OPTIX-PW-OAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
15

optixPWOamTable

table
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPWOamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-OAM-MIB::optixPWOamTable' 
Thistable is used to configure PW OAM attributes, including the PW OAM enable status, detection mode, CC detection mode, and SD/SF thresholds.
optixPWOamEntry row .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1
Thisentry is used to manage PW OAM attributes.
Indexes
Column Syntax OID
optixPWOamIndex
This object indicates the PW OAM index, ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.1
optixPWOamEnable
This object indicates whether the OAM is enabled. 1: enable 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.2
optixPWOamCheckWay
This object indicates the OAM detection mode. 1: auto 2: manual
Enumerationr/w
Enumerated Values:
1auto
2manual
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.3
optixPWOamCcType
This object indicates the CC detection packet type. 1: cv (default value) 2: ffd
Enumerationr/w
Enumerated Values:
1cv
2ffd
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.4
optixPWOamCcTime
This object indicates the CC detection packet frequency. When the packet type is cv, the frequency is an invalid value, 0xff. When the packet type is ffd, the valid value of the frequency is as follows: 1: 3.3 ms 2: 10 …
Unsigned32r/w
Constraints:
range: 1-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.5
optixPWOamSf
This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.6
optixPWOamSd
This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.7
optixPWOamPeerLsrId
This object indicates the LSR ID to receive, which is the LSR ID of the valid MPLS device. 0.0.0.0: indicates that the peer IP address of the local PW is automatically obtained.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.8
optixPWOamPeerPwId
This object indicates the remote PW ID, which is a valid MPLS PW ID. 0: indicates that the ID of the local PW is automatically obtained.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.9
optixPWOamStandard
This object indicates the OAM protocol standard&amp;nbsp; 1: 1711 2: 1731
Enumerationr/w
Enumerated Values:
1y1711
2y1731
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.10

optixPWOamStateTable

table
.1.3.6.1.4.1.2011.2.25.4.50.7.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPWOamStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-OAM-MIB::optixPWOamStateTable' 
Thistable is used to query the PW OAM status.
optixPWOamStateEntry row .1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1
Thisentry is used to manage the PW OAM status.
Indexes
Column Syntax OID
optixPWOamDirection
For bidirectional MPLS PWs, the status query is performed in two directions, local and remote ends. This object indicates the direction of the PW OAM. The status query is performed in single direction: local or remote e…
Enumeration
Enumerated Values:
0farend
1nearend
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.1
optixPWOamState
This object indicates the PW OAM status. 0: initialstate, 1: nearendavailable, 2: nearenddefectavailable, 3: nearenddefectunavailable, 4: nearendunavailable, 5: farendavailable, 6: farenddefectavailable, 7: farenddefect…
Enumeration
Enumerated Values:
0initialstate
1nearendavailable
2nearenddefectavailable
3nearenddefectunavailable
4nearendunavailable
5farendavailable
6farenddefectavailable
7farenddefectunavailable
8farendunavailable
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.2
optixPWOamDefectType
This object indicates the defect type of the PW OAM. 1: dserver, 2: dpeerme, 3: dlocv, 4: dttsimismatch, 5: dttsimismerge, 6: dexcess, 7: dunknown, 255: invalid
Enumeration
Enumerated Values:
1dserver
2dpeerme
3dlocv
4dttsimismatch
5dttsimismerge
6dexcess
7dunknown
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.3
optixPWOamUnavailableTime
This object indicates the unavailable time of the PW OAM. The time ranges from 0 to 300,000 ms. 4294967295: invalid
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.4
optixPWOamDefectPosition
This object indicates the position of the PW OAM defect: a node identified by IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.5