OS-PROV-RFC2544-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
8
Rows
8
Columns
182
.1.3.6.1.4.1.6926.2.11.4 · 1 row entry · 26 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osProvRfc2544PrflTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-PROV-RFC2544-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-PROV-RFC2544-MIB::osProvRfc2544PrflTable'
This table contains RFC2544 Profiles.
osProvRfc2544PrflEntry row .1.3.6.1.4.1.6926.2.11.4.1
Contains an entry of the table.
Column Syntax OID
.
OS-COMMON-TC-MIBEntityName
Type Constraints:
range: 1..30
.1.3.6.1.4.1.6926.2.11.4.1.2
.
TestTyper/w
Type Values:
1unknown
2throughput
3latency
4frameLossRate
5basic
.1.3.6.1.4.1.6926.2.11.4.1.4
Protocol of a test.
TestProtocolr/w
Type Values:
1unknown
2l2Protocol
5l3Protocol
.1.3.6.1.4.1.6926.2.11.4.1.5
Number of bursts. The value 0 means forever.
burstsUnsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6926.2.11.4.1.16
Time interval between bursts, in seconds.
secondsUnsigned32r/w
Constraints:
range: 1-86400
.1.3.6.1.4.1.6926.2.11.4.1.17
Number of packets (probes) in a burst. If osProvRfc2544Duration is not equal to 0,
this object does not make sense and is not used.
Objects osProvRfc2544ProbeNumber and osProvRfc2544Duration DO NOT NECESSARILY CORRESPON…
messagesUnsigned32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.6926.2.11.4.1.21
Duration of one burst. The value 0 means, that osProvRfc2544ProbeNumber will be used.
Objects osProvRfc2544ProbeNumber and osProvRfc2544Duration DO NOT NECESSARILY CORRESPOND
TO EACH OTHER on GET operation.
GET operati…
secondsUnsigned32r/w
Constraints:
range: 0-3600
.1.3.6.1.4.1.6926.2.11.4.1.22
The interval between transmitted frames in a burst.
This object is not used if osProvRfc2544Rate is not equal to 0.
Objects osProvRfc2544ProbeInterval and osProvRfc2544Rate DO NOT NECESSARILY CORRESPOND
TO EACH OTHER o…
microsecondsUnsigned32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.6926.2.11.4.1.24
The rate of transmition frames in bursts. The value 0 means, that osProvRfc2544ProbeInterval will be used.
Objects osProvRfc2544ProbeInterval and osProvRfc2544Rate DO NOT NECESSARILY CORRESPOND
TO EACH OTHER on GET ope…
Kbits/secSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.4.1.25
Specifies the duration to wait for a responce (milliseconds).
millisecondsUnsigned32r/w
Constraints:
range: 1-60000
.1.3.6.1.4.1.6926.2.11.4.1.26
Maximum loss ratio allowed in the throughput test.
0.01%Unsigned32r/w
Constraints:
range: 0-10000
.1.3.6.1.4.1.6926.2.11.4.1.28
Minimum rate step in the throughput test.
Kbits/secUnsigned32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.6926.2.11.4.1.29
Packet length, including VLAN ID and CRC.
For throughput(2) and latency(3) returns first value from osProvRfc2544LengthValue as a reply on GET operation
and rejects SET operation.
octetsUnsigned32r/w
Constraints:
range: 64-9216
.1.3.6.1.4.1.6926.2.11.4.1.32
Determine how to fill the data portion of a probe
packet, while number of characters is a multiple of 8.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6926.2.11.4.1.35
Time To Live.
Unsigned32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.6926.2.11.4.1.37
The maximum number of entries allowed in the
osProvRfc2544HistTable. An implementation of this
MIB will remove the oldest entry in the
osProvRfc2544HistTable to allow the addition of an
new entry once the number of row…
rowsUnsigned32r/w
Constraints:
range: 2-65535
.1.3.6.1.4.1.6926.2.11.4.1.50
The value of this object determines when and if
to generate a notification for this entry:
burstComplete(0)- Generate a osProvRfc2544BurstComplete notification.
burstFail(1) - Generate a osProvRfc2544BurstFail notifi…
Bitsr/w
Enumerated Values:
0burstComplete
1burstFail
2testComplete
3rtt
4jitter
5pcktLoss
.1.3.6.1.4.1.6926.2.11.4.1.55
Frame delay (Average of Round Trip Time) Rising threshold.
Value 0 means, that this the agent will not check this type of threshold.
microsecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.4.1.60
Frame delay (Average of Round Trip Time) Falling threshold
microsecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.4.1.61
Jitter Rising threshold.
Value 0 means, that this the agent will not check this type of threshold.
microsecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.4.1.62
Jitter Falling threshold.
microsecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.4.1.63
The packet loss Rising threshold.
0.01%SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.4.1.64
The packet loss Falling threshold.
0.01%SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.4.1.65
.
OctetString
Constraints:
range: 0-160
.1.3.6.1.4.1.6926.2.11.4.1.97
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
.1.3.6.1.4.1.6926.2.11.4.1.98
.
OS-COMMON-TC-MIBProfileStatus
Type Values:
1unknown
5busy
6free
9underProcessing
.1.3.6.1.4.1.6926.2.11.4.1.99
.1.3.6.1.4.1.6926.2.11.5 · 1 row entry · 2 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osProvRfc2544LngthsSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-PROV-RFC2544-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-PROV-RFC2544-MIB::osProvRfc2544LngthsSetTable'
This table contains RFC2544 Profiles.
osProvRfc2544LngthsSetEntry row .1.3.6.1.4.1.6926.2.11.5.1
Contains an entry of the table.
Column Syntax OID
Packet length including VLAN-id and CRC.
octetsUnsigned32
Constraints:
range: 64-9216
.1.3.6.1.4.1.6926.2.11.5.1.4
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
.1.3.6.1.4.1.6926.2.11.5.1.98
.1.3.6.1.4.1.6926.2.11.7 · 1 row entry · 11 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osProvRfc2544CfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-PROV-RFC2544-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-PROV-RFC2544-MIB::osProvRfc2544CfgTable'
Rfc2544 service configuration table.
osProvRfc2544CfgEntry row .1.3.6.1.4.1.6926.2.11.7.1
Contains an entry of the table.
Column Syntax OID
The value 0 means, that this entry corresponds to the service, not to to any flow.
If this object is not equal to 0, it means CoS of a flow.
OS-COMMON-TC-MIBServFlowId
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.7.1.3
Refers to an entry in osProvRfc2544PrflTable. If osProvRfc2544CfgPrfl
is empty, then default values are used.
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
.1.3.6.1.4.1.6926.2.11.7.1.4
If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then osProvRfc2544DstMac must be defined
with a host physical address to be used as a remote host for performing an operation.

If osProvRfc2544PrflP…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.7.1.6
If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then osProvRfc2544CfgSrcMac must be defined.
If configured, override osProvRfc2544CfgSrcMacRange value.

If osProvRfc2544PrflProtocol is equal to l3P…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.7.1.7
Defines customer source-mac range, i.e. multi source-mac addresses based on machine source-mac
changing the thrid byte corresponding to the configured range.
This parameter overwrite osProvRfc2544CfgSrcMac parameter. I…
OS-COMMON-TC-MIBPortListr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6926.2.11.7.1.8
Specifies the type of host address to be used at a remote
host for performing an operation.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6926.2.11.7.1.10
If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then he test cannot be enabled if osProvRfc2544DstIpAddr
is not equal to 0.0.0.0.

If osProvRfc2544PrflProtocol is equal to l3Protocol(5), then osPro…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6926.2.11.7.1.11
If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then osProvRfc2544TxPort may be defined
and used when osProvRfc2544CfgDstMac is absent in learning table (FDB) to determine the port,
from wich the requests are to…
OS-COMMON-TC-MIBPortIndexOrNoner/w
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6926.2.11.7.1.14
Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the ping probe. The DS Field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as the Traffic …
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.6926.2.11.7.1.15
To start/stop Performance test.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6926.2.11.7.1.20
This object when written clears the osProvRfc2544HistTable history tables
- all rows are deleted. When read the value always returns 'false'.
Writing this object at row creation is irrelevant and should not
be done.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6926.2.11.7.1.21
.1.3.6.1.4.1.6926.2.11.10 · 1 row entry · 28 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osProvRfc2544RsltTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-PROV-RFC2544-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-PROV-RFC2544-MIB::osProvRfc2544RsltTable'
This table contain the last completed burst results. Exception is the object osProvRfc2544RsltTestRunState - it
indicates a current state of the test.
osProvRfc2544RsltEntry row .1.3.6.1.4.1.6926.2.11.10.1
Contains an entry of the osProvRfc2544RsltTable table.
Indexes
No indexes recorded
Column Syntax OID
Timestamp, when this test has been started.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6926.2.11.10.1.4
.
TestType
Type Values:
1unknown
2throughput
3latency
4frameLossRate
5basic
.1.3.6.1.4.1.6926.2.11.10.1.5
.
OS-COMMON-TC-MIBRespType
Type Values:
0unknown
1regular
2generic
.1.3.6.1.4.1.6926.2.11.10.1.6
.
TestRunState
Type Values:
1notRunning
2running
3waitInQueue
4readyForRun
5idle
.1.3.6.1.4.1.6926.2.11.10.1.7
Protocol of a test.
TestProtocol
Type Values:
1unknown
2l2Protocol
5l3Protocol
.1.3.6.1.4.1.6926.2.11.10.1.8
For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.10.1.10
For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.10.1.11
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6926.2.11.10.1.12
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6926.2.11.10.1.13
.
OS-COMMON-TC-MIBPortIndexOrNone
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6926.2.11.10.1.16
Number of request packets transmitted the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.21
Number of reply packets received in the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.22
The minimum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.23
The maximum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.24
The average round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.25
This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.26
The minimum value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.30
The mahimum value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.32
The average value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.33
This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.34
The minimum value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.35
The mahimum value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.36
The average value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.37
This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.38
The calculation of packet loss value.
0.01%SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.40
The interval between packets.
Objects osProvRfc2544RsltProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns osProvRfc2…
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.46
The rate of transmition frames in bursts.
Objects osProvRfc2544RsltProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, then
agent re…
Kbits/secSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.47
This object is equal to corresponding osProvRfc2544PacketLength.
octetsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.10.1.48
.1.3.6.1.4.1.6926.2.11.11 · 1 row entry · 28 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osProvRfc2544HistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-PROV-RFC2544-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-PROV-RFC2544-MIB::osProvRfc2544HistTable'
This table contain at most last osProvRfc2544MaxRows samples, each of them reflects results of 
comleted burst.
osProvRfc2544HistEntry row .1.3.6.1.4.1.6926.2.11.11.1
Contains an entry of the osProvRfc2544HistTable table.
Column Syntax OID
An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same osProvRfc2544CfgEntry.
This index starts at 1 and increases by one
as each new sample is taken.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.3
Timestamp, when this test has been started.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6926.2.11.11.1.4
.
TestType
Type Values:
1unknown
2throughput
3latency
4frameLossRate
5basic
.1.3.6.1.4.1.6926.2.11.11.1.5
.
OS-COMMON-TC-MIBRespType
Type Values:
0unknown
1regular
2generic
.1.3.6.1.4.1.6926.2.11.11.1.6
Protocol of a test.
TestProtocol
Type Values:
1unknown
2l2Protocol
5l3Protocol
.1.3.6.1.4.1.6926.2.11.11.1.8
For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.11.1.10
For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.11.1.11
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6926.2.11.11.1.12
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6926.2.11.11.1.13
.
OS-COMMON-TC-MIBPortIndexOrNone
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6926.2.11.11.1.16
Number of request packets transmitted the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.21
Number of reply packets received in the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.22
The minimum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.23
The maximum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.24
The average round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.25
This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.26
The minimum value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.30
The mahimum value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.32
The average value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.33
This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.34
The minimum value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.35
The mahimum value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.36
The average value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.37
This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.38
The calculation of packet loss value.
0.01%SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.40
The interval between packets.
Objects osProvRfc2544HistProbeInterval and osProvRfc2544HistRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns osProvRfc2…
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.46
The rate of transmition frames in bursts.
Objects osProvRfc2544HistProbeInterval and osProvRfc2544HistRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, then
agent re…
Kbits/secSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.47
This object is equal to corresponding osProvRfc2544PacketLength.
octetsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.11.1.48
.1.3.6.1.4.1.6926.2.11.12 · 1 row entry · 27 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osProvRfc2544LengthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-PROV-RFC2544-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-PROV-RFC2544-MIB::osProvRfc2544LengthTable'
Rfc2544 service configuration table.
osProvRfc2544LengthEntry row .1.3.6.1.4.1.6926.2.11.12.1
Contains an entry of the table.
Column Syntax OID
.
octetsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.3
Timestamp, when this test has been started.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6926.2.11.12.1.4
.
TestType
Type Values:
1unknown
2throughput
3latency
4frameLossRate
5basic
.1.3.6.1.4.1.6926.2.11.12.1.5
.
TestRunState
Type Values:
1notRunning
2running
3waitInQueue
4readyForRun
5idle
.1.3.6.1.4.1.6926.2.11.12.1.7
Protocol of a test.
TestProtocol
Type Values:
1unknown
2l2Protocol
5l3Protocol
.1.3.6.1.4.1.6926.2.11.12.1.8
For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.12.1.10
For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.12.1.11
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6926.2.11.12.1.12
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6926.2.11.12.1.13
.
OS-COMMON-TC-MIBPortIndexOrNone
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6926.2.11.12.1.16
Number of request packets transmitted the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.21
Number of reply packets received in the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.22
The minimum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.23
The maximum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.24
The average round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.25
This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.26
The minimum value of all source-to-destinameion jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.30
The mahimum value of all source-to-destinameion jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.32
The average value of all source-to-destinameion jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.33
This object contains the sum of the squares for all source-to-destinameion
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.34
The minimum value of all destinameion-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.35
The mahimum value of all destinameion-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.36
The average value of all destinameion-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.37
This object contains the sum of the squares for all destinameion-to-source
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.38
The calculation of packet loss value.
0.01%SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.40
The interval between packets.
Objects osProvRfc2544LengthProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns osProvRf…
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.46
The rate of transmition frames in bursts.
Objects osProvRfc2544RsltProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, then
agent re…
Kbits/secSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.12.1.47
.1.3.6.1.4.1.6926.2.11.13 · 1 row entry · 30 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osProvRfc2544RsltAccumTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-PROV-RFC2544-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-PROV-RFC2544-MIB::osProvRfc2544RsltAccumTable'
This table contain the last completed session accumulated bursts results.
osProvRfc2544RsltAccumEntry row .1.3.6.1.4.1.6926.2.11.13.1
Contains an entry of the osProvRfc2544RsltAccumTable table.
Indexes
No indexes recorded
Column Syntax OID
Timestamp, when this test has been started.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6926.2.11.13.1.4
Corresponding osRfc2544HistoryIndex.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.5
Corresponding osRfc2544HistoryIndex.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.6
.
TestType
Type Values:
1unknown
2throughput
3latency
4frameLossRate
5basic
.1.3.6.1.4.1.6926.2.11.13.1.7
.
OS-COMMON-TC-MIBRespType
Type Values:
0unknown
1regular
2generic
.1.3.6.1.4.1.6926.2.11.13.1.8
.
TestRunState
Type Values:
1notRunning
2running
3waitInQueue
4readyForRun
5idle
.1.3.6.1.4.1.6926.2.11.13.1.9
Protocol of a test.
TestProtocol
Type Values:
1unknown
2l2Protocol
5l3Protocol
.1.3.6.1.4.1.6926.2.11.13.1.10
For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.13.1.11
For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.13.1.12
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6926.2.11.13.1.13
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6926.2.11.13.1.14
.
OS-COMMON-TC-MIBPortIndexOrNone
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6926.2.11.13.1.16
Number of request packets transmitted the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.21
Number of reply packets received in the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.22
The minimum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.23
The maximum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.24
The average round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.25
This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.26
The minimum value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.30
The mahimum value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.32
The average value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.33
This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.34
The minimum value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.35
The mahimum value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.36
The average value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.37
This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.38
The calculation of packet loss value.
0.01%SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.40
The interval between packets.
Objects osProvRfc2544RsltAccumProbeInterval and osProvRfc2544RsltAccumRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns …
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.46
The rate of transmition frames in bursts.
Objects osProvRfc2544RsltAccumProbeInterval and osProvRfc2544RsltAccumRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, the…
Kbits/secSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.47
This object is equal to corresponding osProvRfc2544PacketLength.
octetsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.13.1.48
.1.3.6.1.4.1.6926.2.11.14 · 1 row entry · 30 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osProvRfc2544HistAccumTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-PROV-RFC2544-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-PROV-RFC2544-MIB::osProvRfc2544HistAccumTable'
This table contain at most last osProvRfc2544MaxRows samples, each of them reflects results of 
comleted burst.
osProvRfc2544HistAccumEntry row .1.3.6.1.4.1.6926.2.11.14.1
Contains an entry of the osProvRfc2544HistAccumTable table.
Column Syntax OID
An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same osProvRfc2544CfgEntry.
This index starts at 1 and increases by one
as each new sample is taken.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.3
Timestamp, when this test has been started.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6926.2.11.14.1.4
Corresponding osRfc2544HistoryIndex.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.5
Corresponding osRfc2544HistoryIndex.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.6
.
TestType
Type Values:
1unknown
2throughput
3latency
4frameLossRate
5basic
.1.3.6.1.4.1.6926.2.11.14.1.7
.
OS-COMMON-TC-MIBRespType
Type Values:
0unknown
1regular
2generic
.1.3.6.1.4.1.6926.2.11.14.1.8
Protocol of a test.
TestProtocol
Type Values:
1unknown
2l2Protocol
5l3Protocol
.1.3.6.1.4.1.6926.2.11.14.1.9
For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.14.1.10
For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6926.2.11.14.1.11
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6926.2.11.14.1.12
For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6926.2.11.14.1.13
.
OS-COMMON-TC-MIBPortIndexOrNone
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6926.2.11.14.1.16
Number of request packets transmitted the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.21
Number of reply packets received in the burst.
messagesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.22
The minimum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.23
The maximum round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.24
The average round-trip-time (RTT) received.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.25
This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.26
The minimum value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.30
The mahimum value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.32
The average value of all source-to-destination jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.33
This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.34
The minimum value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.35
The mahimum value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.36
The average value of all destination-to-source jitter values.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.37
This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation.
square of microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.38
The calculation of packet loss value.
0.01%SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.40
The interval between packets.
Objects osProvRfc2544HistAccumProbeInterval and osProvRfc2544HistAccumRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns …
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.46
The rate of transmition frames in bursts.
Objects osProvRfc2544HistAccumProbeInterval and osProvRfc2544HistAccumRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, the…
Kbits/secSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.47
This object is equal to corresponding osProvRfc2544PacketLength.
octetsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6926.2.11.14.1.48