PDN-ENTITY-REDUNDANCY-MIB

        This management information module supports the
objects to be used for redundancy of entities.
    
Source file
PDN-ENTITY-REDUNDANCY-MIB
Last revised
Identity
pdnEntRedunMIB
Base OID
1.3.6.1.4.1.1795.2.24.2.41.1
Imported Objects
ENTITY-MIB entPhysicalIndex
PDN-HEADER-MIB pdnEntityRedundancy
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the paradyne MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PDN-ENTITY-REDUNDANCY-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PDN-ENTITY-REDUNDANCY-MIB::pdnEntRedunMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-ENTITY-REDUNDANCY-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-ENTITY-REDUNDANCY-MIB::pdnEntRedunMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (19)
.1.3.6.1.4.1.1795.2.24.2.41.1
.1.3.6.1.4.1.1795.2.24.2.41.1.1
Enumeration
.1.3.6.1.4.1.1795.2.24.2.41.1.1.1
Enumeration
.1.3.6.1.4.1.1795.2.24.2.41.1.1.2
.1.3.6.1.4.1.1795.2.24.2.41.1.1.3
.1.3.6.1.4.1.1795.2.24.2.41.1.1.4
.1.3.6.1.4.1.1795.2.24.2.41.1.1.4.1
.1.3.6.1.4.1.1795.2.24.2.41.1.1.4.1.1
.1.3.6.1.4.1.1795.2.24.2.41.1.1.5
.1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1
.1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.1
.1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.2
.1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.3
.1.3.6.1.4.1.1795.2.24.2.41.1.1.6
.1.3.6.1.4.1.1795.2.24.2.41.1.2
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0
.1.3.6.1.4.1.1795.2.24.2.41.1.3
.1.3.6.1.4.1.1795.2.24.2.41.1.3.1
.1.3.6.1.4.1.1795.2.24.2.41.1.3.2
Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (4)
Bits
noAlarm(0)
linkDefect(1)
hwFailure(2)
hwMissing(3)
hwIncompatible(4)
fwIncompatible(5)
cfgIncompatible(6)
Enumeration
noCmd(1)
switch(2)
forcedswitch(3)
Bits
noAlarm(0)
noActiveModule(1)
standbyAlarmOrReset(2)
Enumeration
activeState(1)
activeAlarmState(2)
standbyState(3)
standbyAlarmState(4)
Conformance Groups (3)
A collection of general configuration objects
for the entity redundancy implementation.
.1.3.6.1.4.1.1795.2.24.2.41.1.3.2.1
A collection of configuration objects
applicable to redundancy implementations.
.1.3.6.1.4.1.1795.2.24.2.41.1.3.2.2
A collection of redundancy notifications.
.1.3.6.1.4.1.1795.2.24.2.41.1.3.2.3
Compliance Statements (1)

OID .1.3.6.1.4.1.1795.2.24.2.41.1.3.1.1
The compliance statement for SNMP entities which
manage the configuration parameters on entities
used for redundancy.
Required groups
mandatory pdnRedundancyGeneralGroup
optional pdnEntityRedundancyOptGroup Implementation of this group is optional for the
redundancy management implementation.
optional pdnEntityRedundancyEventGroup Implementation of this group is optional for the
notification implementation.
Object refinements
ObjectAccessSyntaxDescription
pdnEntityRedundancySelection readonly
Write access is not required.
pdnRedunCommand readonly
Write access is not required.
pdnRedunNotificationEnable readonly
Write access is not required.
Notifications / Traps (8)
NameOIDDescription
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.1
This notification will be issued when no module
is in the Active State.
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.2
This notification will be issued when the modules
in a redundancy configuration present hardware
incompatibilities.
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.3
This notification will be issued when one of the
modules configured for redundancy is either in the
Standby/Alarm or Reset Test state.
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.4
This notification will be issued when the modules
in a redundancy configuration present firmware
incompatibilities.
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.5
This notification will be issued when the modules
in a redundancy configuration present configuration
incompatibilities.
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.6
This notification will be issued when a module
in a redundancy configuration has a link condition.
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.7
This notification will be issued when a module
in a redundancy configuration has a hardware
failure condition.
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.8
This notification will be issued when a module
in a redundancy configuration is expecting a
piece of hw to be used for redundancy which can
not be found or is not operational.