PDN-ATMM4EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
32

pdnAtmfM4TcProtoCurrExtTable

table
.1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnAtmfM4TcProtoCurrExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-ATMM4EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-ATMM4EXT-MIB::pdnAtmfM4TcProtoCurrExtTable' 
The Paradyne Extension to the atmfM4TcProtoCurrTable of the
ATM-FORUM-SNMP-M4-MIB.
pdnAtmfM4TcProtoCurrExtEntry row .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1
The Paradyne Extension to the atmfM4TcProtoCurrTable of the
ATM-FORUM-SNMP-M4-MIB.
Indexes
No indexes recorded
Column Syntax OID
pdnAtmfM4TcProtoCurrCellIns
The number of ATM cells received on this interface since the
start of this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.1
pdnAtmfM4TcProtoCurrCellOuts
The number of ATM cells sent on this interface since the
start of this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.2
pdnAtmfM4TcProtoCurrInDiscards
The number of RX ATM cells dropped on this interface since the
start of this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.3
pdnAtmfM4TcProtoCurrOutDiscards
The number of TX ATM cells dropped on this interface since the
start of this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.4
pdnAtmfM4TcProtoCurrLCDEvents
The number of Loss of Cell Delineation (LCD) event occurred
on this interface since the start of this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.5
pdnAtmfM4TcProtoCurrUnknownCells
The number of unknown Cells received on this interface since
the start of this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.6
pdnAtmfM4TcProtoCurrCorrectedHEC
The number of Cell with corrected HEC received on this interface
since the start of this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.7

pdnAtmfM4TcProtoHistExtTable

table
.1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnAtmfM4TcProtoHistExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-ATMM4EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-ATMM4EXT-MIB::pdnAtmfM4TcProtoHistExtTable' 
The Paradyne Extension to the atmfM4TcProtoHistTable of the
ATM-FORUM-SNMP-M4-MIB.
pdnAtmfM4TcProtoHistExtEntry row .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1
The Paradyne Extension to the atmfM4TcProtoHistTable of the
ATM-FORUM-SNMP-M4-MIB.
Indexes
No indexes recorded
Column Syntax OID
pdnAtmfM4TcProtoHistCellIns
The number of ATM cells received on this interface
during this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.1
pdnAtmfM4TcProtoHistCellOuts
The number of ATM cells sent on this interface during
this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.2
pdnAtmfM4TcProtoHistInDiscards
The number of RX ATM cells dropped on this interface
during this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.3
pdnAtmfM4TcProtoHistOutDiscards
The number of TX ATM cells dropped on this interface
during this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.4
pdnAtmfM4TcProtoHistLCDEvents
The number of Loss of Cell Delineation (LCD) event occurred
on this interface during this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.5
pdnAtmfM4TcProtoHistUnknownCells
The number of unknown Cells received on this interface since
the start of this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.6
pdnAtmfM4TcProtoHistCorrectedHEC
The number of Cell with corrected HEC received on this interface
during this interval
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.7

pdnAtmfM4VcLoopbackTestTable

table
.1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnAtmfM4VcLoopbackTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-ATMM4EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-ATMM4EXT-MIB::pdnAtmfM4VcLoopbackTestTable' 
This table contains input and results for OAM loopback 
tests. There can be only one test running per ATM VCC 
This table should be used in conjunction with atmfM4VcTestTable
with all the semantics of atmfM4VcTestTable.
pdnAtmfM4VcLoopbackTestEntry row .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1
An entry containing objects for test results
for ATM OAM loopback test
Indexes
No indexes recorded
Column Syntax OID
pdnAtmfM4VcLoopbackTestElpsTime
This object contains the time that has elapsed since the test started.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.1
pdnAtmfM4VcLoopbackTestCellsSent
This object specifies a count of the number of test cells that
have been sent. The value of this object stops increasing
when it reaches its maximum value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.2
pdnAtmfM4VcLoopbackTestCellsRcvd
This object specifies a count of the number of test cells that
have been received. The value of this object stops increasing
when it reaches its maximum value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.3
pdnAtmfM4VcLoopbackTestMinRTDelay
This object contains the value of the shortest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.4
pdnAtmfM4VcLoopbackTestMaxRTDelay
This object contains the value of the longest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.5
pdnAtmfM4VcLoopbackTestAvgRTDelay
This object contains the value of the average round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.6
pdnAtmfM4VcLoopbackTestErrorCode
This object contains the specific error code on the test result.
PdnAtmfM4TestErrorCode
Type Values:
0noError
1badIfIndex
2noVccFound
3notOwner
4noResourceAvailable
5noLoopbackAllocated
6testCompleted
7testTimeOut
8adminStatusDisabled
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.7

pdnAtmfM4Vc1CellLoopTable

table
.1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5 · 1 row entry · 3 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnAtmfM4Vc1CellLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-ATMM4EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-ATMM4EXT-MIB::pdnAtmfM4Vc1CellLoopTable' 
This table contains input and results for single cell OAM
loopback tests. There can be only one test running per ATM VCC 
This table should be used in conjunction with atmfM4VcTestTable
with all the semantics of atmfM4VcTestTable.
pdnAtmfM4Vc1CellLoopEntry row .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1
An entry containing objects for test results
for a single cell ATM OAM loopback test
Indexes
No indexes recorded
Column Syntax OID
pdnAtmfM4Vc1CellLoopRTDelay
This object contains the value of the round trip delay of the
the test cell. A value of zero indicates that no cell has been
received.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.1
pdnAtmfM4Vc1CellLoopReportedLocation
This object contains the value of the location identifier
reported by the received cell.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.2
pdnAtmfM4Vc1CellLoopErrorCode
This object contains the specific error code on the test result.
PdnAtmfM4TestErrorCode
Type Values:
0noError
1badIfIndex
2noVccFound
3notOwner
4noResourceAvailable
5noLoopbackAllocated
6testCompleted
7testTimeOut
8adminStatusDisabled
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.3

pdnAtmfM4LoopbackLocationTable

table
.1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6 · 1 row entry · 1 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnAtmfM4LoopbackLocationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-ATMM4EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-ATMM4EXT-MIB::pdnAtmfM4LoopbackLocationTable' 
This table contains the ATM OAM loopback location codes
for ATM cell layer interfaces.
pdnAtmfM4LoopbackLocationEntry row .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1
An entry containing objects for ATM OAM loopback locations.
Indexes
Column Syntax OID
pdnAtmfM4LoopbackLocationCode
This object contains the value of ATM OAM Loopback Location Code
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1.1

pdnAtmfM4VpLoopbackTestTable

table
.1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7 · 1 row entry · 7 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk pdnAtmfM4VpLoopbackTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-ATMM4EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-ATMM4EXT-MIB::pdnAtmfM4VpLoopbackTestTable' 
This table contains input and results for OAM loopback 
tests. There can be only one test running per ATM VPC
This table should be used in conjunction with atmfM4VpTestTable
with all the semantics of atmfM4VpTestTable.
pdnAtmfM4VpLoopbackTestEntry row .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1
An entry containing objects for test results
for ATM OAM loopback test
Indexes
No indexes recorded
Column Syntax OID
pdnAtmfM4VpLoopbackTestElpsTime
This object contains the time that has elapsed since the test started.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.1
pdnAtmfM4VpLoopbackTestCellsSent
This object specifies a count of the number of test cells that
have been sent. The value of this object stops increasing
when it reaches its maximum value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.2
pdnAtmfM4VpLoopbackTestCellsRcvd
This object specifies a count of the number of test cells that
have been received. The value of this object stops increasing
when it reaches its maximum value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.3
pdnAtmfM4VpLoopbackTestMinRTDelay
This object contains the value of the shortest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.4
pdnAtmfM4VpLoopbackTestMaxRTDelay
This object contains the value of the longest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.5
pdnAtmfM4VpLoopbackTestAvgRTDelay
This object contains the value of the average round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.6
pdnAtmfM4VpLoopbackTestErrorCode
This object contains the specific error code on the test result.
PdnAtmfM4TestErrorCode
Type Values:
0noError
1badIfIndex
2noVccFound
3notOwner
4noResourceAvailable
5noLoopbackAllocated
6testCompleted
7testTimeOut
8adminStatusDisabled
 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.7