ONEACCESS-OAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
34

oacAtmOamVclTable

table
.1.3.6.1.4.1.13191.10.3.2.2.1.2 · 1 row entry · 15 columns
Open in standard view
Uses the oneaccess variant from /opt/observium/mibs/oneaccess.
Command help
Walk oacAtmOamVclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ONEACCESS-OAM-MIB' -M '/opt/observium/mibs/oneaccess:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ONEACCESS-OAM-MIB::oacAtmOamVclTable' 
An index into the table oacAtmOamVclTable
oacAtmOamVclEntry row .1.3.6.1.4.1.13191.10.3.2.2.1.2.1
An index into the table oacAtmOamVclTable
Indexes
No indexes recorded
Column Syntax OID
oacAtmOamVclPvcManage
Enable OAM for Pvc management
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.1
oacAtmOamVclSegmentLoopback
Enable segment loopback on this virtual channel
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.2
oacAtmOamVclEndLoopback
Enable end to end loopback on this virtual channel
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.3
oacAtmOamVclAisRdiEnable
Enable Remote Defect Indication
OAM cell generation if an Alarm
Indication Signal OAM cell is received,
or if a defect is detected on the PVC
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.4
oacAtmOamVclSegmentContinuityCheckEnable
Enable Segment Loss of Continuity
cells detect on the PVC.Enable generation of
Segment Continuity Check
cells on the PVC.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.5
oacAtmOamVclEndContinuityCheckEnable
Enable End to End Loss of Continuity
cells detect on the PVC.Enable generation of
End to End Continuity Check
cells on the PVC.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.6
oacAtmOamVclLoopbackTxInterval
Frequency of OAM loopback cell
are generated on this virtual channel
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.7
oacAtmOamVclLoopbackTxRetryFrequency
Frequency of OAM loopback cell
are generated on this virtual channel,
when a change has occured, that is to
say either no reception of the last
loopback cell, or reception of the
last loopback cell
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.8
oacAtmOamVclLoopbackTxRetryUpCount
Counter of consecutive received loopback cells,
before vcl is considered as being up
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.9
oacAtmOamVclLoopbackTxRetryDownCount
Counter of consecutive non received loopback cells,
before vcl is considered as being down
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.10
oacAtmOamVclAlarmState
This object indicates the current
alarm status of the VCL, when error monitoring
is activated on the VCL. Value indicates
the different alarm states tha the VCL can take.
Those alarms can be combined together.
The unkno…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.11
oacAtmOamVclAlarmStateLastChange
The value of sysUpTime object at the time this VCL
entered its current alarm status. If the current state
was entered prior to the last re-initialization of the
agent, then this object contains a zero value.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.12
oacAtmOamVclAisRdiRetryDownCount
Number of consecutive OAM AIS/RDI cells received.
The range is 3 to 60. The default is 3.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.13
oacAtmOamVclAisRdiRetryUpTimer
Number of seconds with no OAM AIS/RDI cells received.
The range is 3 to 60 seconds . The default is 3 seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.14
oacAtmOamVclPvcIntrusive
Enable OAM Intrusivity against Pvc
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.13191.10.3.2.2.1.2.1.15

oacAtmOamVclCountersTable

table
.1.3.6.1.4.1.13191.10.3.2.2.1.3 · 1 row entry · 19 columns
Open in standard view
Uses the oneaccess variant from /opt/observium/mibs/oneaccess.
Command help
Walk oacAtmOamVclCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ONEACCESS-OAM-MIB' -M '/opt/observium/mibs/oneaccess:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ONEACCESS-OAM-MIB::oacAtmOamVclCountersTable' 
An index into table oacAtmOamVclCountersTable
oacAtmOamVclCountersEntry row .1.3.6.1.4.1.13191.10.3.2.2.1.3.1
An index into table oacAtmOamVclCountersTable
Indexes
No indexes recorded
Column Syntax OID
oacAtmOamVclOamCellsReceived
Number of received oam cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.1
oacAtmOamVclEndLoopbackIn
Number of received non looped
end to end oam loopback cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.2
oacAtmOamVclSegLoopbackIn
Number of received non looped
segment oam loopback cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.3
oacAtmOamVclEndLoopIn
Number of received looped end
to end oam loopback cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.4
oacAtmOamVclSegLoopIn
Number of received looped segment
oam loopback cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.5
oacAtmOamVclAisIn
Number of received oam ais cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.6
oacAtmOamVclRdiIn
Number of received oam rdi cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.7
oacAtmOamVclSegCCIn
Number of received oam end to end continuity check cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.8
oacAtmOamVclEndCCIn
Number of received oam segment continuity check cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.9
oacAtmOamVclOamCellsSent
Number of sent oam cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.10
oacAtmOamVclEndLoopbackOut
Number of sent non looped end to end oam loopback cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.11
oacAtmOamVclSegLoopbackOut
Number of sent non looped segment oam loopback cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.12
oacAtmOamVclEndLoopOut
Number of sent looped end to end oam loopback cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.13
oacAtmOamVclSegLoopOut
Number of sent looped segment oam loopback cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.14
oacAtmOamVclAisOut
Number of sent oam ais cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.15
oacAtmOamVclRdiOut
Number of sent oam rdi cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.16
oacAtmOamVclSegCCOut
Number of sent oam end to end continuity check cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.17
oacAtmOamVclEndCCOut
Number of sent oam segment continuity check cells
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.18
oacAtmOamVclOamCellsDropped
Number of received oam cells that are ignored and dropped
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.13191.10.3.2.2.1.3.1.19