OPTIX-PKT-IPPING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
27

optixPKTIPPingTable

table
.1.3.6.1.4.1.2011.2.25.4.50.53.1.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPKTIPPingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-IPPING-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-IPPING-MIB::optixPKTIPPingTable' 
This table describes the basic IPPing port information configurations.
optixPKTIPPingEntry row .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1
This entry describes the basic IPPing port information configurations.
Indexes
Column Syntax OID
optixPKTIPPingenable
This objectis used to reportthe enable status of the IPPing port. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.1
optixPKTIPPingPortIP
This objectis used to reportthe IP Adress of the IPPing port.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.2
optixPKTIPPingPortMask
This objectis used to reportthe IP MASK of the IPPing port.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.3
optixPKTIPPingNextopIP
This objectis used to reportthe IP Adress of the Next IPPing port.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.4
optixPKTIPPingNextopMask
This objectis used to reportthe IP MASK of the Next IPPing port.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.5
optixPKTIPPingIplistNum
This objectis used to reportthe IP List Num of the IPPing port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.6
optixPKTIPPingIplist
This objectis used to reportthe IP List of the IPPing port.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.7
optixPKTIPPingRoutelist
This objectis used to report the Static Route Num of the IP PING PORT .
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.8
optixPKTIPPingIPAddr
This objectis used to report the Static Route IP Addr List of the IP PING PORT .
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.9
optixPKTIPPingIPMac
This objectis used to report the MAC Addr List of the IP PING PORT .
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.10
optixPKTIPPingArpPort
This objectis used to report the port which learn the arp table
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.11
optixPKTIPPingArpIP
This objectis used to report the IP Addr in the arp table,have a one-to-one correspondence between report the IP Addr in the arp table and report the MAC Addr in the arp table.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.12
optixPKTIPPingArpIPMac
This objectis used to report the MAC Addr in the arp table
OctetString .1.3.6.1.4.1.2011.2.25.4.50.53.1.1.1.13

optixPKTIPPingVlanTable

table
.1.3.6.1.4.1.2011.2.25.4.50.53.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPKTIPPingVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-IPPING-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-IPPING-MIB::optixPKTIPPingVlanTable' 
This table describes the basic IPPing port VLAN information configurations.
optixPKTIPPingVlanEntry row .1.3.6.1.4.1.2011.2.25.4.50.53.1.2.1
This entry describes the basic IPPing port VLAN information configurations.
Indexes
Column Syntax OID
optixPKTIPPingProtolType
This objectis used to reportthe type of the IPPing port. 1: IPPing
Enumeration
Enumerated Values:
1ipPing
2ipPingEx
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.2.1.1
optixPKTIPPingVlanID
This objectis used to reportthe Vlan ID of the IPPING message.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.2.1.2
optixPKTIPPingVlanPrio
This objectis used to reportthe VLAN prio of the IPPing port. Value range: 0 to 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.2.1.3

optixPKTIPPingStateTable

table
.1.3.6.1.4.1.2011.2.25.4.50.53.1.6 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPKTIPPingStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-IPPING-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-IPPING-MIB::optixPKTIPPingStateTable' 
This table describes the basic information to support the start of the IP PING
optixPKTIPPingStateEntry row .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1
This entry describes the basic key information to support the start of the IP Ping
Indexes
Column Syntax OID
optixCurtPingNum
This entry describes the number of IP PING object(only support one)
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.1
optixCurtPingDstIPAddr
This entry describes the destination addr of IP ping operation
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.2
optixCurtPingPostion
This entry describes the type of IP PING, 0 means near-end IP PING,1 means far-end IP PING
Enumerationr/w
Enumerated Values:
0near
1far
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.3
optixCurtPingInBid
This entry describes the entrance-board,the value must be the oxffff if the operation is the near-end IP ping
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.4
optixCurtPingInSubid
This entry describes the entrance-subcard t,the value must be the oxff if the operation is the near-end IP ping
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.5
optixCurtPingInPid
This entry describes the entrance-port,the value must be the oxffff if the operation is the near-end IP ping
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.6
optixCurtPingTos
This entry decribes the TOS value of the ECHO-REQUEST packet,range 0~255,default 0
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.7
optixCurtPingtime
This entry decribes the timeout value,range 0~1,default 0,0 means 1sec,1 means 10sec
Enumerationr/w
Enumerated Values:
0twoSecond
1tenSecond
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.8
optixCurtPingCnt
This entry decribes the retry times of the ECHO-REQUEST packet,range 0~65535,default 3
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.9
optixCurtPingLength
This entry decribes the length of the ECHO-REQUEST packet
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.10
opitxCurtPingoptixRowStatus
This object indicates the row status of IP PING.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.53.1.6.1.255