OG-STATUSv2-MIB Table View

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.2.1.3

ogSerialPortDataBits

Serial port character size

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.2.1.4

ogSerialPortParity

Serial port parity

Enumeration

Enumerated Values:

1	none
2	odd
3	even
4	mark
5	space

.1.3.6.1.4.1.25049.17.2.1.5

ogSerialPortStopBits

Serial port number of stop bits

Enumeration

Enumerated Values:

1	one
2	two
3	oneAndAHalf

.1.3.6.1.4.1.25049.17.2.1.6

ogSerialPortFlowControl

Serial port flow control type

Enumeration

Enumerated Values:

1	none
2	hardware
3	software

.1.3.6.1.4.1.25049.17.2.1.7

ogSerialPortMode

Serial port operational mode type

Enumeration

Enumerated Values:

1	none
2	console
3	sdt
4	terminal
5	bridge

.1.3.6.1.4.1.25049.17.2.1.8

ogSerialPortLogLevel

Serial port logging level

Enumeration

Enumerated Values:

1	disabled
2	connect
3	inputAndOutput
4	inputOnly
5	outputOnly

.1.3.6.1.4.1.25049.17.2.1.9

ogSerialPortRxBytes

Serial port bytes received

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.25049.17.2.1.10

ogSerialPortTxBytes

Serial port bytes transmitted

ogSerialPortFramingErrors

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.25049.17.2.1.11

Serial port framing error total.

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.25049.17.2.1.12

ogSerialPortParityErrors

Serial port parity error total.

ogSerialPortOverrunErrors

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.25049.17.2.1.13

Serial port Overrun Error total.

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.25049.17.2.1.14

ogSerialPortBreaks

Serial port break total

ogHostIndex ogHostServiceIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.25049.17.2.1.15

ogSerialPortDCD

The status of the DCD signal.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.2.1.16

ogSerialPortDTR

The status of the DTR signal.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.2.1.17

ogSerialPortDSR

The status of the DSR signal.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.2.1.18

ogSerialPortCTS

The status of the CTS signal.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.2.1.19

ogSerialPortRTS

The status of the RTS signal.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.2.1.20

ogSerialUserTable

table

.1.3.6.1.4.1.25049.17.3 · 1 row entry · 5 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogSerialUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogSerialUserTable'

This entity's serial port users table.

ogSerialUserEntry row .1.3.6.1.4.1.25049.17.3.1

A user logged in on the serial port

Indexes

ogSerialUserIndex

Column	Syntax	OID
ogSerialUserIndex Index within the serial port active users table	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25049.17.3.1.1`
ogSerialUserStartTime The time and date the user session started.	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.25049.17.3.1.2`
ogSerialUserPort Serial port number	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25049.17.3.1.3`
ogSerialUserLabel The readable label for the serial port.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.25049.17.3.1.4`
ogSerialUserName The name of the user logged in on the port.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.25049.17.3.1.5`

ogHostTable

table

.1.3.6.1.4.1.25049.17.4 · 1 row entry · 4 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogHostTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogHostTable'

A table of monitored network hosts.

ogHostEntry row .1.3.6.1.4.1.25049.17.4.1

A monitored network host.

Indexes

ogHostIndex

Column	Syntax	OID
ogHostIndex Index within the network host active users table	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25049.17.4.1.1`
ogHostName The name of this monitored network host.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.25049.17.4.1.2`
ogHostIpV4Address The IPv4 Address of this monitored network host.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.25049.17.4.1.3`
ogHostIpV6Address The IPv6 Address of this monitored network host.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.25049.17.4.1.4`

ogHostServiceTable

table

.1.3.6.1.4.1.25049.17.5 · 1 row entry · 6 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogHostServiceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogHostServiceTable'

A table of services belonging to a monitored host.

ogHostServiceEntry row .1.3.6.1.4.1.25049.17.5.1

A monitored host service.

Indexes

Column Syntax OID

ogHostServiceIndex

Index within the RPC outlet table

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.5.1.1

ogHostServiceHost

The monitored host this service belongs to

ObjectIdentifier

.1.3.6.1.4.1.25049.17.5.1.2

ogHostServiceType

The type of service this is.

Enumeration

Enumerated Values:

1	tcp
2	udp

.1.3.6.1.4.1.25049.17.5.1.3

ogHostServicePort

The TCP Port this service is on.

Unsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.5.1.4

ogHostServiceStatus

The availabalilty of this service.

Enumeration

Enumerated Values:

1	unknown
2	available
3	unavailable

.1.3.6.1.4.1.25049.17.5.1.5

ogHostServiceCounter

The number of alerts related to this service.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.5.1.6

ogHostUserTable

table

.1.3.6.1.4.1.25049.17.6 · 1 row entry · 6 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogHostUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogHostUserTable'

This entity's serial port users table.

ogHostUserEntry row .1.3.6.1.4.1.25049.17.6.1

A user logged in on the serial port

Indexes

ogHostUserIndex

Column	Syntax	OID
ogHostUserIndex Index within the network host active users table	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25049.17.6.1.1`
ogHostUserHost The monitored host this user is associated with.	ObjectIdentifier	`.1.3.6.1.4.1.25049.17.6.1.2`
ogHostUserStartTime The date and time the user session started.	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.25049.17.6.1.3`
ogHostUserAddress The network host address.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.25049.17.6.1.4`
ogHostUserHostName The network host's host name.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.25049.17.6.1.5`
ogHostUserName The network host's active username.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.25049.17.6.1.6`

ogWebUserTable

table

.1.3.6.1.4.1.25049.17.7 · 1 row entry · 5 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogWebUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogWebUserTable'

This entity's Web Interface users table.

ogWebUserEntry row .1.3.6.1.4.1.25049.17.7.1

A user logged in to the Web Interface

Indexes

ogWebUserIndex

Column	Syntax	OID
ogWebUserIndex Index within the Web Interface users table	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25049.17.7.1.1`
ogWebUserStartTime The web users session start date and time.	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.25049.17.7.1.2`
ogWebUserName The web users active username.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.25049.17.7.1.3`
ogWebUserSourceAddress The web users source address.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.25049.17.7.1.4`
ogWebUserSourcePort The web users source tcp port.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25049.17.7.1.5`

ogEmdTable

table

.1.3.6.1.4.1.25049.17.8 · 1 row entry · 9 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogEmdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogEmdTable'

This devices temperature monitoring table.

ogEmdEntry row .1.3.6.1.4.1.25049.17.8.1

EMD status entry

Indexes

ogEmdIndex

Column Syntax OID

ogEmdIndex

Index within the EMD status table

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.8.1.1

ogEmdName

The name of the EMD device.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.8.1.2

ogEmdDescription

A description of the EMD device.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.8.1.3

ogEmdEnabled

The enabled status of the EMD

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.8.1.4

ogEmdLogEnabled

The logging status of the EMD

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.8.1.5

ogEmdConnectType

How the EMD device is connected.

Enumeration

Enumerated Values:

1	internal
2	serial
3	network

.1.3.6.1.4.1.25049.17.8.1.6

ogEmdTemperatureTotal

The number of temperature sensors contained in this EMD.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.8.1.7

ogEmdHumidityTotal

The number of humidity sensors contained in this EMD.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.8.1.8

ogEmdDioInputTotal

The number of DIOs contained in this EMD.

ogEmdIndex ogEmdTemperatureIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.8.1.9

ogEmdTemperatureTable

table

.1.3.6.1.4.1.25049.17.9 · 1 row entry · 6 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogEmdTemperatureTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogEmdTemperatureTable'

A table of temperature sensors belonging to EMDs

ogEmdTemperatureEntry row .1.3.6.1.4.1.25049.17.9.1

EMD status entry

Indexes

Column	Syntax	OID
ogEmdTemperatureIndex Index within the EMD status table	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25049.17.9.1.1`
ogEmdTemperatureEmd The EMD this temperature sensor is related to.	ObjectIdentifier	`.1.3.6.1.4.1.25049.17.9.1.2`
ogEmdTemperatureName The name of the EMD temperature sensor.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.25049.17.9.1.3`
ogEmdTemperatureDescription A description of the EMD device.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.25049.17.9.1.4`
ogEmdTemperatureValue The current temperature reading on the EMD.	degreesSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25049.17.9.1.5`
ogEmdTemperatureCounter Number of alerts triggered on the EMD.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25049.17.9.1.6`

ogEmdHumidityTable

table

.1.3.6.1.4.1.25049.17.10 · 1 row entry · 6 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogEmdHumidityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogEmdHumidityTable'

A table of humidity sensors belonging to EMDs.

ogEmdHumidityEntry row .1.3.6.1.4.1.25049.17.10.1

EMD Humidity sensor status entry.

Indexes

ogEmdIndex ogEmdHumidityIndex

Column	Syntax	OID
ogEmdHumidityIndex Index within the EMD status table	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25049.17.10.1.1`
ogEmdHumidityEmd The EMD this humidity sensor is related to.	ObjectIdentifier	`.1.3.6.1.4.1.25049.17.10.1.2`
ogEmdHumidityName The name of the EMD.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.25049.17.10.1.3`
ogEmdHumidityDescription A description of the EMD device.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.25049.17.10.1.4`
ogEmdHumidityValue The current humidity value on the EMD	percentSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25049.17.10.1.5`
ogEmdHumidityCounter Number of alerts triggered on the EMD	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25049.17.10.1.6`

ogEmdDioTable

table

.1.3.6.1.4.1.25049.17.11 · 1 row entry · 9 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogEmdDioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogEmdDioTable'

Ths Digital I/O status table.

ogEmdDioEntry row .1.3.6.1.4.1.25049.17.11.1

Digital I/O status entry

Indexes

ogEmdIndex ogEmdDioIndex

Column Syntax OID

ogEmdDioIndex

Index within the Digital I/O status table

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.11.1.1

ogEmdDioEmd

The EMD this Digital I/O relates to.

ObjectIdentifier

.1.3.6.1.4.1.25049.17.11.1.2

ogEmdDioName

The ID of this Digital I/O.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.11.1.3

ogEmdDioDescription

A description of this Digital I/O.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.11.1.4

ogEmdDioType

Digital I/O type (TTL Input/Output or High-Voltage Output).

Enumeration

Enumerated Values:

1	ttlInputOutput
2	highVoltageOutput

.1.3.6.1.4.1.25049.17.11.1.5

ogEmdDioDirection

The direction of the Digital I/O (Input or Output)

Enumeration

Enumerated Values:

1	output
2	input

.1.3.6.1.4.1.25049.17.11.1.6

ogEmdDioState

The electrical state value of the Digital I/O (Low or High)

Enumeration

Enumerated Values:

1	high
2	low
3	unavailable

.1.3.6.1.4.1.25049.17.11.1.7

ogEmdDioTriggerMode

The Trigger Mode of the Digital I/O

Enumeration

Enumerated Values:

1	invalid
2	risingEdge
3	fallingEdge
4	risingFallingEdge

.1.3.6.1.4.1.25049.17.11.1.8

ogEmdDioCounter

The trigger counter of this Digital I/O

ogNetInterfaceFailoverState

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.11.1.9

ogNetInterfaceTable

table

.1.3.6.1.4.1.25049.17.12 · 1 row entry · 5 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogNetInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogNetInterfaceTable'

This devices network interface status table.

ogNetInterfaceEntry row .1.3.6.1.4.1.25049.17.12.1

EMD status entry

Indexes

ogNetInterfaceIndex

Column Syntax OID

ogNetInterfaceIndex

Index within the network interface status table

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.12.1.1

ogNetInterfaceName

The name of a network interface.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.12.1.2

ogNetInterfaceType

The type of this network interface entry.

Enumeration

Enumerated Values:

1	unavailable
2	ethernet
3	wifi
4	cellModem
5	v92Modem
6	vpn

.1.3.6.1.4.1.25049.17.12.1.3

ogNetInterfaceState

The current status of this network interface entry.

Enumeration

Enumerated Values:

1	unavailable
2	down
3	starting
4	up
5	stopping

.1.3.6.1.4.1.25049.17.12.1.4

The failover status of this interface.
The primary interface is either active or failed.
The secondary interface is either standby, dormant or active.

Enumeration

Enumerated Values:

1	active
2	failed
3	dormant
4	standby

.1.3.6.1.4.1.25049.17.12.1.5

ogPowerSupplyTable

table

.1.3.6.1.4.1.25049.17.13 · 1 row entry · 5 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogPowerSupplyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogPowerSupplyTable'

This entity's Power Supply table.

ogPowerSupplyEntry row .1.3.6.1.4.1.25049.17.13.1

Power Supply status entry

Indexes

ogPowerSupplyIndex

Column	Syntax	OID
ogPowerSupplyIndex Index within the Power Supply status table	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.25049.17.13.1.1`
ogPowerSupplyName The name of the Power Supply.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.25049.17.13.1.2`
ogPowerSupplyInputVoltage Input voltage of the Power Supply	voltsSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25049.17.13.1.3`
ogPowerSupplyOutputCurrent Output current of the Power Supply	0.01 AmpsSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25049.17.13.1.4`
ogPowerSupplyTemperature Temperature of the Power Supply	degrees celsiusSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25049.17.13.1.5`

ogUpsTable

table

.1.3.6.1.4.1.25049.17.14 · 1 row entry · 35 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogUpsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogUpsTable'

Ths Uninterruptable Power Supply (UPS) status table.

ogUpsEntry row .1.3.6.1.4.1.25049.17.14.1

Digital I/O status entry

Indexes

ogUpsIndex

Column Syntax OID

ogUpsIndex

Index within the UPS status table.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.14.1.1

ogUpsName

The ID of this UPS.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.14.1.2

ogUpsDescription

A description of this UPS.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.14.1.3

ogUpsType

The UPS driver type.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.14.1.4

ogUpsLogEnabled

The logging status of the UPS

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.14.1.5

ogUpsConnectType

How the UPS device is being monitored.

Enumeration

Enumerated Values:

1	unknown
2	usb
3	http
4	https
5	snmp
6	serial

.1.3.6.1.4.1.25049.17.14.1.6

ogUpsState

The current state the UPS is running in.

Enumeration

Enumerated Values:

1	unknown
2	onLine
3	onBattery
4	lowBattery
5	onBypass

.1.3.6.1.4.1.25049.17.14.1.7

ogUpsTemperature

The UPS temperature. Negative if unavailable.

ogUpsBatteryRunTimeRestart

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.8

ogUpsHumidity

The UPS humidity. Negative if unavailable.

percentSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.9

ogUpsBatteryState

The current state of the UPS battery.

Enumeration

Enumerated Values:

1	unknown
2	normal
3	warning
4	low
5	depleted

.1.3.6.1.4.1.25049.17.14.1.10

ogUpsBatteryRunTime

Battery runtime (seconds). Negative if unavailable

secondsInteger32

Constraints:
range: -1-31449600

.1.3.6.1.4.1.25049.17.14.1.11

ogUpsBatteryRunTimeLow

Estimated remaining battery runtime when UPS switches to Low
Battery. Negative if unavailable.

secondsInteger32

Constraints:
range: -1-31449600

.1.3.6.1.4.1.25049.17.14.1.12

Minimum battery runtime for UPS restart after power-off
(seconds). Negative if unavailable.

secondsInteger32

Constraints:
range: -1-31449600

.1.3.6.1.4.1.25049.17.14.1.13

ogUpsBatteryCharge

Estimated percent of Battery charge remaining. Negative if
unavailable.

percentInteger32

Constraints:
range: -1-100

.1.3.6.1.4.1.25049.17.14.1.14

ogUpsBatteryVoltage

The magnitude of the current battery voltage. Negative if
unavailable.

0.1 Volt DCSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.15

ogUpsBatteryNominalVoltage

Nominal battery voltage (V). Negative if unavailable.

0.1 Volt DCSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.16

ogUpsBatteryCurrent

The UPS battery current. Negative if unavailable.

0.1 Amp DCSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.17

ogUpsBatteryNominalCurrent

The nominal UPS battery current. Negative if unavailable.

0.1 Amp DCSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.18

ogUpsBatteryTemperature

The UPS battery temperature. Negative if unavailable.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.19

ogUpsInputFrequency

Input line frequency (Hz). Negative if unavailable.

ogUpsInputNominalFrequency

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.20

Nominal input line frequency (Hz). Negative if unavailable.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.21

ogUpsInputVoltage

The magnitude of the UPS input voltage. Negative if
unavailable.

RMS VoltsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.22

ogUpsInputNominalVoltage

The nominal input voltage. Negative if unavailable.

RMS VoltsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.23

ogUpsInputCurrent

The input current. Negative if unavailable.

0.1 RMS AmpSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.24

ogUpsInputNominalCurrent

The nominal input current. Negative if unavailable.

0.1 RMS AmpSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.25

ogUpsOutputFrequency

Output line frequency (Hz). Negative if unavailable.

ogUpsOutputNominalFrequency

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.26

Nominal output line frequency (Hz). Negative if unavailable.

ogUpsOutputNominalVoltage

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.27

ogUpsOutputVoltage

The magnitude of the UPS output voltage. Negative if
unavailable.

RMS VoltsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.28

The nominal magnitude of the UPS output voltage. Negative if
unavailable.

RMS VoltsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.29

ogUpsOutputCurrent

The magnitude of the UPS input current. Negative if
unavailable.

0.1 RMS AmpSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.30

ogUpsOutputNominalCurrent

The nominal magnitude of the UPS input current. Negative if
unavailable.

0.1 RMS AmpSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.31

ogUpsOutputLoad

Estimated percent of UPS power capacity being used.

percentInteger32

Constraints:
range: 0-100

.1.3.6.1.4.1.25049.17.14.1.32

ogUpsOutputPower

The current value of apparent power (Volt-Amps).
Negative if unavailable.

Volt-AmpsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.33

ogUpsOutputTruePower

The current value of real power (Watts).
Negative if unavailable.

WattsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.14.1.34

ogUpsCounter

Number of alerts triggered on the UPS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.14.1.35

ogRpcTable

table

.1.3.6.1.4.1.25049.17.15 · 1 row entry · 12 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogRpcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogRpcTable'

This entity's Remote Power Controller (RPC) table.

ogRpcEntry row .1.3.6.1.4.1.25049.17.15.1

RPC status entry

Indexes

ogRpcIndex

Column Syntax OID

ogRpcIndex

Index within the RPC status table

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.25049.17.15.1.1

ogRpcName

The name of the RPC device.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.15.1.2

ogRpcDescription

A description for the RPC device.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.15.1.3

ogRpcType

A type for the RPC device.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.15.1.4

ogRpcLogEnabled

The logging status of the RPC

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.15.1.5

ogRpcOutletTotal

The number of outlets on this RPC

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.15.1.6

ogRpcMaxTemperature

Maximum temperature on the RPC

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.15.1.7

ogRpcConnectType

How the RPC device is connected.

Enumeration

Enumerated Values:

1	serial
2	network

.1.3.6.1.4.1.25049.17.15.1.8

ogRpcInputFrequency

Input line frequency (Hz). Negative if unavailable.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.15.1.9

ogRpcInputVoltage

The magnitude of the RPC input voltage. Negative if
unavailable.

RMS VoltsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.15.1.10

ogRpcInputCurrent

The input current. Negative if unavailable.

0.1 RMS AmpSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.15.1.11

ogRpcCounter

Number of alerts triggered on the RPC

ogRpcIndex ogRpcOutletIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.15.1.12

ogRpcOutletTable

table

.1.3.6.1.4.1.25049.17.16 · 1 row entry · 8 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogRpcOutletTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogRpcOutletTable'

This RPC's outlet table.

ogRpcOutletEntry row .1.3.6.1.4.1.25049.17.16.1

RPC Outlet status entry

Indexes

Column Syntax OID

ogRpcOutletIndex

Index within the RPC outlet table

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.16.1.1

ogRpcOutletRpc

The RPC this outlet belongs to

ObjectIdentifier

.1.3.6.1.4.1.25049.17.16.1.2

ogRpcOutletName

The name of the RPC outlet.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.16.1.3

ogRpcOutletState

The power status of the RPC outlet

Enumeration

Enumerated Values:

1	on
2	off
3	transitioning
4	unavailable

.1.3.6.1.4.1.25049.17.16.1.4

ogRpcOutletFrequency

Output line frequency (Hz). Negative if unavailable.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.16.1.5

ogRpcOutletVoltage

The voltage on this outlet. Negative if unavailable.

0.01 AmpsInteger32

Constraints:
range: -1-2640

.1.3.6.1.4.1.25049.17.16.1.6

ogRpcOutletCurrent

Current measured on this outlet. Negative if unavailable.

0.01 AmpsInteger32

Constraints:
range: -1-25500

.1.3.6.1.4.1.25049.17.16.1.7

ogRpcOutletLoad

Estimated percent of RPC outlet power capacity being used.

percentInteger32

Constraints:
range: -1-100

.1.3.6.1.4.1.25049.17.16.1.8

ogCellModemTable

table

.1.3.6.1.4.1.25049.17.17 · 1 row entry · 17 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogCellModemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogCellModemTable'

Ths cellular modem status table.

ogCellModemEntry row .1.3.6.1.4.1.25049.17.17.1

A cellular modem status entry.

Indexes

ogCellModemIndex

Column Syntax OID

ogCellModemIndex

Index of the cellular modem status entry.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.17.1.1

ogCellModemVendor

The Manufacturer ID of Cellular Modem.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.17.1.2

ogCellModemModel

The Cellular Modem model name.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.17.1.3

ogCellModemEnabled

The enabled state of the modem.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.25049.17.17.1.4

ogCellModemConnected

The connected state of the modem.

Enumeration

Enumerated Values:

1	connected
2	disconnected

.1.3.6.1.4.1.25049.17.17.1.5

ogCellModemNetwork

The name of the network provider.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.17.1.6

ogCellModemRegistered

The registration state of the modem.

Enumeration

Enumerated Values:

1	registered
2	unregistered

.1.3.6.1.4.1.25049.17.17.1.7

ogCellModemTower

The current cellular tower ID.

ogCellModemRadioTechnology

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.17.1.8

The current Radio Access Technology being used

Enumeration

Enumerated Values:

1	unavailable
2	cdma
3	evdo
4	gsm
5	umts
6	lte

.1.3.6.1.4.1.25049.17.17.1.9

ogCellModemApn

The APN configured for this cellmodem.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.17.1.10

ogCellModem3gRssi

The current 3G Received Signal Strength (RSSI) if applicable.

Integer32

Constraints:
range: -99-99

.1.3.6.1.4.1.25049.17.17.1.11

ogCellModem4gRssi

The current 4G Received Signal Strength (RSSI) if applicable.

Integer32

Constraints:
range: -99-99

.1.3.6.1.4.1.25049.17.17.1.12

ogCellModemSessionTime

The number of seconds the modem session has been up for.

ogCellModemSelectedSimCard

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.17.1.13

The SIM card currently being used by this modem.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.17.1.14

ogCellModemTemperature

The current temperature of the Cellular Modem.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.17.1.15

ogCellModemCounter

The number of alerts the modem has triggered.

ogWifiClientRxInvalidNwid

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.17.1.16

ogCellModemIMSI

The IMSI of the SIM currently in use by the Cellular Modem.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.17.1.17

ogWifiClientTable

table

.1.3.6.1.4.1.25049.17.18 · 1 row entry · 19 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogWifiClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogWifiClientTable'

Ths wireless client status table.

ogWifiClientEntry row .1.3.6.1.4.1.25049.17.18.1

A wireless client status entry.

Indexes

ogWifiClientIndex

Column Syntax OID

ogWifiClientIndex

Index of the wireless client status entry.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.18.1.1

ogWifiClientInterface

The wireless client network interface name.

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.25049.17.18.1.2

ogWifiClientEnabled

The wireless client enabled state

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.18.1.3

ogWifiClientEssid

The ESSID this wireless client is currently associated with.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.18.1.4

ogWifiClientIeeeMode

The IEEE 802.11 mode of this wireless client.

Enumeration

Enumerated Values:

1	unavailable
2	ieee802Dot11B
3	ieee802Dot11BG
4	ieee802Dot11BGN
5	ieee802Dot11ABGN

.1.3.6.1.4.1.25049.17.18.1.5

ogWifiClientMode

The operating mode of this wireless client.

Enumeration

Enumerated Values:

1	unavailable
2	managed
3	adhoc

.1.3.6.1.4.1.25049.17.18.1.6

ogWifiClientFrequency

The current frequency of this wireless client.

0.0001 THzSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.7

ogWifiClientApMac

The Access Point ID this wireless client is associated with.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.25049.17.18.1.8

ogWifiClientBitRate

The current bit-rate of this wireless client.

Mb/sSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.9

ogWifiClientTxPower

The current Tx-Power of this wireless client.

dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.18.1.10

ogWifiClientLinkQuality

The normalized link quality of this wireless client.

percentSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.11

ogWifiClientRssi

The current Signal Level of this wireless client.

dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.18.1.12

The count of invalid Network ID's for this wireless client.

ogWifiClientRxInvalidCrypt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.13

The count of invalid crypt's for this wireless client.

ogWifiClientRxInvalidFrag

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.14

The count of invalid frag's for this wireless client.

ogWifiClientRxInvalidRetries

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.15

The count of invalid retries for this wireless client.

ogWifiClientRxInvalidMisc

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.16

The count of invalid misc's for this wireless client.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.17

ogWifiClientMissedBeacon

The count of missed beacon's for this wireless client.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.18

ogWifiClientCounter

The number of alerts triggered by this wireless client.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.18.1.19

ogWifiApTable

table

.1.3.6.1.4.1.25049.17.19 · 1 row entry · 8 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogWifiApTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogWifiApTable'

Ths wireless interface status table.

ogWifiApEntry row .1.3.6.1.4.1.25049.17.19.1

A wireless interface status entry

Indexes

ogWifiApIndex

Column Syntax OID

ogWifiApIndex

Index of the wireless server status entry.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.19.1.1

ogWifiApInterface

The wireless access point network interface name.

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.25049.17.19.1.2

ogWifiApEnabled

The enabled status of the wireless server.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.25049.17.19.1.3

ogWifiApSsid

The SSID for this wireless access point.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.19.1.4

ogWifiApIeeeMode

The IEEE 802.11 mode of this wireless access point.

Enumeration

Enumerated Values:

1	unavailable
2	ieee802Dot11B
3	ieee802Dot11BG
4	ieee802Dot11BGN
5	ieee802Dot11ABGN

.1.3.6.1.4.1.25049.17.19.1.5

ogWifiApFrequency

The current frequency of this wireless access point.

0.0001 THzSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.19.1.6

ogWifiApTxPower

The current Tx-Power of this wireless access point.

dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.19.1.7

ogWifiApCounter

The number of alerts triggered by this wireless access point.

ogWifiApIndex ogWifiApClientIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.19.1.8

ogWifiApClientTable

table

.1.3.6.1.4.1.25049.17.20 · 1 row entry · 10 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogWifiApClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogWifiApClientTable'

This RPC's outlet table.

ogWifiApClientEntry row .1.3.6.1.4.1.25049.17.20.1

RPC Outlet status entry

Indexes

Column	Syntax	OID
ogWifiApClientIndex Index within the wireless AP client table	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25049.17.20.1.1`
ogWifiApClientAp The wireless AP this client is assiciated with.	ObjectIdentifier	`.1.3.6.1.4.1.25049.17.20.1.2`
ogWifiApClientMac The MAC address of the Access Point this wireless client is associated with.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.25049.17.20.1.3`
ogWifiApClientInactiveTime The Inactive Time for this wireless client.	millisecondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25049.17.20.1.4`
ogWifiApClientRxBytes The number of received bytes for this wireless client.	bytesSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25049.17.20.1.5`
ogWifiApClientRxPackets The number of received packets for this wireless client.	packetsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25049.17.20.1.6`
ogWifiApClientTxBytes The number of transmitted bytes for this wireless client.	bytesSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25049.17.20.1.7`
ogWifiApClientTxPackets The number of transmitted packets for this wireless client.	packetsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25049.17.20.1.8`
ogWifiApClientRssi The current Signal Level of this wireless client.	dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25049.17.20.1.9`
ogWifiApClientTxBitRate The current transmission bit-rate of this wireless client.	Mb/sSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25049.17.20.1.10`

ogCheckTable

table

.1.3.6.1.4.1.25049.17.21 · 1 row entry · 7 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogCheckTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogCheckTable'

Ths auto-response check table.

ogCheckEntry row .1.3.6.1.4.1.25049.17.21.1

An auto-response check entry

Indexes

ogCheckIndex

Column Syntax OID

ogCheckIndex

Index of the auto-response rule

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.21.1.1

ogCheckName

The ID of this auto-response rule.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.25049.17.21.1.2

ogCheckRepeatTimeout

The minimum seconds before trigger actions can be repeated
for this auto-response.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.21.1.3

ogCheckResetTimeout

The minimum seconds after resolution before this
auto-response can be triggered again.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.21.1.4

ogCheckType

The auto-response check type

Enumeration

Enumerated Values:

1	unknown
2	serialSignal
3	serialUser
4	serialPattern
5	hostPing
6	hostService
7	hostUser
8	webUser
9	envTemperature
10	envHumidity
11	dioInput
12	netInterface
13	powerSupplyInputVoltage
14	powerSupplyOutputCurrent
15	powerSupplyTemperature
16	upsInputVoltage
17	upsBatteryCharge
18	upsBatteryTemperature
19	upsOutputLoad
20	upsInputFrequency
21	upsStateOnBattery
22	upsStateLowBattery
23	rpcInput
24	rpcOutletState
25	rpcOutletOutput
26	cellMessage
27	cellData
28	cellSignal
29	cellApn
30	cellTower
31	cellNetwork
32	wirelessClientConnect
33	wirelessClientSignal
34	wirelessApAssociation
35	wirelessApAuthentication
36	dialPoolHealth
37	cliUser
255	custom

.1.3.6.1.4.1.25049.17.21.1.5

ogCheckTriggerActions

The number of Trigger Actions configured for the auto-response.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.21.1.6

ogCheckResolveActions

The number of Resolve Actions configured for the auto-response.

ogCheckIndex ogCheckDeviceIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25049.17.21.1.7

ogCheckDeviceTable

table

.1.3.6.1.4.1.25049.17.22 · 1 row entry · 4 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogCheckDeviceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogCheckDeviceTable'

The auto-response device reference table.

ogCheckDeviceEntry row .1.3.6.1.4.1.25049.17.22.1

RPC Outlet status entry

Indexes

Column	Syntax	OID
ogCheckDeviceIndex Index within the auto-response device outlet table	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25049.17.22.1.1`
ogCheckDeviceCheck The check this device is associated with.	ObjectIdentifier	`.1.3.6.1.4.1.25049.17.22.1.2`
ogCheckDeviceName The name of a device pertaining to the auto-reponse.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.25049.17.22.1.3`
ogCheckDeviceRef The reference ID of the device pertaining to the auto-reponse.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.25049.17.22.1.4`

ogAlarmLogTable

table

.1.3.6.1.4.1.25049.17.23.1 · 1 row entry · 14 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogAlarmLogTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogAlarmLogTable'

The alarm history table.

ogAlarmLogEntry row .1.3.6.1.4.1.25049.17.23.1.1

An alarm entry.

Indexes

ogAlarmLogIndex

Column Syntax OID

ogAlarmLogIndex

Index within the current alarm table of this alarm.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.23.1.1.1

ogAlarmEventId

Unique event ID for this alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.1.1.2

ogAlarmName

The check ID that this alarm pertains to.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.25049.17.23.1.1.3

ogAlarmCheck

The auto-response index this alarm relates to.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.1.1.4

ogAlarmInstance

The reference index for this alarm instance.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.1.1.5

ogAlarmTime

The UTC date and time for when this alarm was created.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.25049.17.23.1.1.6

ogAlarmType

A reference to an Alarm Type Object.

Enumeration

Enumerated Values:

1	serialSignalCts
2	serialSignalDcd
3	serialSignalDsr
4	serialPatternTx
5	serialPatternRx
6	serialUserSession
7	hostPingDown
8	hostPingUp
9	hostServiceDown
10	hostServiceUp
11	hostUserSession
12	webUserSession
13	envTemperatureLow
14	envTemperatureHigh
15	envHumidityLow
16	envHumidityHigh
17	dioSignalOpened
18	dioSignalClosed
19	netInterfaceDown
20	netInterfaceStarting
21	netInterfaceUp
22	netInterfaceStopping
23	powerSupplyInputVoltageLow
24	powerSupplyInputVoltageHigh
25	powerSupplyOutputCurrentLow
26	powerSupplyOutputCurrentHigh
27	powerSupplyTemperatureLow
28	powerSupplyTemperatureHigh
29	upsTemperatureHigh
30	upsTemperatureLow
31	upsHumidityHigh
32	upsHumidityLow
33	upsOnBattery
34	upsLowBattery
35	upsBatteryChargeLow
36	upsBatteryChargeHigh
37	upsBatteryVoltageLow
38	upsBatteryVoltageHigh
39	upsBatteryCurrentLow
40	upsBatteryCurrentHigh
41	upsBatteryTemperatureLow
42	upsBatteryTemperatureHigh
43	upsInputFrequencyLow
44	upsInputFrequencyHigh
45	upsInputVoltageLow
46	upsInputVoltageHigh
47	upsInputCurrentLow
48	upsInputCurrentHigh
49	upsOutputFrequencyLow
50	upsOutputFrequencyHigh
51	upsOutputVoltageLow
52	upsOutputVoltageHigh
53	upsOutputCurrentLow
54	upsOutputCurrentHigh
55	upsOutputLoadLow
56	upsOutputLoadHigh
57	upsOutputPowerLow
58	upsOutputPowerHigh
59	upsOutputTruePowerLow
60	upsOutputTruePowerHigh
61	rpcInputFrequencyLow
62	rpcInputFrequencyHigh
63	rpcInputVoltageLow
64	rpcInputVoltageHigh
65	rpcInputCurrentLow
66	rpcInputCurrentHigh
67	rpcOutletFrequencyHigh
68	rpcOutletFrequencyLow
69	rpcOutletVoltageHigh
70	rpcOutletVoltageLow
71	rpcOutletCurrentHigh
72	rpcOutletCurrentLow
73	rpcOutletStateOff
74	rpcOutletStateOn
75	cellDataUsage
76	cellMessageReceived
77	cellSignalLow
78	cellSignalHigh
79	cellApnChanged
80	cellTowerChanged
81	cellNetworkChanged
82	wirelessClientConnected
83	wirelessClientDisconnected
84	wirelessClientSignalLow
85	wirelessClientSignalHigh
86	wirelessApAssociation
87	wirelessApDisassociation
88	wirelessApAuthenticationFailure
89	dialPoolHealth
90	cliUserSession
255	customCheckFailure
65535	unknown

.1.3.6.1.4.1.25049.17.23.1.1.7

ogAlarmSummary

The human readable summary of this alarm.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25049.17.23.1.1.8

ogAlarmDevice

The device ID that this alarm pertains to.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25049.17.23.1.1.9

ogAlarmUser

The user ID that this alarm pertains to.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25049.17.23.1.1.10

ogAlarmTriggerValue

The threshold value which triggers the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.1.1.11

ogAlarmCurrentValue

The value as of the time of this entry.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.1.1.12

ogAlarmPreviousValue

The former value of this entry.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.1.1.13

ogAlarmState

The effective alarm state.

Enumeration

Enumerated Values:

1	normal
2	triggered
3	resolving
4	waiting
5	disabled
6	unresolvable

.1.3.6.1.4.1.25049.17.23.1.1.14

ogCurrentAlarmTable

table

.1.3.6.1.4.1.25049.17.23.2 · 1 row entry · 14 columns

Open in standard view

Uses the opengear variant from /opt/observium/mibs/opengear.

Command help

Walk ogCurrentAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OG-STATUSv2-MIB' -M '/opt/observium/mibs/opengear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OG-STATUSv2-MIB::ogCurrentAlarmTable'

The alarm history table.

ogCurrentAlarmEntry row .1.3.6.1.4.1.25049.17.23.2.1

An alarm entry.

Indexes

ogCurrentAlarmIndex

Column Syntax OID

ogCurrentAlarmIndex

Index within the current alarm table of this alarm.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.25049.17.23.2.1.1

ogCurrentAlarmEventId

Unique event ID for this alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.2.1.2

ogCurrentAlarmName

The ID of the check this alarm pertains to.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.25049.17.23.2.1.3

ogCurrentAlarmCheck

The auto-response index this alarm relates to.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.2.1.4

ogCurrentAlarmInstance

The reference index for this alarm instance.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.2.1.5

ogCurrentAlarmTime

The UTC date and time for when this alarm was created.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.25049.17.23.2.1.6

ogCurrentAlarmType

The specific Alarm Type.

Enumeration

Enumerated Values:

1	serialSignalCts
2	serialSignalDcd
3	serialSignalDsr
4	serialPatternTx
5	serialPatternRx
6	serialUserSession
7	hostPingDown
8	hostPingUp
9	hostServiceDown
10	hostServiceUp
11	hostUserSession
12	webUserSession
13	envTemperatureLow
14	envTemperatureHigh
15	envHumidityLow
16	envHumidityHigh
17	dioSignalOpened
18	dioSignalClosed
19	netInterfaceDown
20	netInterfaceStarting
21	netInterfaceUp
22	netInterfaceStopping
23	powerSupplyInputVoltageLow
24	powerSupplyInputVoltageHigh
25	powerSupplyOutputCurrentLow
26	powerSupplyOutputCurrentHigh
27	powerSupplyTemperatureLow
28	powerSupplyTemperatureHigh
29	upsTemperatureHigh
30	upsTemperatureLow
31	upsHumidityHigh
32	upsHumidityLow
33	upsOnBattery
34	upsLowBattery
35	upsBatteryChargeLow
36	upsBatteryChargeHigh
37	upsBatteryVoltageLow
38	upsBatteryVoltageHigh
39	upsBatteryCurrentLow
40	upsBatteryCurrentHigh
41	upsBatteryTemperatureLow
42	upsBatteryTemperatureHigh
43	upsInputFrequencyLow
44	upsInputFrequencyHigh
45	upsInputVoltageLow
46	upsInputVoltageHigh
47	upsInputCurrentLow
48	upsInputCurrentHigh
49	upsOutputFrequencyLow
50	upsOutputFrequencyHigh
51	upsOutputVoltageLow
52	upsOutputVoltageHigh
53	upsOutputCurrentLow
54	upsOutputCurrentHigh
55	upsOutputLoadLow
56	upsOutputLoadHigh
57	upsOutputPowerLow
58	upsOutputPowerHigh
59	upsOutputTruePowerLow
60	upsOutputTruePowerHigh
61	rpcInputFrequencyLow
62	rpcInputFrequencyHigh
63	rpcInputVoltageLow
64	rpcInputVoltageHigh
65	rpcInputCurrentLow
66	rpcInputCurrentHigh
67	rpcOutletFrequencyHigh
68	rpcOutletFrequencyLow
69	rpcOutletVoltageHigh
70	rpcOutletVoltageLow
71	rpcOutletCurrentHigh
72	rpcOutletCurrentLow
73	rpcOutletStateOff
74	rpcOutletStateOn
75	cellDataUsage
76	cellMessageReceived
77	cellSignalLow
78	cellSignalHigh
79	cellApnChanged
80	cellTowerChanged
81	cellNetworkChanged
82	wirelessClientConnected
83	wirelessClientDisconnected
84	wirelessClientSignalLow
85	wirelessClientSignalHigh
86	wirelessApAssociation
87	wirelessApDisassociation
88	wirelessApAuthenticationFailure
89	dialPoolHealth
90	cliUserSession
255	customCheckFailure
65535	unknown

.1.3.6.1.4.1.25049.17.23.2.1.7

ogCurrentAlarmSummary

A readable summary of this alarm.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25049.17.23.2.1.8

ogCurrentAlarmDevice

The ID of the device this alarm pertains to.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25049.17.23.2.1.9

ogCurrentAlarmUser

The ID of the user this alarm pertains to.

ogCurrentAlarmTriggerValue

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25049.17.23.2.1.10

The threshold value which triggers the alarm.

ogCurrentAlarmCurrentValue

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25049.17.23.2.1.11

The value as of the time of this entry.