OMNITRON-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
11
.1.3.6.1.4.1.7342.16.2 · 1 row entry · 11 columns
Uses the omnitron variant from /opt/observium/mibs/omnitron.
Command help
Walk ostAclCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-ACL-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-ACL-MIB::ostAclCfgTable'
This table supports the ACL configurations.
ostAclCfgEntry row .1.3.6.1.4.1.7342.16.2.1
This is a ACL configuration table entry. Each row in the table
indicates a specific ACL that is used to match an Ethernet frame
sent to the management port. A matching criteria is then implemented
based upon the ostAclC…
Indexes
Column Syntax OID
An index that is used to identify a specific ACL instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7342.16.2.1.1
The status of the row.

The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7342.16.2.1.2
The accessibility option for the specific ACL instance configured
for the row.

A value of 'deny' indicates that the Ethernet frame that matches
the ACL is NOT acted on by the management port, but is disca…
OMNITRON-TC-MIBOstAccessibiltyTyper/w
Type Values:
1deny
2permit
.1.3.6.1.4.1.7342.16.2.1.3
This object indicates the matching protocol type for the ACL instance
configured for the row.

arp(1) ARP protocol specified
icmp(2) ICMP protocol specfied
ip(3) IP protocol specified
Enumerationr/w
Enumerated Values:
1arp
2icmp
3ip
4tcp
5udp
.1.3.6.1.4.1.7342.16.2.1.4
This object indicates the source IPv4 address for the ACL instance
configured for the row.

For ARP it is the 'Send IP address'.

A value of 0.0.0.0 indicates there is no matching IPv4 addres…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7342.16.2.1.5
This object indicates the source IPv4 address for the ACL instance
configured for the row.

A value of 0.0.0.0 indicates there is no matching ending IPv4 address
and ostAclCfgIpSourceAddr a single matching…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7342.16.2.1.6
This object indicates the destination UDP/TCP port for the ACL
instance configured for the row.

This object is only valid if ostAclCfgProtocol is 'udp' or 'tcp'. It
is ignored otherwise. A value of '-1' i…
Integer32r/w
Constraints:
range: -1-65535
.1.3.6.1.4.1.7342.16.2.1.7
This object indicates the source UDP/TCP port for the ACL
instance configured for the row.

This object is only valid if ostAclCfgProtocol is 'udp' or 'tcp'. It
is ignored otherwise. A value of '-1' indica…
Integer32r/w
Constraints:
range: -1-65535
.1.3.6.1.4.1.7342.16.2.1.8
This object indicates the matching destination management port for
the ACL instance configured for the row.

anyMgtPort(0) Any of the management ports
mgt1Port(1) Management Port 1 (mgt1)
mgt2Port(2) …
Enumerationr/w
Enumerated Values:
0anyMgtPort
1mgt1Port
2mgt2Port
.1.3.6.1.4.1.7342.16.2.1.9
This object specifies a specific ACL source IPv4 or IPv6 address.
If the User IPv4 address has been set via ostAclCfgIpSourceAddr
then this object reflects the same value.

An IPv4 written to this object w…
OMNITRON-TC-MIBOstIpAddrr/w
Type Constraints:
range: 0..39
.1.3.6.1.4.1.7342.16.2.1.10
This object specifies a specific ACL source IPv4 or IPv6 address.
If the User IPv4 address has been set via ostAclCfgIpSourceAddr
then this object reflects the same value.

A value of '::' or 0.0.0.0 indic…
OMNITRON-TC-MIBOstIpAddrr/w
Type Constraints:
range: 0..39
.1.3.6.1.4.1.7342.16.2.1.11