PDN-MGMT-IP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
16

pdnMgmtIpPortTable

table
.1.3.6.1.4.1.1795.2.24.2.6.21.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnMgmtIpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-MGMT-IP-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-MGMT-IP-MIB::pdnMgmtIpPortTable' 
This table contains one row per IP port in the system.
pdnMgmtIpPortEntry row .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1
Configuration information about a particular IP port
in the system.
Indexes
Column Syntax OID
pdnMgmtIpPortIndex
The index for this entry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.1
pdnMgmtIpAddress
The IP address assigned to this port.

If the pdnMgmtIpConfigMode is set to modes other than
'manual', then the MAX-ACCESS for this object is
read-only and the value of the object represents the
actual IP …
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.2
pdnMgmtIpNetMask
The IP subnet mask assigned to this port.

If the pdnMgmtIpConfigMode is set to modes other than
'manual', then the MAX-ACCESS for this object is
read-only and the value of the object represents the
actual…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.3
pdnMgmtIpEthGateway
The IP Gateway for an ethernet based IP port.

This object is supported only on IP ports that are
configured to run over ethernet type of media.
This object would be set to 0.0.0.0 for other types of
inter…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.4
pdnMgmtIpPhysAddress
The physical address associated with the media.

For IP Ports with Ethernet type of media, the
MAX-ACCESS for this object is restricted to read-only.
In such cases, this object would reflect the MAC addres…
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.5
pdnMgmtIpConfigMode
The IP configuration mode for the port.

In 'manual' mode, it is upto the user to provide
the IP address &amp; IP subnet mask of the port.

In 'dhcp' or 'bootp' modes, the respective
protocol…
Enumerationr/w
Enumerated Values:
1manual
2dhcp
3bootp
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.6
pdnMgmtBootIfIndex
The interface index of the ATM interface to be used
by BOOTP or DHCP client, if the pdnMgmtIpConfigMode
is set to 'bootp' or 'dhcp' respectively.

Even if the IP port (interface) is configured for
'manual'…
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.7
pdnMgmtBootVpi
The VPI of the ATM PVC to be used by BOOTP or DHCP
client, if the pdnMgmtIpConfigMode is set to 'bootp'
or 'dhcp' respectively.

Even if the IP port (interface) is configured for
'manual' configuration, th…
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.8
pdnMgmtBootVci
The VCI of the ATM PVC to be used by BOOTP or DHCP
client, if the pdnMgmtIpConfigMode is set to 'bootp' or
'dhcp' respectively.

Even if the IP port (interface) is configured for
'manual' configuration, th…
ATM-TC-MIBAtmVcIdentifierr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.9
pdnMgmtIpAdminStatus
The status of the IP Port (interface).

Data flow through the IP Port is possible only if this
object is set to 'up'.

When this object is set to 'down', the interface SHALL
be torn down and …
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.10

pdnMgmtAtmInvArpTable

table
.1.3.6.1.4.1.1795.2.24.2.6.21.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnMgmtAtmInvArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-MGMT-IP-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-MGMT-IP-MIB::pdnMgmtAtmInvArpTable' 
This table contains one row per Inverse ATM ARP entry
in the system. This table maps the &lt;ifIndex, vpi, vci&gt;
index to corresponding &lt;ipPortIndex, remoteIp&gt;.
pdnMgmtAtmInvArpEntry row .1.3.6.1.4.1.1795.2.24.2.6.21.1.2.1
ATM Inverse ARP entry corresponding to a particular
ATM PVC that is being used by management IP traffic.
Indexes
Column Syntax OID
pdnMgmtAtmIfIndex
The interface index associated with the ATM PVC.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.2.1.1
pdnMgmtAtmVpi
The VPI associated with the ATM PVC.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.2.1.2
pdnMgmtAtmVci
The VCI associated with the ATM PVC.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.2.1.3
pdnMgmtIpPortIfIndex
The Interface Index of the IP port to which
this inverse ARP entry is associated with.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.2.1.4
pdnMgmtNextHopIp
The IP address of the unit at the other end of
this ATM PVC. This represents the IP Gateway
equivalent for IP traffic on this specific ATM PVC.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.2.1.5
pdnMgmtAtmInvArpRowStatus
This object is used to create/delete the ATM inverse
ARP entry in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1795.2.24.2.6.21.1.2.1.6