ONEACCESS-SYS-MIB

Monitored by Observium
        Add Cpu usage table for multicore HW
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Device identity Inventory Memory Processors
Explore Observium network monitoring
Source file
ONEACCESS-SYS-MIB
Last revised
Identity
oacSysMIBModule
Base OID
1.3.6.1.4.1.13191.1.100.671
Imported Objects
ONEACCESS-GLOBAL-REG oacExpIMSystem oacMIBModules
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the oneaccess MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ONEACCESS-SYS-MIB' -M '/opt/observium/mibs/oneaccess:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ONEACCESS-SYS-MIB::oacSysMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ONEACCESS-SYS-MIB' -M '/opt/observium/mibs/oneaccess:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ONEACCESS-SYS-MIB::oacSysMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (44)
14 directly used by Observium
.1.3.6.1.4.1.13191.1.100.671
.1.3.6.1.4.1.13191.10.3.3.1
.1.3.6.1.4.1.13191.10.3.3.1.1
.1.3.6.1.4.1.13191.10.3.3.1.1.1
.1.3.6.1.4.1.13191.10.3.3.1.1.2
.1.3.6.1.4.1.13191.10.3.3.1.1.3
.1.3.6.1.4.1.13191.10.3.3.1.1.4
.1.3.6.1.4.1.13191.10.3.3.1.100
.1.3.6.1.4.1.13191.10.3.3.1.2
oacSysCpuUsed OBS ✓
.1.3.6.1.4.1.13191.10.3.3.1.2.1
.1.3.6.1.4.1.13191.10.3.3.1.2.2
.1.3.6.1.4.1.13191.10.3.3.1.2.3
.1.3.6.1.4.1.13191.10.3.3.1.2.3.1
.1.3.6.1.4.1.13191.10.3.3.1.2.3.1.1
.1.3.6.1.4.1.13191.10.3.3.1.2.3.1.2
.1.3.6.1.4.1.13191.10.3.3.1.2.3.1.3
.1.3.6.1.4.1.13191.10.3.3.1.2.3.1.4
.1.3.6.1.4.1.13191.10.3.3.1.200
.1.3.6.1.4.1.13191.10.3.3.1.3
.1.3.6.1.4.1.13191.10.3.3.2
.1.3.6.1.4.1.13191.10.3.3.2.1
ObjectIdentifier
.1.3.6.1.4.1.13191.10.3.3.2.1.1
.1.3.6.1.4.1.13191.10.3.3.2.1.2
.1.3.6.1.4.1.13191.10.3.3.2.1.3
.1.3.6.1.4.1.13191.10.3.3.2.1.4
.1.3.6.1.4.1.13191.10.3.3.2.1.5
.1.3.6.1.4.1.13191.10.3.3.2.1.6
.1.3.6.1.4.1.13191.10.3.3.2.1.7
.1.3.6.1.4.1.13191.10.3.3.2.2
.1.3.6.1.4.1.13191.10.3.3.2.2.1
.1.3.6.1.4.1.13191.10.3.3.2.2.2
.1.3.6.1.4.1.13191.10.3.3.2.2.2.1
.1.3.6.1.4.1.13191.10.3.3.2.2.2.1.1
.1.3.6.1.4.1.13191.10.3.3.2.2.2.1.2
.1.3.6.1.4.1.13191.10.3.3.2.2.2.1.3
.1.3.6.1.4.1.13191.10.3.3.2.2.2.1.4
.1.3.6.1.4.1.13191.10.3.3.2.2.2.1.5
.1.3.6.1.4.1.13191.10.3.3.2.2.2.1.6
.1.3.6.1.4.1.13191.10.3.3.2.2.2.1.7
.1.3.6.1.4.1.13191.10.3.3.2.2.2.1.8
.1.3.6.1.4.1.13191.10.3.3.2.3
.1.3.6.1.4.1.13191.10.3.3.2.3.1
.1.3.6.1.4.1.13191.10.3.3.2.3.2
.1.3.6.1.4.1.13191.10.3.3.2.3.3
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. ONEACCESS-GLOBAL-REGoneaccess
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. ONEACCESS-SYS-MIBoneaccessselected
Type Definitions (3)
Enumeration
controlplane(0)
dataforwarding(1)
application(2)
mixed(3)
The object specify the type of Core usage
Enumeration
board(0)
cpu(1)
slot(2)
The object specify the class of OASysHwc
Enumeration
mainboard(0)
microprocessor(1)
ram(2)
flash(3)
dsp(4)
uplink(5)
module(6)
The object specify the type of OASysHwc