ONEACCESS-ACL-MIB

        Contact updated
    
Source file
ONEACCESS-ACL-MIB
Last revised
Identity
oacAclMIBModule
Base OID
1.3.6.1.4.1.13191.1.100.669
Imported Objects
IF-MIB InterfaceIndex
ONEACCESS-EVENTS-MIB oacEventSeverityLevel oacEventText
ONEACCESS-GLOBAL-REG oacExpIMIpAcl oacMIBModules
RFC1213-MIB DisplayString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the oneaccess MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ONEACCESS-ACL-MIB' -M '/opt/observium/mibs/oneaccess:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ONEACCESS-ACL-MIB::oacAclMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ONEACCESS-ACL-MIB' -M '/opt/observium/mibs/oneaccess:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ONEACCESS-ACL-MIB::oacAclMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (36)
.1.3.6.1.4.1.13191.1.100.669
.1.3.6.1.4.1.13191.10.3.1.2.1
.1.3.6.1.4.1.13191.10.3.1.2.1.1
.1.3.6.1.4.1.13191.10.3.1.2.1.1.1
.1.3.6.1.4.1.13191.10.3.1.2.1.1.1.1
.1.3.6.1.4.1.13191.10.3.1.2.1.1.1.2
.1.3.6.1.4.1.13191.10.3.1.2.1.1.1.3
.1.3.6.1.4.1.13191.10.3.1.2.1.1.1.4
.1.3.6.1.4.1.13191.10.3.1.2.1.1.1.5
.1.3.6.1.4.1.13191.10.3.1.2.1.1.1.6
.1.3.6.1.4.1.13191.10.3.1.2.1.1.1.7
.1.3.6.1.4.1.13191.10.3.1.2.1.1.1.8
.1.3.6.1.4.1.13191.10.3.1.2.1.2
.1.3.6.1.4.1.13191.10.3.1.2.1.3
.1.3.6.1.4.1.13191.10.3.1.2.1.3.1
.1.3.6.1.4.1.13191.10.3.1.2.1.3.2
.1.3.6.1.4.1.13191.10.3.1.2.2
.1.3.6.1.4.1.13191.10.3.1.2.3
.1.3.6.1.4.1.13191.10.3.1.2.3.1
.1.3.6.1.4.1.13191.10.3.1.2.3.1.1
.1.3.6.1.4.1.13191.10.3.1.2.3.1.1.1
.1.3.6.1.4.1.13191.10.3.1.2.3.1.1.2
.1.3.6.1.4.1.13191.10.3.1.2.3.1.1.3
Integer32
.1.3.6.1.4.1.13191.10.3.1.2.3.10
.1.3.6.1.4.1.13191.10.3.1.2.3.2
.1.3.6.1.4.1.13191.10.3.1.2.3.2.1
.1.3.6.1.4.1.13191.10.3.1.2.3.2.1.1
.1.3.6.1.4.1.13191.10.3.1.2.3.2.1.2
.1.3.6.1.4.1.13191.10.3.1.2.3.2.1.3
.1.3.6.1.4.1.13191.10.3.1.2.3.2.1.4
.1.3.6.1.4.1.13191.10.3.1.2.3.3
.1.3.6.1.4.1.13191.10.3.1.2.3.3.1
.1.3.6.1.4.1.13191.10.3.1.2.3.3.2
.1.3.6.1.4.1.13191.10.3.1.2.3.3.3
.1.3.6.1.4.1.13191.10.3.1.2.3.3.4
.1.3.6.1.4.1.13191.10.3.1.2.3.3.5
Dependencies (11) 7 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
Enumeration
mainInterface(1)
subInterface(2)
The interface type
Compliance Statements (1)

OID .1.3.6.1.4.1.13191.10.3.1.2.1.3.2.1
The compliance statement for agents that support the
ONEACCESS-ACL-MIB.
Required groups
Notifications / Traps (6)
NameOIDDescription
.1.3.6.1.4.1.13191.10.3.1.2.2.1
An ACL Notification maximum session reached signifies that
the number of ACL sessions has reached its configured limit
.1.3.6.1.4.1.13191.10.3.1.2.2.2
An ACL Notification warning session reaching limit signifies that
the number of ACL sessions is near from its maximum configured
limit
.1.3.6.1.4.1.13191.10.3.1.2.2.3
An ACL Notification maximum half-session reached signifies that
the number of ACL half-sessions has reached its configured limit,
as stateful inspection is enabled on the device
.1.3.6.1.4.1.13191.10.3.1.2.2.4
An ACL Notification warning half-session reaching limit
signifies that the number of ACL half-sessions is near from
its configured limit. Note that this notification is received
only if stateful inspection is enabled on the device
.1.3.6.1.4.1.13191.10.3.1.2.2.5
An ACL Notification maximum session per host reached signifies that
the number of ACL sessions per host has reached its configured
limit for the host whose IP address is added to the notification
message. This trap is sent only if inspection per host and
stateful inspection is enabled
.1.3.6.1.4.1.13191.10.3.1.2.2.6
An ACL Notification maximum half-session per host reached signifies that
the number of ACL half-sessions per host has reached its configured limit,
for the host whose IP address is added to the notification message. This
trap is sent only if inspection per host and stateful inspection
are enabled