PDN-IF-EXT-CONFIG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
3

pdnIfXLinkConfigTable

table
.1.3.6.1.4.1.1795.2.24.2.6.12.1.3 · 1 row entry · 1 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnIfXLinkConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-IF-EXT-CONFIG-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-IF-EXT-CONFIG-MIB::pdnIfXLinkConfigTable' 
This table contains configuration information
for interfaces that are capable of switch roles
at run-time.
pdnIfXLinkConfigEntry row .1.3.6.1.4.1.1795.2.24.2.6.12.1.3.1
An entry in this table represents an interface
that is capable of being used as an uplink.

Typically, this table will contain entries only
for interfaces that are capable of switching roles.
Indexes
Column Syntax OID
pdnIfXLinkConfigRole
This object allows users to configure the role
(e.g., uplink) intended for this interface.
PdnLinkRoler/w
Type Values:
1uplink
2other
 .1.3.6.1.4.1.1795.2.24.2.6.12.1.3.1.1

pdnIfMultiprotocolEncapConfigTable

table
.1.3.6.1.4.1.1795.2.24.2.6.12.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnIfMultiprotocolEncapConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-IF-EXT-CONFIG-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-IF-EXT-CONFIG-MIB::pdnIfMultiprotocolEncapConfigTable' 
This table that contains additional  
interface configuration information.
pdnIfMultiprotocolEncapConfigEntry row .1.3.6.1.4.1.1795.2.24.2.6.12.3.1.1
There will be one of these rows for each interface that
supports RFC1483.
Indexes
Column Syntax OID
pdnIfMultiprotocolEncapConfigIPRoutedPDUs
In the upstream direction user can configure the IP
routed PDUs in the LLC SNAP encapsulation or VC Based
Multiplexing encapsulation (RFC1483). If neither is
configured 'none' is used. The direction is determined
by t…
Enumerationr/w
Enumerated Values:
1none
2llcSnap
3vcBasedMultiplexing
 .1.3.6.1.4.1.1795.2.24.2.6.12.3.1.1.1
pdnIfMultiprotocolEncapConfigBridgedPDUs
In the transmit direction user can configure the IP
routed PDUs in the LLC SNAP encapsulation or VC Based
Multiplexing encapsulation (RFC1483). If neither is
configured 'none' is used.
Enumerationr/w
Enumerated Values:
1none
2llcSnap
3vcBasedMultiplexing
 .1.3.6.1.4.1.1795.2.24.2.6.12.3.1.1.2