PCUBE-CONFIG-COPY-MIB
This MIB facilitates writing of running
configuration of the SCOS to
startup configuration.
A config-copy operation is a request to
copy a configuration file of a running
SCOS. The term 'agent-config' will
be used in this MIB to refer to either
the running config or the startup config.
The term SCE refers to Service Control Engine
- Source file
PCUBE-CONFIG-COPY-MIB- Last revised
- Identity
pcubeConfigCopyMIB- Base OID
1.3.6.1.4.1.5655.3.1
Imported Objects
| PCUBE-SMI | pcubeMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PCUBE-CONFIG-COPY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PCUBE-CONFIG-COPY-MIB::pcubeConfigCopyMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PCUBE-CONFIG-COPY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PCUBE-CONFIG-COPY-MIB::pcubeConfigCopyMIB'
Objects (12)
Showing 12 of 12 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.5655.3.1 |
||
.1.3.6.1.4.1.5655.3.1.1 |
||
.1.3.6.1.4.1.5655.3.1.1.1 |
||
.1.3.6.1.4.1.5655.3.1.1.1.1 |
||
.1.3.6.1.4.1.5655.3.1.1.1.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.5655.3.1.1.1.1.1.1 |
|
.1.3.6.1.4.1.5655.3.1.1.1.1.1.2 |
||
.1.3.6.1.4.1.5655.3.1.1.1.1.1.3 |
||
.1.3.6.1.4.1.5655.3.1.1.1.1.1.4 |
||
.1.3.6.1.4.1.5655.3.1.2 |
||
.1.3.6.1.4.1.5655.3.1.2.1 |
||
.1.3.6.1.4.1.5655.3.1.2.2 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- PCUBE-SMIcisco
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- PCUBE-CONFIG-COPY-MIBciscoselected
Type Definitions (1)
| Enumeration |
startupConfig(1)runningConfig(2) |
Conformance Groups (1)
|
A collection of objects used for specifying
the configuration of the copy operation. |
.1.3.6.1.4.1.5655.3.1.2.1.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.5655.3.1.2.2.1A compliance statement defined in this MIB module,
for SCE SNMP agents.
for SCE SNMP agents.
Required groups
| mandatory | pcubeCopyGroup |