Standard view Table view

PDN-HDSL2-SHDSL-LINE-MIB

        The primary purpose of this MIB is to allow support of G.shdsl.bis based 
on the ITU Temporary Document, DC-R15, April 2003, until such a time
as the `standard' MIB, HDSL2-SHDSL-LINE-MIB, RFC 3276, May 2002 is
updated to support G.shdsl.bis. In addition to providing support for
G.shdsl.bis, this MIB may support SHDSL objects that are unique to the
enterprise.
        
Decisions as far as how this MIB is supported with respect to the 
`standard' MIB will be made in an individual basis by those involved 
with specific projects; those decisions are not dictated here.
        
The following documents should be referenced with respect to this MIB:
[G.991.2]     ITU-T G991.2 `Single-pair high-speed digital subscriber 
              line (SHDSL) transceivers,' December 2003.
[DC-R15]      ITU Study Group 15 Temporary Document `G.shdsl.bis: Draft
              Text`, April 2003.
[RFC 3276]    Ray, B., Abbi, R. `HDSL2-SHDSL-LINE-MIB', May 2002.
        
=====================================================================
==                                                                 ==
==            Copyright (C) 2004 Paradyne Corporation.             ==
==                                                                 ==
=====================================================================

Source file: PDN-HDSL2-SHDSL-LINE-MIB
Last revised: 28 Jan 2005, 00:00 UTC
Identity: pdnHdsl2ShdslLineMIB
Base OID: 1.3.6.1.4.1.1795.2.24.2.6.23

Imported Objects

HDSL2-SHDSL-LINE-MIB	Hdsl2Shdsl1DayIntervalCount hdsl2ShdslEndpointSide hdsl2ShdslEndpointThreshCRCanomalies hdsl2ShdslEndpointThreshES hdsl2ShdslEndpointThreshLoopAttenuation hdsl2ShdslEndpointThreshLOSWS hdsl2ShdslEndpointThreshSES hdsl2ShdslEndpointThreshSNRMargin hdsl2ShdslEndpointThreshUAS hdsl2ShdslInvIndex Hdsl2ShdslPerfCurrDayCount Hdsl2ShdslPerfTimeElapsed hdsl2ShdslSpanConfProfileName
IF-MIB	ifIndex
PDN-HEADER-MIB	pdn-interfaces
PerfHist-TC-MIB	PerfCurrentCount PerfIntervalCount
SNMP-FRAMEWORK-MIB	SnmpAdminString
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC	TEXTUAL-CONVENTION (no object page)

Net-SNMP examples using the paradyne MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'PDN-HDSL2-SHDSL-LINE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PDN-HDSL2-SHDSL-LINE-MIB::pdnHdsl2ShdslLineMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-HDSL2-SHDSL-LINE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-HDSL2-SHDSL-LINE-MIB::pdnHdsl2ShdslLineMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (66)

pdnHdsl2ShdslLineMIB		`.1.3.6.1.4.1.1795.2.24.2.6.23`
pdnHdsl2ShdslLineNotifications		`.1.3.6.1.4.1.1795.2.24.2.6.23.0`
pdnHdsl2ShdslLineObjects		`.1.3.6.1.4.1.1795.2.24.2.6.23.1`
pdnHdsl2ShdslSpanStatusExtTable		`.1.3.6.1.4.1.1795.2.24.2.6.23.1.1`
pdnHdsl2ShdslSpanStatusExtEntry	IF-MIBifIndex	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1`
pdnHdsl2ShdslStatusMaxAttainableLineRate	bpsSNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.1`
pdnHdsl2ShdslStatusActualLineRate	bpsSNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.2`
pdnHdsl2ShdslEndpointConfTable		`.1.3.6.1.4.1.1795.2.24.2.6.23.1.2`
pdnHdsl2ShdslEndpointConfEntry	IF-MIBifIndexHDSL2-SHDSL-LINE-MIBhdsl2ShdslInvIndexHDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointSidepdnHdsl2ShdslEndpointWirePair	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1`
pdnHdsl2ShdslEndpointWirePair	PdnHdsl2ShdslWirePair	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.1`
pdnHdsl2ShdslEndpointAlarmConfProfile r/w	OctetString	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.2`
pdnHdsl2ShdslEndpointCurrTable		`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3`
pdnHdsl2ShdslEndpointCurrEntry	IF-MIBifIndexHDSL2-SHDSL-LINE-MIBhdsl2ShdslInvIndexHDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointSidepdnHdsl2ShdslEndpointWirePair	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1`
pdnHdsl2ShdslEndpointCurrAtn	dBInteger32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.1`
pdnHdsl2ShdslEndpointCurr15MinES	secondsPerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.10`
pdnHdsl2ShdslEndpointCurr15MinSES	secondsPerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.11`
pdnHdsl2ShdslEndpointCurr15MinCRCanomalies	detected CRC AnomaliesPerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.12`
pdnHdsl2ShdslEndpointCurr15MinLOSWS	secondsPerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.13`
pdnHdsl2ShdslEndpointCurr15MinUAS	secondsPerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.14`
pdnHdsl2ShdslEndpointCurr1DayTimeElapsed	secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfTimeElapsed	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.15`
pdnHdsl2ShdslEndpointCurr1DayES	secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.16`
pdnHdsl2ShdslEndpointCurr1DaySES	secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.17`
pdnHdsl2ShdslEndpointCurr1DayCRCanomalies	detected CRC AnomaliesHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.18`
pdnHdsl2ShdslEndpointCurr1DayLOSWS	secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.19`
pdnHdsl2ShdslEndpointCurrSnrMgn	dBInteger32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.2`
pdnHdsl2ShdslEndpointCurr1DayUAS	secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfCurrDayCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.20`
pdnHdsl2ShdslEndpointCurrStatus	Bits	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.3`
pdnHdsl2ShdslEndpointES	secondsSNMPv2-SMICounter32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.4`
pdnHdsl2ShdslEndpointSES	secondsSNMPv2-SMICounter32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.5`
pdnHdsl2ShdslEndpointCRCanomalies	detected CRC AnomaliesSNMPv2-SMICounter32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.6`
pdnHdsl2ShdslEndpointLOSWS	secondsSNMPv2-SMICounter32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.7`
pdnHdsl2ShdslEndpointUAS	secondsSNMPv2-SMICounter32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.8`
pdnHdsl2ShdslEndpointCurr15MinTimeElapsed	secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfTimeElapsed	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.9`
pdnHdsl2Shdsl15MinIntervalTable		`.1.3.6.1.4.1.1795.2.24.2.6.23.1.4`
pdnHdsl2Shdsl15MinIntervalEntry	IF-MIBifIndexHDSL2-SHDSL-LINE-MIBhdsl2ShdslInvIndexHDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointSidepdnHdsl2ShdslEndpointWirePairpdnHdsl2Shdsl15MinIntervalNumber	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1`
pdnHdsl2Shdsl15MinIntervalNumber	Unsigned32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.1`
pdnHdsl2Shdsl15MinIntervalES	secondsPerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.2`
pdnHdsl2Shdsl15MinIntervalSES	secondsPerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.3`
pdnHdsl2Shdsl15MinIntervalCRCanomalies	detected CRC AnomaliesPerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.4`
pdnHdsl2Shdsl15MinIntervalLOSWS	secondsPerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.5`
pdnHdsl2Shdsl15MinIntervalUAS	secondsPerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.6`
pdnHdsl2Shdsl1DayIntervalTable		`.1.3.6.1.4.1.1795.2.24.2.6.23.1.5`
pdnHdsl2Shdsl1DayIntervalEntry	IF-MIBifIndexHDSL2-SHDSL-LINE-MIBhdsl2ShdslInvIndexHDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointSidepdnHdsl2ShdslEndpointWirePairpdnHdsl2Shdsl1DayIntervalNumber	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1`
pdnHdsl2Shdsl1DayIntervalNumber	Unsigned32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.1`
pdnHdsl2Shdsl1DayIntervalMoniSecs	secondsHDSL2-SHDSL-LINE-MIBHdsl2ShdslPerfTimeElapsed	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.2`
pdnHdsl2Shdsl1DayIntervalES	secondsHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.3`
pdnHdsl2Shdsl1DayIntervalSES	secondsHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.4`
pdnHdsl2Shdsl1DayIntervalCRCanomalies	detected CRC AnomaliesHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.5`
pdnHdsl2Shdsl1DayIntervalLOSWS	secondsHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.6`
pdnHdsl2Shdsl1DayIntervalUAS	secondsHDSL2-SHDSL-LINE-MIBHdsl2Shdsl1DayIntervalCount	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.7`
pdnHdsl2ShdslSpanConfProfileExtTable		`.1.3.6.1.4.1.1795.2.24.2.6.23.1.6`
pdnHdsl2ShdslSpanConfProfileExtEntry	HDSL2-SHDSL-LINE-MIBhdsl2ShdslSpanConfProfileName	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1`
pdnHdsl2ShdslSpanConfWireInterface r/w	Enumeration	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.1`
pdnHdsl2ShdslSpanConfMinLineRate r/w	bpsSNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.2`
pdnHdsl2ShdslSpanConfMaxLineRate r/w	bpsSNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.3`
pdnHdsl2ShdslIfTable		`.1.3.6.1.4.1.1795.2.24.2.6.23.1.7`
pdnHdsl2ShdslIfEntry	IF-MIBifIndex	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1`
pdnHdsl2ShdslIfTableEquipMode r/w	Enumeration	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1.1`
pdnHdsl2ShdslExtendedRateMode r/w	Enumeration	`.1.3.6.1.4.1.1795.2.24.2.6.23.1.8`
pdnHdsl2ShdslLineAFNs		`.1.3.6.1.4.1.1795.2.24.2.6.23.2`
pdnHdsl2ShdslLineConformance		`.1.3.6.1.4.1.1795.2.24.2.6.23.3`
pdnHdsl2ShdslLineCompliances		`.1.3.6.1.4.1.1795.2.24.2.6.23.3.1`
pdnHdsl2ShdslLineGroups		`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2`
pdnHdsl2ShdslLineObjGroups		`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1`
pdnHdsl2ShdslLineAfnGroups		`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.2`
pdnHdsl2ShdslLineNtfyGroups		`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3`

Dependencies (11) 8 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

PDN-HDSL2-SHDSL-LINE-MIBparadyneselected
- HDSL2-SHDSL-LINE-MIBrfcdefault fallback13 symbols
  - IF-MIBrfc1 symbol
    - IANAifType-MIBrfc1 symbol
      - SNMPv2-SMIrfc2 symbols
      - SNMPv2-TCrfc1 symbol
        SNMPv2-SMIrfcshared1 symbol
    - SNMPv2-CONFrfc3 symbols
      - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-MIBrfc1 symbol
      - SNMPv2-CONFrfcshared3 symbols
      - SNMPv2-SMIrfcshared7 symbols
      - SNMPv2-TCrfcshared3 symbols
    - SNMPv2-SMIrfcshared9 symbols
    - SNMPv2-TCrfcshared8 symbols
  - PerfHist-TC-MIBrfc2 symbols
    - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMP-FRAMEWORK-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared2 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-SMIrfcshared8 symbols
  - SNMPv2-TCrfcshared2 symbols
- IF-MIBrfcdefault fallbackshared1 symbol
- PDN-HEADER-MIBparadyne1 symbol
  - RFC1155-SMIrfcdefault fallback1 symbol
- PerfHist-TC-MIBrfcdefault fallbackshared2 symbols
- SNMP-FRAMEWORK-MIBrfcdefault fallbackshared1 symbol
- SNMPv2-CONFrfcdefault fallbackshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared6 symbols
- SNMPv2-TCrfcdefault fallbackshared1 symbol

Dependency-first compile order

SNMPv2-SMIrfc
SNMPv2-TCrfc
IANAifType-MIBrfc
SNMPv2-CONFrfc
SNMPv2-MIBrfc
IF-MIBrfc
PerfHist-TC-MIBrfc
SNMP-FRAMEWORK-MIBrfc
HDSL2-SHDSL-LINE-MIBrfc
RFC1155-SMIrfc
PDN-HEADER-MIBparadyne
PDN-HDSL2-SHDSL-LINE-MIBparadyneselected

Type Definitions (1)

PdnHdsl2ShdslWirePair	Enumeration	`wirePair1(1)` `wirePair2(2)` `wirePair3(3)` `wirePair4(4)`

Conformance Groups (9)

pdnHdsl2ShdslSpanShdslStatusGroup	pdnHdsl2ShdslStatusMaxAttainableLineRate pdnHdsl2ShdslStatusActualLineRate This group supports objects for retrieving SHDSL-specific span related status.	`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.1`
pdnHdsl2ShdslEndpointConfGroup	pdnHdsl2ShdslEndpointAlarmConfProfile This group supports objects for configuring parameters for segment endpoints in SHDSL lines.	`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.2`
pdnHdsl2ShdslEndpointCurrGroup	pdnHdsl2ShdslEndpointCurrAtn pdnHdsl2ShdslEndpointCurrSnrMgn pdnHdsl2ShdslEndpointCurrStatus pdnHdsl2ShdslEndpointES pdnHdsl2ShdslEndpointSES pdnHdsl2ShdslEndpointCRCanomalies pdnHdsl2ShdslEndpointLOSWS pdnHdsl2ShdslEndpointUAS pdnHdsl2ShdslEndpointCurr15MinTimeElapsed pdnHdsl2ShdslEndpointCurr15MinES pdnHdsl2ShdslEndpointCurr15MinSES pdnHdsl2ShdslEndpointCurr15MinCRCanomalies pdnHdsl2ShdslEndpointCurr15MinLOSWS pdnHdsl2ShdslEndpointCurr15MinUAS pdnHdsl2ShdslEndpointCurr1DayTimeElapsed pdnHdsl2ShdslEndpointCurr1DayES pdnHdsl2ShdslEndpointCurr1DaySES pdnHdsl2ShdslEndpointCurr1DayCRCanomalies pdnHdsl2ShdslEndpointCurr1DayLOSWS pdnHdsl2ShdslEndpointCurr1DayUAS This group supports objects which provide current status and performance measurements relating to segment endpoints in DSL lines.	`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.3`
pdnHdsl2Shdsl15MinIntervalGroup	pdnHdsl2Shdsl15MinIntervalES pdnHdsl2Shdsl15MinIntervalSES pdnHdsl2Shdsl15MinIntervalCRCanomalies pdnHdsl2Shdsl15MinIntervalLOSWS pdnHdsl2Shdsl15MinIntervalUAS This group supports objects which maintain historic performance measurements relating to segment endpoints in DSL lines.	`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.4`
pdnHdsl2Shdsl1DayIntervalGroup	pdnHdsl2Shdsl1DayIntervalMoniSecs pdnHdsl2Shdsl1DayIntervalES pdnHdsl2Shdsl1DayIntervalSES pdnHdsl2Shdsl1DayIntervalCRCanomalies pdnHdsl2Shdsl1DayIntervalLOSWS pdnHdsl2Shdsl1DayIntervalUAS This group supports objects which maintain historic performance measurements relating to segment endpoints in DSL line in 1-day intervals.	`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.5`
pdnHdsl2ShdslSpanConfProfileGroup	pdnHdsl2ShdslSpanConfWireInterface pdnHdsl2ShdslSpanConfMinLineRate pdnHdsl2ShdslSpanConfMaxLineRate This group supports objects that constitute configuration profiles for configuring span related parameters in DSL lines.	`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.6`
pdnHdsl2ShdslIfTableGroup	pdnHdsl2ShdslIfTableEquipMode This group supports objects on a per-interface basis.	`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.7`
pdnHdsl2ShdslExtendedRateModeGroup	pdnHdsl2ShdslExtendedRateMode This group supports objects to select the extended base data rate mode.	`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.8`
pdnHdsl2ShdslNotificationGroup	pdnHdsl2ShdslLoopAttenCrossing pdnHdsl2ShdslSNRMarginCrossing pdnHdsl2ShdslPerfESThresh pdnHdsl2ShdslPerfSESThresh pdnHdsl2ShdslPerfCRCanomaliesThresh pdnHdsl2ShdslPerfLOSWSThresh pdnHdsl2ShdslPerfUASThresh pdnHdsl2ShdslpowerBackoff pdnHdsl2ShdsldeviceFault pdnHdsl2ShdsldcContinuityFault pdnHdsl2ShdslconfigInitFailure pdnHdsl2ShdslprotocolInitFailure pdnHdsl2ShdslnoNeighborPresent This group supports notifications of significant conditions associated with DSL lines.	`.1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3.1`

Compliance Statements (1)

OID .1.3.6.1.4.1.1795.2.24.2.6.23.3.1.1

The compliance statement for pdnHdsl2ShdslLineMIB entities which
implement the pdnHdsl2ShdslLineMIB.

Required groups

optional	pdnHdsl2ShdslSpanShdslStatusGroup	This group is only required for G.shdsl.bis implementations and where the `standard' MIB does not support G.shdsl.bis.
optional	pdnHdsl2ShdslEndpointConfGroup	This group is only required for G.shdsl.bis implementations and where the `standard' MIB does not support G.shdsl.bis.
optional	pdnHdsl2ShdslEndpointCurrGroup	This group is only required for G.shdsl.bis implementations and where the `standard' MIB does not support G.shdsl.bis.
optional	pdnHdsl2Shdsl15MinIntervalGroup	This group is only required for G.shdsl.bis implementations and where the `standard' MIB does not support G.shdsl.bis.
optional	pdnHdsl2Shdsl1DayIntervalGroup	This group is only required for G.shdsl.bis implementations and where the `standard' MIB does not support G.shdsl.bis.
optional	pdnHdsl2ShdslSpanConfProfileGroup	This group is only required for G.shdsl.bis implementations and where the `standard' MIB does not support G.shdsl.bis.
optional	pdnHdsl2ShdslIfTableGroup	This group is only required if the relevant objects are need on a per-interface basis.
optional	pdnHdsl2ShdslExtendedRateModeGroup	This group is only required if the hardware implementation requires a different configuration to support higher rates such as G.991.2 Annex F. The object(s) in this group serve to indicate if extended base data rates are desired.
optional	pdnHdsl2ShdslNotificationGroup	This group is only required for G.shdsl.bis implementations and where the `standard' MIB does not support G.shdsl.bis.

Notifications / Traps (13)

Name	OID	Description
pdnHdsl2ShdslLoopAttenCrossing pdnHdsl2ShdslEndpointCurrAtn HDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointThreshLoopAttenuation	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.1`	This notification indicates that the loop attenuation threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been reached/exceeded for the DSL segment endpoint.
pdnHdsl2ShdsldcContinuityFault pdnHdsl2ShdslEndpointCurrStatus	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.10`	This notification indicates that the bit setting for dcContinuityFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
pdnHdsl2ShdslconfigInitFailure pdnHdsl2ShdslEndpointCurrStatus	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.11`	This notification indicates that the bit setting for configInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
pdnHdsl2ShdslprotocolInitFailure pdnHdsl2ShdslEndpointCurrStatus	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.12`	This notification indicates that the bit setting for protocolInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
pdnHdsl2ShdslnoNeighborPresent pdnHdsl2ShdslEndpointCurrStatus	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.13`	This notification indicates that the bit setting for noNeighborPresent in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
pdnHdsl2ShdslSNRMarginCrossing pdnHdsl2ShdslEndpointCurrSnrMgn HDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointThreshSNRMargin	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.2`	This notification indicates that the SNR margin threshold (as per the hdsl2ShdslEndpointThreshSNRMargin value) has been reached/exceeded for the DSL segment endpoint.
pdnHdsl2ShdslPerfESThresh pdnHdsl2ShdslEndpointCurr15MinES HDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointThreshES	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.3`	This notification indicates that the errored seconds threshold (as per the hdsl2ShdslEndpointThreshES value) has been reached/ exceeded for the DSL segment endpoint.
pdnHdsl2ShdslPerfSESThresh pdnHdsl2ShdslEndpointCurr15MinSES HDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointThreshSES	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.4`	This notification indicates that the severely errored seconds threshold (as per the hdsl2ShdslEndpointThreshSES value) has been reached/exceeded for the DSL Segment Endpoint.
pdnHdsl2ShdslPerfCRCanomaliesThresh pdnHdsl2ShdslEndpointCurr15MinCRCanomalies HDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointThreshCRCanomalies	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.5`	This notification indicates that the CRC anomalies threshold (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has been reached/exceeded for the DSL Segment Endpoint.
pdnHdsl2ShdslPerfLOSWSThresh pdnHdsl2ShdslEndpointCurr15MinLOSWS HDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointThreshLOSWS	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.6`	This notification indicates that the LOSW seconds threshold (as per the hdsl2ShdslEndpointThreshLOSWS value) has been reached/exceeded for the DSL segment endpoint.
pdnHdsl2ShdslPerfUASThresh pdnHdsl2ShdslEndpointCurr15MinUAS HDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointThreshUAS	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.7`	This notification indicates that the unavailable seconds threshold (as per the hdsl2ShdslEndpointThreshUAS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint.
pdnHdsl2ShdslpowerBackoff pdnHdsl2ShdslEndpointCurrStatus	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.8`	This notification indicates that the bit setting for powerBackoff in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
pdnHdsl2ShdsldeviceFault pdnHdsl2ShdslEndpointCurrStatus	`.1.3.6.1.4.1.1795.2.24.2.6.23.0.9`	This notification indicates that the bit setting for deviceFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed.