PDN-HDSL2-SHDSL-LINE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
41

pdnHdsl2ShdslSpanStatusExtTable

table
.1.3.6.1.4.1.1795.2.24.2.6.23.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnHdsl2ShdslSpanStatusExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-HDSL2-SHDSL-LINE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-HDSL2-SHDSL-LINE-MIB::pdnHdsl2ShdslSpanStatusExtTable' 
This table extends the hdsl2ShdslSpanStatusTable defined in the
HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which provides overall
information of DSL spans.
pdnHdsl2ShdslSpanStatusExtEntry row .1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1
An entry extends the hdsl2ShdslSpanStatusEntry defined in
[RFC 3276]. Each entry corresponds to a DSL line.
Indexes
Column Syntax OID
pdnHdsl2ShdslStatusMaxAttainableLineRate
Contains the maximum attainable line rate, in bps, in this
DSL span.
bpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.1
pdnHdsl2ShdslStatusActualLineRate
Contains the actual line rate, in bps, in this DSL span.
This is based upon measurements made during line probing.
bpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.2

pdnHdsl2ShdslEndpointConfTable

table
.1.3.6.1.4.1.1795.2.24.2.6.23.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnHdsl2ShdslEndpointConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-HDSL2-SHDSL-LINE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-HDSL2-SHDSL-LINE-MIB::pdnHdsl2ShdslEndpointConfTable' 
This table supports configuration parameters for segment
endpoints in a HDSL2/SHDSL line.  As this table is indexed
by ifIndex, it MUST be maintained in a persistent manner.
pdnHdsl2ShdslEndpointConfEntry row .1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1
Each entry represents a single segment endpoint in a HDSL2/SHDSL
line. It is indexed by the ifIndex of the HDSL2/SHDSL line, the
UnitId of the associated unit, the side of the unit, and the
wire-pair of the associated …
Indexes
Column Syntax OID
pdnHdsl2ShdslEndpointWirePair
The wire-pair of the modem associated with this segment
endpoint as per the PdnHdsl2ShdslWirePair textual convention.
PdnHdsl2ShdslWirePair
Type Values:
1wirePair1
2wirePair2
3wirePair3
4wirePair4
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.1
pdnHdsl2ShdslEndpointAlarmConfProfile
This object configures the alarm threshold values to be used
for this segment endpoint. The values are obtained from the
alarm configuration profile referenced by this object. The
value of this object is the index of …
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.2

pdnHdsl2ShdslEndpointCurrTable

table
.1.3.6.1.4.1.1795.2.24.2.6.23.1.3 · 1 row entry · 20 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnHdsl2ShdslEndpointCurrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-HDSL2-SHDSL-LINE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-HDSL2-SHDSL-LINE-MIB::pdnHdsl2ShdslEndpointCurrTable' 
This table contains current status and performance information
for segment endpoints in HDSL2/SHDSL Lines.  As with other
tables in this MIB indexed by ifIndex, entries in this table
MUST be maintained in a persistent manner.
pdnHdsl2ShdslEndpointCurrEntry row .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1
Each entry contains status and performance information relating
to a single segment endpoint. It is indexed by the ifIndex of
the HDSL2/SHDSL line, the UnitId of the associated unit, the
side of the unit, and the wi…
Indexes
Column Syntax OID
pdnHdsl2ShdslEndpointCurrAtn
The current loop attenuation for this endpoint as reported in
a Network or Customer Side Performance Status message.
dBInteger32
Constraints:
range: -127-128
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.1
pdnHdsl2ShdslEndpointCurrSnrMgn
The current SNR margin for this endpoint as reported in a
Status Response/SNR message.
dBInteger32
Constraints:
range: -127-128
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.2
pdnHdsl2ShdslEndpointCurrStatus
Contains the current state of the endpoint. This is a
bitmap of possible conditions. The various bit positions
are:

noDefect There no defects on the line.

powerBackof…
Bits
Enumerated Values:
0noDefect
1powerBackoff
2deviceFault
3dcContinuityFault
4snrMarginAlarm
5loopAttenuationAlarm
6loswFailureAlarm
7configInitFailure
8protocolInitFailure
9noNeighborPresent
10loopbackActive
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.3
pdnHdsl2ShdslEndpointES
Count of Errored Seconds (ES) on this endpoint since the xU
was last restarted.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.4
pdnHdsl2ShdslEndpointSES
Count of Severely Errored Seconds (SES) on this endpoint
since the xU was last restarted.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.5
pdnHdsl2ShdslEndpointCRCanomalies
Count of CRC anomalies on this endpoint since the xU was
last restarted.
detected CRC AnomaliesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.6
pdnHdsl2ShdslEndpointLOSWS
Count of Loss of Sync Word (LOSW) Seconds on this endpoint
since the xU was last restarted.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.7
pdnHdsl2ShdslEndpointUAS
Count of Unavailable Seconds (UAS) on this endpoint since
the xU was last restarted.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.8
pdnHdsl2ShdslEndpointCurr15MinTimeElapsed
Total elapsed seconds in the current 15-minute interval.
secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfTimeElapsed
Type Constraints:
range: 0..86399
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.9
pdnHdsl2ShdslEndpointCurr15MinES
Count of Errored Seconds (ES) in the current 15-minute
interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.10
pdnHdsl2ShdslEndpointCurr15MinSES
Count of Severely Errored Seconds (SES) in the current
15-minute interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.11
pdnHdsl2ShdslEndpointCurr15MinCRCanomalies
Count of CRC anomalies in the current 15-minute interval.
detected CRC AnomaliesPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.12
pdnHdsl2ShdslEndpointCurr15MinLOSWS
Count of Loss of Sync Word (LOSW) Seconds in the current
15-minute interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.13
pdnHdsl2ShdslEndpointCurr15MinUAS
Count of Unavailable Seconds (UAS) in the current 15-minute
interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.14
pdnHdsl2ShdslEndpointCurr1DayTimeElapsed
Number of seconds that have elapsed since the beginning of
the current 1-day interval.
secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfTimeElapsed
Type Constraints:
range: 0..86399
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.15
pdnHdsl2ShdslEndpointCurr1DayES
Count of Errored Seconds (ES) during the current day as
measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.16
pdnHdsl2ShdslEndpointCurr1DaySES
Count of Severely Errored Seconds (SES) during the current
day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.17
pdnHdsl2ShdslEndpointCurr1DayCRCanomalies
Count of CRC anomalies during the current day as measured
by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
detected CRC AnomaliesHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.18
pdnHdsl2ShdslEndpointCurr1DayLOSWS
Count of Loss of Sync Word (LOSW) Seconds during the current
day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.19
pdnHdsl2ShdslEndpointCurr1DayUAS
Count of Unavailable Seconds (UAS) during the current day as
measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.
secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.20

pdnHdsl2Shdsl15MinIntervalTable

table
.1.3.6.1.4.1.1795.2.24.2.6.23.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnHdsl2Shdsl15MinIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-HDSL2-SHDSL-LINE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-HDSL2-SHDSL-LINE-MIB::pdnHdsl2Shdsl15MinIntervalTable' 
This table provides one row for each HDSL2/SHDSL endpoint
performance data collection interval.  This table contains
live data from equipment.  As such, it is NOT persistent.
pdnHdsl2Shdsl15MinIntervalEntry row .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1
An entry in the pdnHdsl2Shdsl15MinIntervalTable.
Indexes
Column Syntax OID
pdnHdsl2Shdsl15MinIntervalNumber
Performance Data Interval number. 1 is the the most recent
previous interval; interval 96 is 24 hours ago. Intervals
2..96 are optional.
Unsigned32
Constraints:
range: 1-96
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.1
pdnHdsl2Shdsl15MinIntervalES
Count of Errored Seconds (ES) during the interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.2
pdnHdsl2Shdsl15MinIntervalSES
Count of Severely Errored Seconds (SES) during the interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.3
pdnHdsl2Shdsl15MinIntervalCRCanomalies
Count of CRC anomalies during the interval.
detected CRC AnomaliesPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.4
pdnHdsl2Shdsl15MinIntervalLOSWS
Count of Loss of Sync Word (LOSW) Seconds during the
interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.5
pdnHdsl2Shdsl15MinIntervalUAS
Count of Unavailable Seconds (UAS) during the interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.6

pdnHdsl2Shdsl1DayIntervalTable

table
.1.3.6.1.4.1.1795.2.24.2.6.23.1.5 · 1 row entry · 7 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnHdsl2Shdsl1DayIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-HDSL2-SHDSL-LINE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-HDSL2-SHDSL-LINE-MIB::pdnHdsl2Shdsl1DayIntervalTable' 
This table provides one row for each HDSL2/SHDSL endpoint
performance data collection interval.  This table contains
live data from equipment.  As such, it is NOT persistent.
pdnHdsl2Shdsl1DayIntervalEntry row .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1
An entry in the pdnHdsl2Shdsl1DayIntervalTable.
Indexes
Column Syntax OID
pdnHdsl2Shdsl1DayIntervalNumber
History Data Interval number. Interval 1 is the the most
recent previous day; interval 30 is 30 days ago. Intervals
2..30 are optional.
Unsigned32
Constraints:
range: 1-30
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.1
pdnHdsl2Shdsl1DayIntervalMoniSecs
The amount of time in the 1-day interval over which the
performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring dat…
secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfTimeElapsed
Type Constraints:
range: 0..86399
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.2
pdnHdsl2Shdsl1DayIntervalES
Count of Errored Seconds (ES) during the 1-day interval as
measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
secondsHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.3
pdnHdsl2Shdsl1DayIntervalSES
Count of Severely Errored Seconds (SES) during the 1-day
interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
secondsHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.4
pdnHdsl2Shdsl1DayIntervalCRCanomalies
Count of CRC anomalies during the 1-day interval as
measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
detected CRC AnomaliesHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.5
pdnHdsl2Shdsl1DayIntervalLOSWS
Count of Loss of Sync Word (LOSW) Seconds during the 1-day
interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
secondsHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.6
pdnHdsl2Shdsl1DayIntervalUAS
Count of Unavailable Seconds (UAS) during the 1-day interval
as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.
secondsHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.7

pdnHdsl2ShdslSpanConfProfileExtTable

table
.1.3.6.1.4.1.1795.2.24.2.6.23.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnHdsl2ShdslSpanConfProfileExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-HDSL2-SHDSL-LINE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-HDSL2-SHDSL-LINE-MIB::pdnHdsl2ShdslSpanConfProfileExtTable' 
This table extends the hdsl2ShdslSpanConfProfileTable defined in 
the HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which supports
definitions of span configuration profiles for DSL lines.
          
IMPORTANT NOTE:  This table is a 'pseudo-augments' of the
hdsl2ShdslSpanConfProfileTable. Refer to the April 21, 2004
revision description for a discussion on why the table is
indexed as opposed to augments. This table shares the same 
table table index as the hdsl2ShdslSpanConfProfileTable.
However, this table does not have a row status object. Therefore,
rows are created or deleted in this table by creating or 
deleting rows in the hdsl2ShdslSpanConfProfileTable.
pdnHdsl2ShdslSpanConfProfileExtEntry row .1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1
An entry extends the hdsl2ShdslSpanConfProfileEntry defined in
[RFC 3276]. Each entry corresponds to a profile for a span.
Indexes
Column Syntax OID
pdnHdsl2ShdslSpanConfWireInterface
This object configures number of wires that are operational for
this span. The following values are defined for this object:
twoWire(1) - 2-wire mode
fourWire(2) - 4-wire mode
sixWire(3) - 6-wire mod…
Enumerationr/w
Enumerated Values:
1twoWire
2fourWire
3sixWire
4eightWire
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.1
pdnHdsl2ShdslSpanConfMinLineRate
This object configures the minimum transmission rate,
in multiples of 64 kbits per second, for the associated
DSL Line in bits-per-second (bps). If the minimum line rate
equals the maximum line rate (pdnHdsl2ShdslSpan…
bpsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.2
pdnHdsl2ShdslSpanConfMaxLineRate
This object configures the maximum transmission rate, in
multiples of 64 kbits per second, for the associated DSL Line
in bits-per-second (bps). If the minimum line rate (pdnHdsl2Shdsl-
SpanConfMinLineRate) equals the …
bpsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.3

pdnHdsl2ShdslIfTable

table
.1.3.6.1.4.1.1795.2.24.2.6.23.1.7 · 1 row entry · 1 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnHdsl2ShdslIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-HDSL2-SHDSL-LINE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-HDSL2-SHDSL-LINE-MIB::pdnHdsl2ShdslIfTable' 
This table provides objects related to a particular interface
and each entry corresponds to an ifIndex.
pdnHdsl2ShdslIfEntry row .1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1
An entry in the pdnHdsl2ShdslIfTableTable.
Indexes
Column Syntax OID
pdnHdsl2ShdslIfTableEquipMode
This object allows the mode of the equipment to be set.
Enumerationr/w
Enumerated Values:
1coMode
2cpeMode
 .1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1.1