PARALLEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
12

paraPortTable

table
.1.3.6.1.2.1.10.34.2 · 1 row entry · 4 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk paraPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PARALLEL-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PARALLEL-MIB::paraPortTable' 
A list of port entries.  The number of entries is
given by the value of paraNumber.
paraPortEntry row .1.3.6.1.2.1.10.34.2.1
Status and parameter values for a port.
Indexes
Column Syntax OID
paraPortIndex
The value of ifIndex for the port. By convention
and if possible, hardware port numbers map directly
to external connectors. The value for each port must
remain constant at least from one re-initialization
of the netw…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.34.2.1.1
paraPortType
The port's hardware type.
Enumeration
Enumerated Values:
1other
2centronics
3dataproducts
 .1.3.6.1.2.1.10.34.2.1.2
paraPortInSigNumber
The number of input signals for the port in the
input signal table (paraPortInSigTable). The table
contains entries only for those signals the software
can detect and that are useful to observe.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.34.2.1.3
paraPortOutSigNumber
The number of output signals for the port in the
output signal table (paraPortOutSigTable). The
table contains entries only for those signals the
software can assert and that are useful to observe.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.34.2.1.4

paraInSigTable

table
.1.3.6.1.2.1.10.34.3 · 1 row entry · 4 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk paraInSigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PARALLEL-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PARALLEL-MIB::paraInSigTable' 
A list of port input control signal entries.
paraInSigEntry row .1.3.6.1.2.1.10.34.3.1
Input control signal status for a hardware port.
Indexes
Column Syntax OID
paraInSigPortIndex
The value of paraPortIndex for the port to which
this entry belongs.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.34.3.1.1
paraInSigName
Identification of a hardware signal.
Enumeration
Enumerated Values:
1power
2online
3busy
4paperout
5fault
 .1.3.6.1.2.1.10.34.3.1.2
paraInSigState
The current signal state.
Enumeration
Enumerated Values:
1none
2on
3off
 .1.3.6.1.2.1.10.34.3.1.3
paraInSigChanges
The number of times the signal has changed from
'on' to 'off' or from 'off' to 'on'.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.34.3.1.4

paraOutSigTable

table
.1.3.6.1.2.1.10.34.4 · 1 row entry · 4 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk paraOutSigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PARALLEL-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PARALLEL-MIB::paraOutSigTable' 
A list of port output control signal entries.
paraOutSigEntry row .1.3.6.1.2.1.10.34.4.1
Output control signal status for a hardware port.
Indexes
Column Syntax OID
paraOutSigPortIndex
The value of paraPortIndex for the port to which
this entry belongs.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.34.4.1.1
paraOutSigName
Identification of a hardware signal.
Enumeration
Enumerated Values:
1power
2online
3busy
4paperout
5fault
 .1.3.6.1.2.1.10.34.4.1.2
paraOutSigState
The current signal state.
Enumeration
Enumerated Values:
1none
2on
3off
 .1.3.6.1.2.1.10.34.4.1.3
paraOutSigChanges
The number of times the signal has changed from
'on' to 'off' or from 'off' to 'on'.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.34.4.1.4