PDN-LINK-FAULT-MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
7

pdnLinkFailureConfigTable

table
.1.3.6.1.4.1.1795.2.24.2.40.1.1.3 · 1 row entry · 7 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnLinkFailureConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-LINK-FAULT-MGMT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-LINK-FAULT-MGMT-MIB::pdnLinkFailureConfigTable' 
This table contains one row per link
being monitored for link failures.
pdnLinkFailureConfigEntry row .1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1
Configuration information about a particular
interface being monitored for link failured.
Indexes
Column Syntax OID
pdnLinkFailureLOSPeriodBeforeSwitching
This object allows users to configure the amount of
time a LOS condition shall exist on this uplink before
initiating a switchover.

Switchover due to LOS condition on this uplink will
not be valid if any…
secondsInteger32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.1
pdnLinkFailureLOFPeriodBeforeSwitching
This object allows users to configure the amount of
time a LOF condition shall exist on this uplink before
initiating a switchover.

Switchover due to LOF condition on this uplink will
not be valid if any…
secondsInteger32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.2
pdnLinkFailureAISLPeriodBeforeSwitching
This object allows users to configure the amount of
time a AIS-L condition shall exist on this uplink before
initiating a switchover.

Switchover due to AIS-L condition on this uplink will
not be valid if…
secondsInteger32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.3
pdnLinkFailureSdPeriodBeforeSwitching
This object allows users to configure the amount of
time a Signal Degraded (Sd) condition shall exist on
this uplink before initiating a switchover.

Switchover due to Sd condition on this uplink will
no…
secondsInteger32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.4
pdnLinkFailureSfPeriodBeforeSwitching
This object allows users to configure the amount of
time a Signal Failure Bit (Sf) condition shall exist on
this uplink before initiating a switchover.

Switchover due to Sf condition on this uplink will…
secondsInteger32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.5
pdnLinkFailureSdBerThreshold
This object allows users to configure the threshold
for the Signal Degrade Bit Error Rate (Sd).

The negated value of this number is used as the exponent
of 10 for computing the threshold value for the B…
Integer32r/w
Constraints:
range: 5-9
 .1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.6
pdnLinkFailureSfBerThreshold
This object allows users to configure the threshold
for the Signal Failure Bit Error Rate (Sf).

The negated value of this number is used as the exponent
of 10 for computing the threshold value for the B…
Integer32r/w
Constraints:
range: 3-5
 .1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.7