P-BRIDGE-MIB Table View

A table that contains information about every high-
capacity port that is associated with this transparent
bridge.

dot1dTpHCPortEntry row .1.3.6.1.2.1.17.4.5.1

Statistics information for each high-capacity port of a
transparent bridge.

Indexes

BRIDGE-MIBdot1dTpPort

Column	Syntax	OID
dot1dTpHCPortInFrames The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol bein…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.17.4.5.1.1
dot1dTpHCPortOutFrames The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.17.4.5.1.2
dot1dTpHCPortInDiscards Count of valid frames that have been received by this port from its segment that were discarded (i.e., filtered) by the Forwarding Process.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.17.4.5.1.3

A table that contains the most-significant bits of
statistics counters for ports that are associated with this
transparent bridge that are on high-capacity interfaces, as
defined in the conformance clauses for this table.  This table
is provided as a way to read 64-bit counters for agents that
support only SNMPv1.
          
Note that the reporting of most-significant and
least-significant counter bits separately runs the risk of
missing an overflow of the lower bits in the interval between
sampling.  The manager must be aware of this possibility, even
within the same varbindlist, when interpreting the results of
a request or asynchronous notification.

dot1dTpPortOverflowEntry row .1.3.6.1.2.1.17.4.6.1

The most significant bits of statistics counters for a high-
capacity interface of a transparent bridge. Each object is
associated with a corresponding object in dot1dTpPortTable
that indicates the least significant bi…

Indexes

BRIDGE-MIBdot1dTpPort

Column	Syntax	OID
dot1dTpPortInOverflowFrames The number of times the associated dot1dTpPortInFrames counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.4.6.1.1
dot1dTpPortOutOverflowFrames The number of times the associated dot1dTpPortOutFrames counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.4.6.1.2
dot1dTpPortInOverflowDiscards The number of times the associated dot1dTpPortInDiscards counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.4.6.1.3

A table that contains capabilities information about
every port that is associated with this bridge.

dot1dPortCapabilitiesEntry row .1.3.6.1.2.1.17.6.1.1.4.1

A set of capabilities information about this port
indexed by dot1dBasePort.

Indexes

No indexes recorded

Column	Syntax	OID
dot1dPortCapabilities Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis, that are implemented by this device, and that are manageable through this MIB. dot1qDot1qTagging(0), -- supports 802.1Q…	Bits Enumerated Values: 0 dot1qDot1qTagging 1 dot1qConfigurableAcceptableFrameTypes 2 dot1qIngressFiltering	.1.3.6.1.2.1.17.6.1.1.4.1.1

A table that contains information about every port that
is associated with this transparent bridge.

dot1dPortPriorityEntry row .1.3.6.1.2.1.17.6.1.2.1.1

A list of Default User Priorities for each port of a
transparent bridge. This is indexed by dot1dBasePort.

Indexes

No indexes recorded

Column	Syntax	OID
dot1dPortDefaultUserPriority The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. The value of this object MUST be retained across reinitializati…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.2.1.17.6.1.2.1.1.1
dot1dPortNumTrafficClasses The number of egress traffic classes supported on this port. This object may optionally be read-only. The value of this object MUST be retained across reinitializations of the management system.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.2.1.17.6.1.2.1.1.2

A list of Regenerated User Priorities for each received
User Priority on each port of a bridge.  The Regenerated
User Priority value may be used to index the Traffic
Class Table for each input port.  This only has effect
on media that support native User Priority.  The default
values for Regenerated User Priorities are the same as
the User Priorities.

dot1dUserPriorityRegenEntry row .1.3.6.1.2.1.17.6.1.2.2.1

A mapping of incoming User Priority to a Regenerated
User Priority.

Indexes

BRIDGE-MIBdot1dBasePort dot1dUserPriority

Column	Syntax	OID
dot1dUserPriority The User Priority for a frame received on this port.	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.17.6.1.2.2.1.1
dot1dRegenUserPriority The Regenerated User Priority that the incoming User Priority is mapped to for this port. The value of this object MUST be retained across reinitializations of the management system.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.2.1.17.6.1.2.2.1.2

A table mapping evaluated User Priority to Traffic
Class, for forwarding by the bridge.  Traffic class is a
number in the range (0..(dot1dPortNumTrafficClasses-1)).

dot1dTrafficClassEntry row .1.3.6.1.2.1.17.6.1.2.3.1

User Priority to Traffic Class mapping.

Indexes

BRIDGE-MIBdot1dBasePort dot1dTrafficClassPriority

Column	Syntax	OID
dot1dTrafficClassPriority The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. …	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.17.6.1.2.3.1.1
dot1dTrafficClass The Traffic Class the received frame is mapped to. The value of this object MUST be retained across reinitializations of the management system.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.2.1.17.6.1.2.3.1.2

A table mapping Regenerated User Priority to Outbound
Access Priority.  This is a fixed mapping for all port
types, with two options for 802.5 Token Ring.

dot1dPortOutboundAccessPriorityEntry row .1.3.6.1.2.1.17.6.1.2.4.1

Regenerated User Priority to Outbound Access Priority
mapping.

Indexes

BRIDGE-MIBdot1dBasePort dot1dRegenUserPriority

Column	Syntax	OID
dot1dPortOutboundAccessPriority The Outbound Access Priority the received frame is mapped to.	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.17.6.1.2.4.1.1

A table of GARP control information about every bridge
port.  This is indexed by dot1dBasePort.

dot1dPortGarpEntry row .1.3.6.1.2.1.17.6.1.3.1.1

GARP control information for a bridge port.

Indexes

No indexes recorded

Column	Syntax	OID
dot1dPortGarpJoinTime The GARP Join time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.17.6.1.3.1.1.1
dot1dPortGarpLeaveTime The GARP Leave time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.17.6.1.3.1.1.2
dot1dPortGarpLeaveAllTime The GARP LeaveAll time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.17.6.1.3.1.1.3

A table of GMRP control and status information about
every bridge port.  Augments the dot1dBasePortTable.

dot1dPortGmrpEntry row .1.3.6.1.2.1.17.6.1.4.1.1

GMRP control and status information for a bridge port.

Indexes

No indexes recorded

Column	Syntax	OID
dot1dPortGmrpStatus The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as dot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates tha…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.2.1.17.6.1.4.1.1.1
dot1dPortGmrpFailedRegistrations The total number of failed GMRP registrations, for any reason, in all VLANs, on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.6.1.4.1.1.2
dot1dPortGmrpLastPduOrigin The Source MAC Address of the last GMRP message received on this port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.17.6.1.4.1.1.3
dot1dPortRestrictedGroupRegistration The state of Restricted Group Registration on this port. If the value of this control is true(1), then creation of a new dynamic entry is permitted only if there is a Static Filtering Entry for the VLAN concerned, in wh…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.17.6.1.4.1.1.4