoopLength (short /medium/long). i.e.the reachDSLSpectrumMgmtLoopMeasurementMethod object is 'loopLength'. |
| optional | pdnReachDSLQuadModeGroup |
This group is mandatory for reachDSL interfaces whose loop/line length measurement method is based on Quads. i.e.the reachDSLSpectrumMgmtLoopMeasurementMethod object is 'quadMode'. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| reachDSLSpectrumMgmtSelection | readonly | Write access is not required. | |
| reachDSLSpectrumMgmtConfAtucMaxTxPower | readonly | Write access is not required. | |
| reachDSLSpectrumMgmtConfAturMaxTxPower | readonly | Write access is not required. | |
| reachDSLPotsDetectionVoltage | readonly | Write access is not required. |