ONS15501-MIB

        The MIB definitions for ONS-15501 Optical 
Amplifier.
    
Source file
ONS15501-MIB
Last revised
Identity
ons15501MIB
Base OID
1.3.6.1.4.1.1869.11.11
Imported Objects
ENTITY-MIB PhysicalIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI enterprises Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DateAndTime DisplayString TEXTUAL-CONVENTION (no object page) TimeStamp
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ONS15501-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ONS15501-MIB::ons15501MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ONS15501-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ONS15501-MIB::ons15501MIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (86)
.1.3.6.1.4.1.1869
.1.3.6.1.4.1.1869.11
.1.3.6.1.4.1.1869.11.11
.1.3.6.1.4.1.1869.11.11.1
.1.3.6.1.4.1.1869.11.11.1.1
.1.3.6.1.4.1.1869.11.11.1.10
.1.3.6.1.4.1.1869.11.11.1.11
.1.3.6.1.4.1.1869.11.11.1.12
.1.3.6.1.4.1.1869.11.11.1.13
.1.3.6.1.4.1.1869.11.11.1.14
.1.3.6.1.4.1.1869.11.11.1.15
.1.3.6.1.4.1.1869.11.11.1.16
.1.3.6.1.4.1.1869.11.11.1.17
.1.3.6.1.4.1.1869.11.11.1.18
.1.3.6.1.4.1.1869.11.11.1.19
.1.3.6.1.4.1.1869.11.11.1.2
.1.3.6.1.4.1.1869.11.11.1.20
.1.3.6.1.4.1.1869.11.11.1.21
.1.3.6.1.4.1.1869.11.11.1.22
.1.3.6.1.4.1.1869.11.11.1.23
.1.3.6.1.4.1.1869.11.11.1.24
.1.3.6.1.4.1.1869.11.11.1.25
.1.3.6.1.4.1.1869.11.11.1.3
.1.3.6.1.4.1.1869.11.11.1.4
Unsigned32
.1.3.6.1.4.1.1869.11.11.1.5
.1.3.6.1.4.1.1869.11.11.1.6
.1.3.6.1.4.1.1869.11.11.1.7
Unsigned32
.1.3.6.1.4.1.1869.11.11.1.8
.1.3.6.1.4.1.1869.11.11.1.9
.1.3.6.1.4.1.1869.11.11.2
.1.3.6.1.4.1.1869.11.11.2.1
dBInteger32
.1.3.6.1.4.1.1869.11.11.2.10
.1.3.6.1.4.1.1869.11.11.2.11
.1.3.6.1.4.1.1869.11.11.2.12
.1.3.6.1.4.1.1869.11.11.2.13
.1.3.6.1.4.1.1869.11.11.2.14
degrees CInteger32
.1.3.6.1.4.1.1869.11.11.2.15
degrees CInteger32
.1.3.6.1.4.1.1869.11.11.2.16
.1.3.6.1.4.1.1869.11.11.2.17
.1.3.6.1.4.1.1869.11.11.2.18
dBmInteger32
.1.3.6.1.4.1.1869.11.11.2.2
dBInteger32
.1.3.6.1.4.1.1869.11.11.2.3
.1.3.6.1.4.1.1869.11.11.2.4
.1.3.6.1.4.1.1869.11.11.2.5
dBmInteger32
.1.3.6.1.4.1.1869.11.11.2.6
dBInteger32
.1.3.6.1.4.1.1869.11.11.2.7
dBInteger32
.1.3.6.1.4.1.1869.11.11.2.8
.1.3.6.1.4.1.1869.11.11.2.9
.1.3.6.1.4.1.1869.11.11.3
Unsigned32
.1.3.6.1.4.1.1869.11.11.3.1
.1.3.6.1.4.1.1869.11.11.3.2
.1.3.6.1.4.1.1869.11.11.3.2.1
Unsigned32
.1.3.6.1.4.1.1869.11.11.3.2.1.1
.1.3.6.1.4.1.1869.11.11.3.2.1.2
.1.3.6.1.4.1.1869.11.11.3.2.1.3
.1.3.6.1.4.1.1869.11.11.3.2.1.4
.1.3.6.1.4.1.1869.11.11.3.2.1.5
.1.3.6.1.4.1.1869.11.11.3.2.1.6
.1.3.6.1.4.1.1869.11.11.3.2.1.7
.1.3.6.1.4.1.1869.11.11.3.3
.1.3.6.1.4.1.1869.11.11.3.3.1
.1.3.6.1.4.1.1869.11.11.3.3.1.1
.1.3.6.1.4.1.1869.11.11.3.3.1.2
.1.3.6.1.4.1.1869.11.11.3.3.1.3
.1.3.6.1.4.1.1869.11.11.3.3.1.4
.1.3.6.1.4.1.1869.11.11.3.3.1.5
.1.3.6.1.4.1.1869.11.11.3.4
.1.3.6.1.4.1.1869.11.11.3.4.1
.1.3.6.1.4.1.1869.11.11.3.4.1.1
.1.3.6.1.4.1.1869.11.11.3.4.1.2
.1.3.6.1.4.1.1869.11.11.3.4.1.3
.1.3.6.1.4.1.1869.11.11.4
.1.3.6.1.4.1.1869.11.11.4.0
.1.3.6.1.4.1.1869.11.11.5
.1.3.6.1.4.1.1869.11.11.5.1
.1.3.6.1.4.1.1869.11.11.5.2
.1.3.6.1.4.1.1869.11.11.5.2.1
.1.3.6.1.4.1.1869.11.11.5.2.2
.1.3.6.1.4.1.1869.11.11.5.2.3
.1.3.6.1.4.1.1869.11.11.5.2.4
.1.3.6.1.4.1.1869.11.11.5.2.5
.1.3.6.1.4.1.1869.11.11.5.2.6
.1.3.6.1.4.1.1869.11.11.5.3
.1.3.6.1.4.1.1869.11.11.6
.1.3.6.1.4.1.1869.11.11.6.1
.1.3.6.1.4.1.1869.11.11.6.2
Dependencies (7) 4 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANA-ENTITY-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMP-FRAMEWORK-MIBrfc
  6. UUID-TC-MIBrfc
  7. ENTITY-MIBrfc
  8. ONS15501-MIBciscoselected
Type Definitions (9)
Enumeration
disabled(1)
enabled(2)
Enumeration
critical(1)
major(2)
minor(3)
info(4)
noAlarm(5)
Enumeration
notInitiated(1)
inProgress(2)
failedUnknownErr(3)
failedFileNotFound(4)
failedAccessDenied(5)
failedTimedOut(6)
completedSuccessfully(7)
failedInDownload(8)
failedTimeoutInDownload(9)
failedToConnectToServer(10)
failedWhileWritingToFlash(11)
failedIllegalOperation(12)
failedFileExists(13)
failedUnknownTransferId(14)
failedUnknownUser(15)
Enumeration
disabled(1)
bothServersBad(2)
usingPrimary(3)
usingSecondary(4)
unknown(5)
Integer32 range: -500..1000
Integer32 range: -1000..0
Integer32 range: -1000..500
Enumeration
dontCare(1)
asserted(2)
cleared(3)
Enumeration
unacceptableAmbientTemperature(1)
unacceptableElectricalPower(2)
inputSignalPowerTooLow(3)
unacceptableOutputSignalPower(4)
embeddedControllerCommFailure(5)
softwareUpgradeInitiated(6)
softwareUpgradeFailed(7)
softwareUpgradeCompleted(8)
softwareRebootInitiated(9)
softwareRolledBack(10)
configurationChanged(11)
unacceptableGain(12)
laserPumpBad(13)
eEPROMBad(14)
unknown(32767)
Conformance Groups (10)
The basic group defines objects which are common to all
Embedded Linux product series of Synchronous equipment.
.1.3.6.1.4.1.1869.11.11.6.2.1
The trap attribute group provides the trap logs.
These attributes are also used in trap notifications.
.1.3.6.1.4.1.1869.11.11.6.2.2
The alarm attribute group provides the list of active
alarms
.1.3.6.1.4.1.1869.11.11.6.2.3
The trap description attribute group provides the
mapping from trap type to textual information about
the trap.
.1.3.6.1.4.1.1869.11.11.6.2.4
The ons15501 group of attributes models the parameters
in the EDFA.
.1.3.6.1.4.1.1869.11.11.6.2.5
The notification that carries all the exception
information.
.1.3.6.1.4.1.1869.11.11.6.2.6
The ons15501 group of attributes models the parameters
in the EDFA. The power supply related attributes are
not part of this group.
.1.3.6.1.4.1.1869.11.11.6.2.7
The ons15501 group of attributes models the status
of power supplies. The support for status was introduced
in version 4.0.
.1.3.6.1.4.1.1869.11.11.6.2.8
The ons15501 group of attributes provides the
voltage level of power supplies. It is available only
for DC series of ONS15501.
.1.3.6.1.4.1.1869.11.11.6.2.9
The basic group defines objects which are common to all
Embedded Linux product series of Synchronous equipment.
.1.3.6.1.4.1.1869.11.11.6.2.10
Compliance Statements (2)

OID .1.3.6.1.4.1.1869.11.11.6.1.1
The compliance statement for final release ONS15501.
Required groups

OID .1.3.6.1.4.1.1869.11.11.6.1.2
The compliance statement for 4.0 release ONS15501.
Required groups
mandatory ons15501SysInfoGroup2
mandatory ons15501CoreAttrGroup
mandatory ons15501TrapLogGroup
mandatory ons15501ActiveAlarmGroup
mandatory ons15501TrapDescriptionGroup
mandatory ons15501FinalNotificationsGroup
optional ons15501PowerSupplyStatusGroup The status of power supply is available only for
software version 4.0 and above.
optional ons15501PowerSupplyLevelGroup The level of power supply is available only for
the DC series of ONS15501.
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.1869.11.11.4.0.1
This notification is generated whenever a bitmap change is
observed on any of the monitored equipment, or when a change
has to be notified.