OPTIX-PW-OAM-MIB
This module is used to configure and manage the MPLS PW OAM. The PW OAM provides complete fault detection and identification mechanism and network performance monitoringat the PW layer. Based on the OAM check result, the equipment determines whether to trigger protection switching. The PW OAM enables quick faultdetection and identificationand service protection.
- Source file
OPTIX-PW-OAM-MIB- Last revised
- Identity
optixPWOamMod- Base OID
1.3.6.1.4.1.2011.2.25.4.50.7
Imported Objects
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus |
Net-SNMP examples using the huawei MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'OPTIX-PW-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'OPTIX-PW-OAM-MIB::optixPWOamMod'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-OAM-MIB::optixPWOamMod'
Objects (21)
Showing 21 of 21 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.2011.2.25.4.50.7 |
||
.1.3.6.1.4.1.2011.2.25.4.50.7.1 |
||
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1 |
||
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1 |
||
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.10 |
|
|
optixPWOamEnable
r/w
|
Enumeration
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.2 |
|
Enumeration
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.3 |
|
|
optixPWOamCcType
r/w
|
Enumeration
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.4 |
|
optixPWOamCcTime
r/w
|
Unsigned32
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.5 |
|
optixPWOamSf
r/w
|
Unsigned32
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.6 |
|
optixPWOamSd
r/w
|
Unsigned32
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.7 |
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.8 |
||
.1.3.6.1.4.1.2011.2.25.4.50.7.1.1.1.9 |
||
.1.3.6.1.4.1.2011.2.25.4.50.7.1.2 |
||
.1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.3 |
|
.1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.4 |
||
.1.3.6.1.4.1.2011.2.25.4.50.7.1.2.1.5 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- OPTIX-OID-MIBhuawei
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- OPTIX-PW-OAM-MIBhuaweiselected