OSPFV3-MIB Table View

Information describing the configured
parameters and cumulative statistics of the router's
attached areas.  The interfaces and
virtual links are configured as part of these areas.
Area 0, by definition, is the backbone area.

ospfv3AreaEntry row .1.3.6.1.2.1.191.1.2.1

Information describing the configured
parameters and cumulative statistics of one of the
router's attached areas.

The information in this table is persistent,
and when written, the entity SHOULD save the a
…

Indexes

ospfv3AreaId

Column	Syntax	OID
ospfv3AreaId A 32-bit unsigned integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.	Ospfv3AreaIdTC Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.2.1.1
ospfv3AreaImportAsExtern Indicates whether an area is a stub area, NSSA, or standard area. AS-scope LSAs are not imported into stub areas or NSSAs. NSSAs import AS-External data as NSSA LSAs that have Area-scope.	Enumerationr/w Enumerated Values: 1 importExternal 2 importNoExternal 3 importNssa	.1.3.6.1.2.1.191.1.2.1.2
ospfv3AreaSpfRuns The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this coun…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.2.1.3
ospfv3AreaBdrRtrCount The total number of area border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First (SPF) pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.2.1.4
ospfv3AreaAsBdrRtrCount The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.2.1.5
ospfv3AreaScopeLsaCount The total number of Area-scope link state advertisements in this area's link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.2.1.6
ospfv3AreaScopeLsaCksumSum The 32-bit unsigned sum of the Area-scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determine if there has been a change in a router's link state datab…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.2.1.7
ospfv3AreaSummary The variable ospfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate In…	Enumerationr/w Enumerated Values: 1 noAreaSummary 2 sendAreaSummary	.1.3.6.1.2.1.191.1.2.1.8
ospfv3AreaRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.191.1.2.1.9
ospfv3AreaStubMetric The metric value advertised for the default route into stub and NSSA areas. By default, this equals the least metric among the interfaces to other areas.	OSPF-MIBBigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.2.1.191.1.2.1.10
ospfv3AreaNssaTranslatorRole Indicates an NSSA border router's policy to perform NSSA translation of NSSA-LSAs into AS-External-LSAs.	Enumerationr/w Enumerated Values: 1 always 2 candidate	.1.3.6.1.2.1.191.1.2.1.11
ospfv3AreaNssaTranslatorState Indicates if and how an NSSA border router is performing NSSA translation of NSSA-LSAs into AS-External-LSAs. When this object is set to 'enabled', the NSSA border router's ospfv3AreaNssaTranslatorRole has been set to …	Enumeration Enumerated Values: 1 enabled 2 elected 3 disabled	.1.3.6.1.2.1.191.1.2.1.12
ospfv3AreaNssaTranslatorStabInterval The stability interval defined as the number of seconds after an elected translator determines its services are no longer required that it should continue to perform its translation duties.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.2.1.13
ospfv3AreaNssaTranslatorEvents Indicates the number of Translator state changes that have occurred since the last start-up of the OSPFv3 routing process. Discontinuities in the value of this counter can occur at re-initialization of th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.2.1.14
ospfv3AreaStubMetricType This variable assigns the type of metric advertised as a default route.	Enumerationr/w Enumerated Values: 1 ospfv3Metric 2 comparableCost 3 nonComparable	.1.3.6.1.2.1.191.1.2.1.15
ospfv3AreaTEEnabled Indicates whether or not traffic engineering is enabled in the area. The object is set to the value true (1) to enable traffic engineering. Traffic engineering is disabled by default.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.2.1.16

The OSPFv3 Process's AS-scope link state database
(LSDB).  The LSDB contains the AS-scope link state
advertisements from throughout the areas that the
device is attached to.

ospfv3AsLsdbEntry row .1.3.6.1.2.1.191.1.3.1

A single AS-scope link state advertisement.

Indexes

ospfv3AsLsdbType ospfv3AsLsdbRouterId ospfv3AsLsdbLsid

Column	Syntax	OID
ospfv3AsLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. AS-scope LSAs not recognized by the router may be stored in the database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.191.1.3.1.1
ospfv3AsLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.3.1.2
ospfv3AsLsdbLsid The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressin…	Ospfv3LsIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.3.1.3
ospfv3AsLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more rece…	Ospfv3LsaSequenceTC	.1.3.6.1.2.1.191.1.3.1.4
ospfv3AsLsdbAge This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.	secondsOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.2.1.191.1.3.1.5
ospfv3AsLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.191.1.3.1.6
ospfv3AsLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.2.1.191.1.3.1.7
ospfv3AsLsdbTypeKnown The value true (1) indicates that the LSA type is recognized by this router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.3.1.8

The OSPFv3 Process's Area-scope LSDB.
The LSDB contains the Area-scope link state
advertisements from throughout the area that the
device is attached to.

ospfv3AreaLsdbEntry row .1.3.6.1.2.1.191.1.4.1

A single Area-scope link state advertisement.

Indexes

ospfv3AreaLsdbAreaId ospfv3AreaLsdbType ospfv3AreaLsdbRouterId ospfv3AreaLsdbLsid

Column	Syntax	OID
ospfv3AreaLsdbAreaId The 32-bit identifier of the Area from which the LSA was received.	Ospfv3AreaIdTC Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.4.1.1
ospfv3AreaLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Area-scope LSAs unrecognized by the router are also stored in this database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.191.1.4.1.2
ospfv3AreaLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.4.1.3
ospfv3AreaLsdbLsid The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressin…	Ospfv3LsIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.4.1.4
ospfv3AreaLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more rece…	Ospfv3LsaSequenceTC	.1.3.6.1.2.1.191.1.4.1.5
ospfv3AreaLsdbAge This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.	secondsOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.2.1.191.1.4.1.6
ospfv3AreaLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.191.1.4.1.7
ospfv3AreaLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.2.1.191.1.4.1.8
ospfv3AreaLsdbTypeKnown The value true (1) indicates that the LSA type is recognized by this router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.4.1.9

The OSPFv3 Process's Link-scope LSDB for non-virtual
interfaces.  The LSDB contains the Link-scope link
state advertisements from the interfaces that the
device is attached to.

ospfv3LinkLsdbEntry row .1.3.6.1.2.1.191.1.5.1

A single Link-scope link state advertisement.

Indexes

ospfv3LinkLsdbIfIndex ospfv3LinkLsdbIfInstId ospfv3LinkLsdbType ospfv3LinkLsdbRouterId ospfv3LinkLsdbLsid

Column	Syntax	OID
ospfv3LinkLsdbIfIndex The identifier of the link from which the LSA was received.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.191.1.5.1.1
ospfv3LinkLsdbIfInstId The identifier of the interface instance from which the LSA was received.	Ospfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.5.1.2
ospfv3LinkLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored in this database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.191.1.5.1.3
ospfv3LinkLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.5.1.4
ospfv3LinkLsdbLsid The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressin…	Ospfv3LsIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.5.1.5
ospfv3LinkLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more rece…	Ospfv3LsaSequenceTC	.1.3.6.1.2.1.191.1.5.1.6
ospfv3LinkLsdbAge This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.	secondsOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.2.1.191.1.5.1.7
ospfv3LinkLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.191.1.5.1.8
ospfv3LinkLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.2.1.191.1.5.1.9
ospfv3LinkLsdbTypeKnown The value true (1) indicates that the LSA type is recognized by this router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.5.1.10

The Host/Metric Table indicates what hosts are
directly attached to the router and their
corresponding metrics.

ospfv3HostEntry row .1.3.6.1.2.1.191.1.6.1

A metric to be advertised when a given host is
reachable.

The information in this table is persistent, and
when written, the entity SHOULD save the change
to non-volatile storage.

Indexes

ospfv3HostAddressType ospfv3HostAddress

Column	Syntax	OID
ospfv3HostAddressType The address type of ospfv3HostAddress. Only IPv6 global address type is expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.191.1.6.1.1
ospfv3HostAddress The IPv6 address of the host. Must be an IPv6 global address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.6.1.2
ospfv3HostMetric The metric to be advertised.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.191.1.6.1.3
ospfv3HostRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.191.1.6.1.4
ospfv3HostAreaID The Area the host entry is to be found within. By default, the area for the subsuming OSPFv3 interface, or Area 0 if there is no subsuming interface.	Ospfv3AreaIdTCr/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.6.1.5

The OSPFv3 Interface Table describes the
interfaces from the viewpoint of OSPFv3.

ospfv3IfEntry row .1.3.6.1.2.1.191.1.7.1

The OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3.

The information in this table is persistent,
and when written, the entity SHOULD save the
change to non-volatile storage.

Indexes

ospfv3IfIndex ospfv3IfInstId

Column	Syntax	OID
ospfv3IfIndex The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.191.1.7.1.1
ospfv3IfInstId Enables multiple interface instances of OSPFv3 to be run over a single link. Each interface instance would be assigned a separate ID. This ID has local link significance only.	Ospfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.7.1.2
ospfv3IfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.	Ospfv3AreaIdTCr/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.7.1.3
ospfv3IfType The OSPFv3 interface type.	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint	.1.3.6.1.2.1.191.1.7.1.4
ospfv3IfAdminStatus The OSPFv3 interface's administrative status. The value formed on the interface; the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.2.1.191.1.7.1.5
ospfv3IfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the router is not eligible to become the Designated Router on t…	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.7.1.6
ospfv3IfTransitDelay The estimated number of seconds it takes to transmit a Link State Update packet over this interface. LSAs contained in the update packet must have their age incremented by this amount before transmission. This value s…	secondsOspfv3UpToRefreshIntervalTCr/w Type Constraints: range: 1..1800	.1.3.6.1.2.1.191.1.7.1.7
ospfv3IfRetransInterval The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State Request…	secondsOspfv3UpToRefreshIntervalTCr/w Type Constraints: range: 1..1800	.1.3.6.1.2.1.191.1.7.1.8
ospfv3IfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.2.1.191.1.7.1.9
ospfv3IfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for a…	secondsOspfv3DeadIntervalRangeTCr/w Type Constraints: range: 1..65535	.1.3.6.1.2.1.191.1.7.1.10
ospfv3IfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive, non-broadcast multi-access neighbor.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.7.1.11
ospfv3IfState The OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface may be in Down state if the underlying IPv6 interface is dow…	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter 8 standby	.1.3.6.1.2.1.191.1.7.1.12
ospfv3IfDesignatedRouter The Router ID of the Designated Router.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.7.1.13
ospfv3IfBackupDesignatedRouter The Router ID of the Backup Designated Router.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.7.1.14
ospfv3IfEvents The number of times this OSPFv3 interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.7.1.15
ospfv3IfRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.191.1.7.1.16
ospfv3IfDemand Indicates whether Demand OSPFv3 procedures (Hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.7.1.17
ospfv3IfMetricValue The metric assigned to this interface. The default value of the metric is 'Reference Bandwidth / ifSpeed'. The value of the reference bandwidth can be set in the ospfv3ReferenceBandwidth object.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.191.1.7.1.18
ospfv3IfLinkScopeLsaCount The total number of Link-scope link state advertisements in this link's link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.7.1.19
ospfv3IfLinkLsaCksumSum The 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determine if there has been a change in a router's link state datab…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.7.1.20
ospfv3IfDemandNbrProbe Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.7.1.21
ospfv3IfDemandNbrProbeRetransLimit The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.7.1.22
ospfv3IfDemandNbrProbeInterval Defines how often the neighbor will be probed.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.7.1.23
ospfv3IfTEDisabled Indicates whether or not traffic engineering is disabled on the interface when traffic engineering is enabled in the area where the interface is attached. The object is set to the value true (1) to disable traffic engi…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.7.1.24
ospfv3IfLinkLSASuppression Specifies whether or not link LSA origination is suppressed for broadcast or NBMA interface types. The object is set to value true (1) to suppress the origination.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.7.1.25

Information about this router's virtual
interfaces that the OSPFv3 Process is configured
to carry on.

ospfv3VirtIfEntry row .1.3.6.1.2.1.191.1.8.1

Information about a single virtual interface.

The information in this table is persistent,
and when written, the entity SHOULD save the
change to non-volatile storage.

Indexes

ospfv3VirtIfAreaId ospfv3VirtIfNeighbor

Column	Syntax	OID
ospfv3VirtIfAreaId The transit area that the virtual link traverses. By definition, this is not Area 0.	Ospfv3AreaIdTC Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.8.1.1
ospfv3VirtIfNeighbor The Router ID of the virtual neighbor.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.8.1.2
ospfv3VirtIfIndex The local interface index assigned by the OSPFv3 Process to this OSPFv3 virtual interface. It is advertised in Hellos sent over the virtual link and in the router's router-LSAs.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.191.1.8.1.3
ospfv3VirtIfInstId The local Interface Instance ID assigned by the OSPFv3 Process to this OSPFv3 virtual interface.	Ospfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.8.1.4
ospfv3VirtIfTransitDelay The estimated number of seconds it takes to transmit a Link State Update packet over this interface.	secondsOspfv3UpToRefreshIntervalTCr/w Type Constraints: range: 1..1800	.1.3.6.1.2.1.191.1.8.1.5
ospfv3VirtIfRetransInterval The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State Request packets. This…	secondsOspfv3UpToRefreshIntervalTCr/w Type Constraints: range: 1..1800	.1.3.6.1.2.1.191.1.8.1.6
ospfv3VirtIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.2.1.191.1.8.1.7
ospfv3VirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neig…	secondsOspfv3DeadIntervalRangeTCr/w Type Constraints: range: 1..65535	.1.3.6.1.2.1.191.1.8.1.8
ospfv3VirtIfState OSPF virtual interface states. The same encoding as the ospfV3IfTable is used.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.2.1.191.1.8.1.9
ospfv3VirtIfEvents The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.8.1.10
ospfv3VirtIfRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.191.1.8.1.11
ospfv3VirtIfLinkScopeLsaCount The total number of Link-scope link state advertisements in this virtual link's link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.8.1.12
ospfv3VirtIfLinkLsaCksumSum The 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this virtual link's link state database. The sum can be used to determine if there has been a change in a router's link sta…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.8.1.13

A table describing all neighbors in the
locality of the OSPFv3 router.

ospfv3NbrEntry row .1.3.6.1.2.1.191.1.9.1

The information regarding a single neighbor.

Indexes

ospfv3NbrIfIndex ospfv3NbrIfInstId ospfv3NbrRtrId

Column	Syntax	OID
ospfv3NbrIfIndex The Local Link ID of the link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.191.1.9.1.1
ospfv3NbrIfInstId Interface instance over which the neighbor can be reached. This ID has local link significance only.	Ospfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.9.1.2
ospfv3NbrRtrId A 32-bit unsigned integer uniquely identifying the neighboring router in the Autonomous System.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.9.1.3
ospfv3NbrAddressType The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.191.1.9.1.4
ospfv3NbrAddress The IPv6 address of the neighbor associated with the local link.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.9.1.5
ospfv3NbrOptions A bit mask corresponding to the neighbor's options field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.191.1.9.1.6
ospfv3NbrPriority The priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Router on this particular network.	OSPF-MIBDesignatedRouterPriority Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.9.1.7
ospfv3NbrState The state of the relationship with this neighbor.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.2.1.191.1.9.1.8
ospfv3NbrEvents The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.9.1.9
ospfv3NbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.9.1.10
ospfv3NbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.9.1.11
ospfv3NbrIfId The Interface ID that the neighbor advertises in its Hello packets on this link, that is, the neighbor's local interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.191.1.9.1.12
ospfv3NbrRestartHelperStatus Indicates whether the router is acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.2.1.191.1.9.1.13
ospfv3NbrRestartHelperAge Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsOspfv3UpToRefreshIntervalTC Type Constraints: range: 1..1800	.1.3.6.1.2.1.191.1.9.1.14
ospfv3NbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a restart attempt is currently under…	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.2.1.191.1.9.1.15

A table describing all configured neighbors.
          
The Configured Neighbors table just gives
OSPFv3 information for sending OSPFv3 packets
to potential neighbors and is typically used
on NBMA and Point-to-Multipoint networks.
Once a Hello is received from a neighbor in
the Configured Neighbor table, an entry for
that neighbor is created in the Neighbor table
and adjacency state is maintained there.
Neighbors on multi-access or Point-to-Point
networks can use multicast addressing, so only
Neighbor table entries are created for them.

ospfv3CfgNbrEntry row .1.3.6.1.2.1.191.1.10.1

The information regarding a single configured
neighbor.

The information in this table is persistent,
and when written, the entity SHOULD save the
change to non-volatile storage.

Indexes

ospfv3CfgNbrIfIndex ospfv3CfgNbrIfInstId ospfv3CfgNbrAddressType ospfv3CfgNbrAddress

Column	Syntax	OID
ospfv3CfgNbrIfIndex The Local Link ID of the link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.191.1.10.1.1
ospfv3CfgNbrIfInstId Interface instance over which the neighbor can be reached. This ID has local link significance only.	Ospfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.10.1.2
ospfv3CfgNbrAddressType The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.191.1.10.1.3
ospfv3CfgNbrAddress The IPv6 address of the neighbor associated with the local link.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.10.1.4
ospfv3CfgNbrPriority The priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Router on this particular network.	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.10.1.5
ospfv3CfgNbrRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.191.1.10.1.6

A table describing all virtual neighbors.

ospfv3VirtNbrEntry row .1.3.6.1.2.1.191.1.11.1

Virtual neighbor information.

Indexes

ospfv3VirtNbrArea ospfv3VirtNbrRtrId

Column	Syntax	OID
ospfv3VirtNbrArea The transit area Identifier.	Ospfv3AreaIdTC Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.11.1.1
ospfv3VirtNbrRtrId A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.11.1.2
ospfv3VirtNbrIfIndex The local Interface ID for the virtual link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.191.1.11.1.3
ospfv3VirtNbrIfInstId The interface instance for the virtual link over which the neighbor can be reached.	Ospfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.11.1.4
ospfv3VirtNbrAddressType The address type of ospfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.191.1.11.1.5
ospfv3VirtNbrAddress The IPv6 address advertised by this virtual neighbor. It must be a global scope address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.191.1.11.1.6
ospfv3VirtNbrOptions A bit mask corresponding to the neighbor's options field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.191.1.11.1.7
ospfv3VirtNbrState The state of the virtual neighbor relationship.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.2.1.191.1.11.1.8
ospfv3VirtNbrEvents The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other time…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.11.1.9
ospfv3VirtNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.11.1.10
ospfv3VirtNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.11.1.11
ospfv3VirtNbrIfId The Interface ID that the neighbor advertises in its Hello packets on this virtual link, that is, the neighbor's local Interface ID.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.191.1.11.1.12
ospfv3VirtNbrRestartHelperStatus Indicates whether the router is acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.2.1.191.1.11.1.13
ospfv3VirtNbrRestartHelperAge Remaining time in the current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsOspfv3UpToRefreshIntervalTC Type Constraints: range: 1..1800	.1.3.6.1.2.1.191.1.11.1.14
ospfv3VirtNbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a restart attempt is currently under…	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.2.1.191.1.11.1.15

The Area Aggregate Table acts as an adjunct
to the Area Table.  It describes those address
aggregates that are configured to be propagated
from an area.  Its purpose is to reduce the amount
of information that is known beyond an area's
borders.
          
A range of IPv6 prefixes specified by a
prefix / prefix length pair.  Note that if
ranges are configured such that one range
subsumes another range, the most specific
match is the preferred one.

ospfv3AreaAggregateEntry row .1.3.6.1.2.1.191.1.12.1

A single area aggregate entry.

Information in this table is persistent, and
when this object is written, the entity SHOULD
save the change to non-volatile storage.

Indexes

ospfv3AreaAggregateAreaID ospfv3AreaAggregateAreaLsdbType ospfv3AreaAggregatePrefixType ospfv3AreaAggregatePrefix ospfv3AreaAggregatePrefixLength

Column	Syntax	OID
ospfv3AreaAggregateAreaID The area the Address Aggregate is to be found within.	Ospfv3AreaIdTC Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.12.1.1
ospfv3AreaAggregateAreaLsdbType The type of the Address Aggregate. This field specifies the Area LSDB type that this Address Aggregate applies to.	Enumeration Enumerated Values: 8195 interAreaPrefixLsa 8199 nssaExternalLsa	.1.3.6.1.2.1.191.1.12.1.2
ospfv3AreaAggregatePrefixType The prefix type of ospfv3AreaAggregatePrefix. Only IPv6 addresses are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.191.1.12.1.3
ospfv3AreaAggregatePrefix The IPv6 prefix.	OctetString Constraints: range: 0-16	.1.3.6.1.2.1.191.1.12.1.4
ospfv3AreaAggregatePrefixLength The length of the prefix (in bits). A prefix can not be shorter than 3 bits.	bitsUnsigned32 Constraints: range: 3-128	.1.3.6.1.2.1.191.1.12.1.5
ospfv3AreaAggregateRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.191.1.12.1.6
ospfv3AreaAggregateEffect Prefixes subsumed by ranges will either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the prefix not being advertised at all outside the area.	Enumerationr/w Enumerated Values: 1 advertiseMatching 2 doNotAdvertiseMatching	.1.3.6.1.2.1.191.1.12.1.7
ospfv3AreaAggregateRouteTag This tag is advertised only in the summarized As-External LSA when summarizing from NSSA-LSAs to AS-External-LSAs.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.12.1.8

The OSPFv3 Process's Link-scope LSDB for virtual
interfaces.  The LSDB contains the Link-scope link
state advertisements from virtual interfaces.

ospfv3VirtLinkLsdbEntry row .1.3.6.1.2.1.191.1.13.1

A single Link-scope link state advertisement
for a virtual interface.

Indexes

ospfv3VirtLinkLsdbIfAreaId ospfv3VirtLinkLsdbIfNeighbor ospfv3VirtLinkLsdbType ospfv3VirtLinkLsdbRouterId ospfv3VirtLinkLsdbLsid

Column	Syntax	OID
ospfv3VirtLinkLsdbIfAreaId The transit area that the virtual link traverses. By definition, this is not Area 0.	Ospfv3AreaIdTC Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.191.1.13.1.1
ospfv3VirtLinkLsdbIfNeighbor The Router ID of the virtual neighbor.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.13.1.2
ospfv3VirtLinkLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored in this database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.191.1.13.1.3
ospfv3VirtLinkLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	Ospfv3RouterIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.13.1.4
ospfv3VirtLinkLsdbLsid The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressin…	Ospfv3LsIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.191.1.13.1.5
ospfv3VirtLinkLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more rece…	Ospfv3LsaSequenceTC	.1.3.6.1.2.1.191.1.13.1.6
ospfv3VirtLinkLsdbAge This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.	secondsOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.2.1.191.1.13.1.7
ospfv3VirtLinkLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.191.1.13.1.8
ospfv3VirtLinkLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.2.1.191.1.13.1.9
ospfv3VirtLinkLsdbTypeKnown The value true (1) indicates that the LSA type is recognized by this router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.191.1.13.1.10