ONEACCESS-ETHOAM-EXT-MIB Table View

This table contains a list of Maintenance domain
Intermediate Points.
          
This table manages MIPs which are created by rules
specified on the Maintenance Association (MA) and
Maintenance Domain (MD) on the local device. MIPs can
also be created by rules specified on Default MD Level,
which is covered by dot1agCfmDefaultMdTable in
IEEE8021-CFM-MIB.

oacEthOamExtMipEntry row .1.3.6.1.4.1.13191.10.3.10.2.1.1.1

An entry containing configuration of a particular MIP.
Each row in the table represents a different MIP.

Indexes

oacEthOamMipIfIndex oacEthOamMipMegLevel oacEthOamMipVlanIndex

Column	Syntax	OID
oacEthOamMipIfIndex This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MIP is attached. Upon a restart of the system, the system SHALL, if necessary…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.13191.10.3.10.2.1.1.1.1
oacEthOamMipMegLevel The MEG level of the MIP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.1.1.2
oacEthOamMipVlanIndex The VID associated with the MIP.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.13191.10.3.10.2.1.1.1.3
oacEthOamMipMode The MIP mode. The possible values are: - modey1731 (1) The MIP functions according to the Y.1731 standard - mode802dot1ag (2) The MIP functions according to the IEEE 802.1ag standa…	EthOamExtMipModer/w Type Values: 1 modey1731 2 mode8021ag Description: The CFM standard to which the MIP adheres.	.1.3.6.1.4.1.13191.10.3.10.2.1.1.1.4
oacEthOamMipRowStatus The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13191.10.3.10.2.1.1.1.5

The Extended MEP table stores all the managed objects for
setting the CFM standard of the MEP (Y1731, dot1ag, or hybrid), for
sending LMM/DMM, for enabling transmission of RDI and AIS, for
enabling EFD functionality, and for controlling Multicast Loopbacks.
It is an extension of the standard MEP table.
(AUGMENT - it uses the same indexes as the standard MEP table
dot1agCfmMepTable)
          
*LMM Managed objects
          
LMM Managed objects in the extended MEP table enable the management
entity to initiate transmission of Frame Loss messages.  It will signal
the MEP that it should start to transmit Frame Loss messages (LMM)
and retrieve the information received from the Frame Loss
Responses (LMR).
          
Steps to use entries in this table:
          
1) Wait for oacEthOamMepLossStatus value to be
   false.  To do this do this sequence:
   a. an SNMP GET for both SnmpSetSerialNo and
      oacEthOamMepLossStatus objects (in same SNMP
      PDU).
   b. Check if value for oacEthOamMepLossStatus is false.
      - if not, wait x seconds, go to step a above.
      - if yes, save the value of SnmpSetSerialNo and go
        to step 2) below
2) Change oacEthOamMepLossStatus value from false to
   true to ensure no other management entity will use
   the service. In order to not disturb a possible other NMS
   do this by sending an SNMP SET for both SnmpSetSerialNo
   and oacEthOamMepLossStatus objects (in same SNMP
   PDU,  and make sure SNmpSetSerialNo is the first varBind).
   For the SnmpSetSerialNo varBind, use the value that you
   obtained in step 1)a. This ensures that two cooperating
   NMSes will not step on each others toes.
3) Setup the different data to be sent (destination, priority,
   interval,...), except do not set oacEthOamMepLossMessagesStart.
4) Set oacEthOamMepLossMessagesStart to true to initiate
   transmission of Frame Loss messages.
5) Check the value of oacEthOamMepLossResultOK to
   find out if the operation was successfully initiated or
   not.
6) The results of the running test can be retrieved from
   oacEthOamMepLossNbrOfTxFrames, oacEthOamMepLossNbrOfRxFrames,
   oacEthOamMepLossReplyLoss, oacEthOamMepLossNearEndDrops and
   oacEthOamMepLossFarEndDrops.
7) If you so desire, you can periodically stop and/or restart
   transmission of LMM messages by modifying the
   oacEthOamMepLossMessagesStart accordingly.
8) Change the oacEthOamMepLossStatus value back to
   false to allow other management entities to use the
   table. Setting oacEthOamMepLossStatus to false obviously implies
   that LMMs will no longer be transmitted, and that as such the value
   of oacEthOamMepLossMessagesStart will be ignored.
          
*DMM Managed objects
          
The DMM Managed objects in the extended MEP table are used in a manner
similar to that described for LMM transmission, above. Upon
successfully initiating the transmission, the objects
oacEthOamMepDelayNbrOfTxFrames, oacEthOamMepDelayNbrOfRxFrames,
oacEthOamMepDelayLoss, oacEthOamMepDelayMin, oacEthOamMepDelayMax,
oacEthOamMepDelayAvrg, oacEthOamMepDelayJitterNegMax,
oacEthOamMepDelayJitterAvrgMax, oacEthOamMepDelayJitterPosMax
contain the result of the test.
          
*AIS managed objects
          
The AIS managed objects in the extended MEP table are used in a manner
similar to that described for LMM transmission. In short, first all
managed objects except oacEthOamMepAisTxEnable must be set, then
oacEthOamMepAisTxEnable must be set to true to enable transmission of
AIS. Set it to false to disable transmission again.
          
*Multicast Loopbacks
          
The Multicast Loopback managed objects are used as follows. If wanted,
the SNMP manager first sets the oacEthOamMepMcastLbmDataTlv payload,
or makes sure that the string is empty if no DataTLV is wanted.
Next, the SNMP manager must wait for the oacEthOamMepMcastLbmStatus
flag to be false.
Then, the oacEthOamMepMcastLbmStatus flag must be set to true to
initiate transmission of the Multicast LBM. Then the SNMP manager must
wait until the MEP Multicast Loopback Initiator State Machine has set
this flag back to false, which indicates that the time to wait for
loopback replies has expired. Finally, the oacEthOamLbrNotRespTable and
oacEthOamExtLbrTable tables can be consulted to evaluate the results.
          
*EFD Managed Objects
          
CFM could be considered as a line protocol for controlling Ethernet
interfaces. In case of  Loss of Continuity or AIS or RDI reception,
the interface can be disabled. This feature is called Ethernet Fault
Detection and Propagation, or EFD. It is only available for inward
facing MEPs. When the interface, to which the inward facing MEP
belongs, is disabled, the MEP stays up and CFM frames are still
flowing. When the defect disappears, EFD will bring the MEP's interface
up again.
          
EFD can be enabled with the oacEthOamMepEfdEnable managed object. If
more than one inward facing MEP is configured for a specific interface,
then EFD can only be enabled on one of these MEPs.
          
Once enabled, the EFD state of the interface can be retrieved from the
oacEthOamMepEfdState managed object. In case EFD is triggered, object
dot1agCfmMepDefects from the IEEE8021-CFM-MIB MIB can be used to
further investigate the cause(s) of the EFD trigger.

oacEthOamExtMepEntry row .1.3.6.1.4.1.13191.10.3.10.2.1.2.1

The MEP table entry

Indexes

No indexes recorded

Column	Syntax	OID
oacEthOamMepMode The standard the MEP is following. The possible values are: - modey1731 (1) The MEP functions according to the Y.1731 standard - mode802dot1ag (2) The MEP functions according…	EthOamExtMepModer/w Type Values: 1 modey1731 2 mode8021ag 3 modehybrid Description: The CFM standard to which the MEP adheres.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.1
oacEthOamMepLossDestMacAddress The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column oacCfmMepLossDestIsMepId is 'false'.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.10
oacEthOamMepLossDestMepId The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LMM is to be sent. This address will be used if the value of the column oacCfmMepLossDestIsMepId is 'true'.	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.11
oacEthOamMepLossDestIsMepId True indicates that MEPID of the target MEP is used for FrameLoss transmission. False indicates that unicast destination MAC address of the target MEP is used for FrameLoss transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.12
oacEthOamMepLossVlanPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.13
oacEthOamMepLossInterval Interval between LMM transmissions.	IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w Type Values: 0 intervalInvalid 1 interval300Hz 2 interval10ms 3 interval100ms 4 interval1s 5 interval10s 6 interval1min 7 interval10min	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.14
oacEthOamMepLossStatus A Boolean flag set to true by the MEP Loopback Initiator State Machine or an MIB manager to indicate that LMM messages are going to be transmitted or are already being transmitted. Reset to false by the MEP Loopback Ini…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.15
oacEthOamMepLossMessagesStart A Boolean flag set to true by an MIB manager to start LMM transmission, or set to false by an MIB manager to stop LMM transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.16
oacEthOamMepLossResultOK Indicates the result of the operation: - true The FrameDelay Message(s) will be sent. - false The FrameDelay Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.17
oacEthOamMepLossNbrOfTxFrames The number of sent LMM frames.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.18
oacEthOamMepLossNbrOfRxFrames The number of received LMR frames.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.19
oacEthOamMepLossReplyLoss Difference between the number of sent LMMs and the number of received LMRs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.20
oacEthOamMepLossNearEndDrops Number of in-profile data frames dropped on the interface on which the local MEP is defined, sent by the remote MEP, excluding OAM frames at the MEP's MEG level.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.21
oacEthOamMepLossFarEndDrops Number of in-profile data frames dropped on the interface on which the remote MEP is defined, sent by the local MEP, excluding OAM frames at the MEP's MEG level.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.22
oacEthOamMepDelayDestMacAddress The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column oacCfmMepDelayDestIsMepId is 'false'.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.30
oacEthOamMepDelayDestMepId The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the DMM is to be sent. This address will be used if the value of the column oacCfmMepLossDestIsMepId is 'true'.	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.31
oacEthOamMepDelayDestIsMepId True indicates that MEPID of the target MEP is used for FrameDelay transmission. False indicates that unicast destination MAC address of the target MEP is used for FrameDelay transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.32
oacEthOamMepDelayVlanPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.33
oacEthOamMepDelayInterval Interval between DMM transmissions.	IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w Type Values: 0 intervalInvalid 1 interval300Hz 2 interval10ms 3 interval100ms 4 interval1s 5 interval10s 6 interval1min 7 interval10min	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.34
oacEthOamMepDelayStatus A Boolean flag set to true by the MEP Loopback Initiator State Machine or an MIB manager to indicate that DMM messages are going to be transmitted or are already being transmitted. Reset to false by the MEP Loopback Ini…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.35
oacEthOamMepDelayTimeOut Time to wait for a FrameDelay response, before considering it lost, expressed in multiples of 100msec.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.36
oacEthOamMepDelayMessagesStart A Boolean flag set to true by an MIB manager to start DMM transmission, or set to false by an MIB manager to stop DMM transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.37
oacEthOamMepDelayResultOK Indicates the result of the operation: - true The FrameLoss Message(s) will be sent. - false The FrameLoss Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.38
oacEthOamMepDelayNbrOfTxFrames The number of sent DMM frames.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.39
oacEthOamMepDelayNbrOfRxFrames The number of received DMR frames.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.40
oacEthOamMepDelayLoss Difference between the number of sent DMMs and the number of received DMRs within the delay window (size = 10).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.41
oacEthOamMepDelayMin The minimum delay that was measured in the Delay test, expressed in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.42
oacEthOamMepDelayMax The maximum delay that was measured in the Delay test, expressed in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.43
oacEthOamMepDelayAvrg The average delay that was measured in the Delay test, expressed in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.44
oacEthOamMepDelayJitterNegMax The maximum negative jitter deviation that was measured in the Delay test, expressed in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.45
oacEthOamMepDelayJitterAvrgMax The maximum average jitter that was measured in the Delay test, expressed in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.46
oacEthOamMepDelayJitterPosMax The maximum positive jitter deviation that was measured in the Delay test, expressed in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.47
oacEthOamMepRdiTxEnable Enable the transmission of RDI frames. Since RDI is a bit in the CCM frames, this setting is only taken into account if the transmission of CC messages is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.60
oacEthOamMepMcastLbmStatus A Boolean flag set to true by the MEP Multicast Loopback Initiator State Machine or an MIB manager to start transmission of a single multicast Loopback message. Reset to false by the MEP Multicast Loopback Initiator Sta…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.70
oacEthOamMepMcastLbmResult Indicates the result of the operation: - true The multicast Loopback Message(s) will be (or has been) sent - false The multicast Loopback Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.71
oacEthOamMepMcastLbmSeqNumber The multicast Loopback Transaction Identifier of the next multicast LBM (to be) sent. This sequence number can be zero because it wraps around. The value returned is undefined if oacEthOamMepMcastLbmResult is false.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.72
oacEthOamMepMcastLbmDataTlv An arbitrary amount of data to be included in the Data TLV of the Multicast Loopback message. When set to a zero length string, the dataTlv part of the message is omitted.	OctetStringr/w	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.73
oacEthOamMepAisInterval Interval between AIS transmissions.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.80
oacEthOamMepAisVlanPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted AIS frame.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.81
oacEthOamMepAisTxEnable Enable the transmission of AIS frames.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.82
oacEthOamMepAisClientMegLevel Maintenance level on which the AIS frames will be sent.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.83
oacEthOamMepEfdEnable Enables Ethernet Fault Detection & propagation.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.90
oacEthOamMepEfdState The EFD state of the interface that this MEP belongs to.	EthOamEfdState Type Values: 1 efdDisabled 2 efdIdle 3 efdTriggered Description: Possible EFD states that an interface can reside in. The value can be one of the following: efdDisabled (1) The EFD feature is disabled; efdIdle (2) The EFD feature is enabled, and there i…	.1.3.6.1.4.1.13191.10.3.10.2.1.2.1.91

The multicast Loopback reply table, a list of all received replies.

oacEthOamExtLbrEntry row .1.3.6.1.4.1.13191.10.3.10.2.1.4.1

An entry containing configuration of a particular LBR.
Each row in the table represents a different LBR

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier oacEthOamLbrReceiveOrder

Column	Syntax	OID
oacEthOamLbrReceiveOrder An index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. oacEthOamLbrReceiveOrder are assigned sequentially from 1, in the order that the Loopback Initiator received the LBRs.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.13191.10.3.10.2.1.4.1.1
oacEthOamLbrPeerMacAddress The unicast MAC address of the MEP that replied.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13191.10.3.10.2.1.4.1.2
oacEthOamLbrMepId If the MEP ID can be resolved, the MEPID, else 0.	IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Type Constraints: range: 0..8191	.1.3.6.1.4.1.13191.10.3.10.2.1.4.1.3

Table containing a list of all known peer MEPs which have not
responded to the multicast Loopback Message.

oacEthOamLbrNotRespEntry row .1.3.6.1.4.1.13191.10.3.10.2.1.5.1

An entry containing configuration of a particular MEP.
Each row in the table represents a different MEP`

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier oacEthOamLbrNotRespMepId

Column	Syntax	OID
oacEthOamLbrNotRespMepId The MEP ID of the known peer MEP that did not reply.	IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Type Constraints: range: 0..8191	.1.3.6.1.4.1.13191.10.3.10.2.1.5.1.1
oacEthOamLbrNotRespPeerMacAddress The unicast MAC address of the known peer MEP that has not replied.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13191.10.3.10.2.1.5.1.2