OPTIX-L2-LAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

optixL2LagLinkAggreTable

table

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1 · 1 row entry · 22 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk optixL2LagLinkAggreTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LAG-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LAG-MIB::optixL2LagLinkAggreTable'

This table describes the L2 LAG configurations.

optixL2LagLinkAggreEntry row .1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1

This entry describes the L2 LAG configurations.

Indexes

optixL2LagLinkAggreId

Column Syntax OID

optixL2LagLinkAggreId

This object indicates the L2 LAG ID.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.1

optixL2LagLinkAggreName

This object indicates the L2 LAG name.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.2

optixL2LagLinkAggreGroupSysPri

This object indicates the system priority of the L2 LAG. Value range: 0 to 65535. The default value is 32768.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.3

optixL2LagLinkAggreGroupType

This object indicates the L2 LAG type. 0: manual, 1: static

Enumerationr/w

Enumerated Values:

0	manual
1	static

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.4

optixL2LagLinkAggreRvtMode

This object indicates the revetive mode of the L2 LAG. 0: disable, 1: enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.5

optixL2LagLinkAggreLoadType

This object indicates the load-sharing type of the L2 LAG. 0: share, 1: noShare

Enumerationr/w

Enumerated Values:

0	share
1	noShare

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.6

optixL2LagLinkAggreLoadAlg

This object indicates the load-sharingalgorithm of the L2 LAG. 0: auto, 1: srcMac, 2: dstMac, 3: srcDstMac, 4: srcIp, 5: dstIp, 6: srcDstIp, 7: srcPort, 8: dstPort, 9: srcDstPort, 10: label

Enumeration

Enumerated Values:

0	auto
1	srcMac
2	dstMac
3	srcDstMac
4	srcIp
5	dstIp
6	srcDstIp
7	srcPort
8	dstPort
9	srcDstPort
10	label

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.7

optixL2LagLinkAggreMainBid

This object indicates the master slot ID of the L2 LAG.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.8

optixL2LagLinkAggreMainSubId

This object indicates the master subboard ID of the L2 LAG.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.9

optixL2LagLinkAggreMainPid

This object indicates the master port number of the L2 LAG.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.10

optixL2LagLinkAggrMainPortPri

This object indicates the master port priority of the L2 LAG. Value range: 0 to 65535. The default value is 32768.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.11

optixL2LagLinkAggreWtrTime

This object indicates the WTR time of the L2 LAG. Value range: 0 to 30 (unit: minute). The default value is 10.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.12

optixL2LagLinkAggreSdEn

This object indicates the enable status of the LAG switching due to air interface bit errors. 0: disable, 1: enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.13

optixL2LagLinkAggrSlvPortlist

This object indicates the slave port list of the L2 LAG.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.14

optixL2LagLinkAggrWorkPortlist

This object indicates the working port list of the L2 LAG.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.15

optixL2LagLinkAggreLDProtocol

This object indicates the LD protocol of the L2 LAG. 0: null, 1: 3ah

Enumerationr/w

Enumerated Values:

0	snmpNull
1	snmp3ah

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.16

optixL2LagLinkAggrePeriod

This object indicates the master port priority of the L2 LAG. 0: long, 1: short

Enumerationr/w

Enumerated Values:

0	long
1	short

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.17

optixL2LagLinkAggreMinActLinkth

This object indicates the minimum number of active links of the L2 LAG. Value range: 1 to the total number of main and slave ports in a LAG group. The default value is 1.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.18

optixL2LagLinkAggreSlavePortNum

This parameter indicates the number of slave ports in the L2 LAG.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.19

optixL2LagLinkAggreSlavePortInfo

This object indicates the slave port info of active links of the L2 LAG.

OctetString

Constraints:
range: 0-1024

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.20

optixL2LagLinkAggreWtrTimeEx

This parameter indicates the WTR of the L2 LAG.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.21

optixL2LagLinkAggreRowStatus

This object indicates the row status of the L2 LAG.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.2011.2.25.4.50.19.1.1.1.255

optixL2LagLinkAggrePortTable

table

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2 · 1 row entry · 26 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk optixL2LagLinkAggrePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LAG-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LAG-MIB::optixL2LagLinkAggrePortTable'

This table describes the L2 LAG port configurations.

optixL2LagLinkAggrePortEntry row .1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1

This entry describes the L2 LAG port configurations.

Indexes

optixL2LagLinkAggreSlvBid optixL2LagLinkAggreSlvSbid optixL2LagLinkAggreSlvPortId

Column Syntax OID

optixL2LagLinkAggreSlvBid

This object indicates the slot ID of the L2 LAG port.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.1

optixL2LagLinkAggreSlvSbid

This object indicates the subboard ID of the L2 LAG port.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.2

optixL2LagLinkAggreSlvPortId

This object indicates the logical port number of the L2 LAG port.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.3

optixL2LagLinkAggreInfoLocalSysId

This object indicates the local system ID of the L2 LAG. System priority+MAC address

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.4

optixL2LagLinkAggreInfoLocalPid

This object indicates the logical port number of the L2 LAG localport.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.5

optixL2LagLinkAggreInfoLocalPortPri

This object indicates the priority of the L2 LAG local port. Value range: 0 to 65535. The default value is 32768.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.6

optixL2LagLinkAggreInfoLocalPortOpKey

This object indicates the operation key of the L2 LAG local port. The default value is 0.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.7

optixL2LagLinkAggreInfoLocalPortLacpFlag

This object indicates the LACP flag of the L2 LAG local port. The default value is 125. Packets are sent in a long period.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.8

optixL2LagLinkAggrInfoRemoteSysId

This object indicates the remote system ID of the L2 LAG. System priority+MAC address

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.9

optixL2LagLinkAggrInfoRemotePid

This object indicates the logical port number of the L2 LAG remote port.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.10

optixL2LagLinkAggrInfoRemotePortPri

This object indicates the priority of the L2 LAG remote port. Value range: 0 to 65535. The default value is 32768.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.11

optixL2LagLinkAggrInfoRemoteOpKey

This object indicates the operation key of the L2 LAG remote port. The default value is 0.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.12

optixL2LagLinkAggrInfoRemotePortLacpFlag

This object indicates the LACP status of the L2 LAG remote port. The default value is 125. Packets are sent in a long period.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.13

optixL2LagLinkAggreRcvPdu

This object indicates the packets received by the L2 LAG. Value range: 0 to 0xffffffff.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.14

optixL2LagLinkAggreRcvIllPdu

This object indicates the error packets received by the L2 LAG. Value range: 0 to 0xffffffff.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.15

optixL2LagLinkAggreSendPdu

This object indicates the packets transmitted by the L2 LAG. Value range: 0 to 0xffffffff.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.16

optixL2LagLinkAggreRcvMarkPdu

This object indicates the marked packets received by the L2 LAG. Value range: 0 to 0xffffffff.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.17

optixL2LagLinkAggreRcvIllMarkPdu

This object indicates the marked error packets received by the L2 LAG. Value range: 0 to 0xffffffff.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.18

optixL2LagLinkAggreSendMarkPdu

This object indicates the marked packets transmitted by the L2 LAG. Value range: 0 to 0xffffffff.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.19

optixL2LagLinkAggrePortPri

This object indicates the priority of the L2 LAG slave port. Value range: 0 to 0xffffffff.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.20

optixL2LagLinkAggrePortSelected

This object indicates the selected status of the L2 LAG port. 0: selected, 1: standby, 2: unselected

Enumeration

Enumerated Values:

0	selected
1	standby
2	unselected

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.21

optixL2LagLinkAggrePortInuse

This object indicates the used status of the L2 LAG port. 0: false, 1: true

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.22

optixL2LagLinkAggrePortRef

This object indicates the referenced status of the L2 LAG port. 0: false, 1: true

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.23

optixL2LagLinkAggreLagId

This entry describes the L2 LAG configurations. Value range: 1 to 16.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.24

optixL2LagLinkAggrePdutype

This object indicates the cleartype of packets by the L2 LAG. 1: lacpdurcv, 2: lacpdurcvill, 3: lacpdusend, 4: markerpdurcv, 5: markerpdurcvill, 6: markerrsppdusend, 7: invalid

Enumerationr/w

Enumerated Values:

0	all
1	lacpdurcv
2	lacpdurcvill
3	lacpdusend
4	markerpdurcv
5	markerpdurcvill
6	markerrsppdusend
7	invalid

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.25

optixL2LagLinkAggrePortRowStatus

This object indicates the row status of the L2 LAG logical port.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.2.25.4.50.19.1.2.1.255

optixL2LagPortFsmTable

table

.1.3.6.1.4.1.2011.2.25.4.50.19.1.3 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk optixL2LagPortFsmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LAG-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LAG-MIB::optixL2LagPortFsmTable'

This table describes the L2 LAG history state configurations.

optixL2LagPortFsmEntry row .1.3.6.1.4.1.2011.2.25.4.50.19.1.3.1

This entry describes the L2 LAG history state configurations.

Indexes

optixL2LagLinkAggreId optixL2LagLinkAggreSlvBid optixL2LagLinkAggreSlvSbid optixL2LagLinkAggreSlvPortId optixL2LagPortFsmType

Column Syntax OID

optixL2LagPortFsmType

This object indicates the type of the L2 LAG Finite State Machine. 1: rx, 2: ptx, 3: mux, 4: actor, 5: partner

Enumeration

Enumerated Values:

1	rx
2	ptx
3	mux
4	actor
5	partner

.1.3.6.1.4.1.2011.2.25.4.50.19.1.3.1.1

optixL2LagPortFsmInfoNum

This object indicates the number of the L2 LAG Finite State Machine. Value range: 1 to 10.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.19.1.3.1.2

optixL2LagPortFsmCause

This object indicates the transferential reason of the L2 LAG Finite State Machine. '&' is used to separate multiple records. For example, PORTENLACPEN & PARTNERSYNCTRUE.

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.2011.2.25.4.50.19.1.3.1.3

optixL2LagPortFsmLacpState

This object indicates the state of the L2 LAG Finite State Machine. '&' is used to separate multiple records. For example, MUXWAITING & MUXDETACHED.

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.2011.2.25.4.50.19.1.3.1.4

optixL2LagPortFsmTimeStamp

This object indicates the timestamp of the L2 LAG Finite State Machine.

OctetString

Constraints:
range: 0-512