NetBotz50-MIB Table View

A list of enclosures (base enclosure and pods).

enclosureEntry row .1.3.6.1.4.1.52674.500.2.1.1

Enclosure entry.

Indexes

enclosureIndex

Column	Syntax	OID
enclosureId The id of the physical enclosure.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.2.1.1.1
enclosureStatus The operational status of the enclosure.	OperStatus Type Values: 0 disconnected 1 error 2 normal	.1.3.6.1.4.1.52674.500.2.1.1.2
enclosureErrorStatus The error status of the enclosure. If there are no error conditions reported for the enclosure, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.2.1.1.3
enclosureLabel The unique label assigned to the enclosure (or pod).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.2.1.1.4
enclosureParentEncId The id of the parent enclosure this enclosure is attached to.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.2.1.1.5
enclosureSerialNumber The serial number of this enclosure.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.2.1.1.6
enclosureIndex The index of the physical enclosure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.2.1.1.7

A count of alink-related sensors.

alinkSensorCountEntry row .1.3.6.1.4.1.52674.500.2.2.1.1

A count-of-sensors entry.

Indexes

alinkSensorCountIndex

Column	Syntax	OID
alinkSensorCountId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.2.2.1.1.1
alinkSensorCountValue The number of known connected sensors.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52674.500.2.2.1.1.2
alinkSensorCountLabel The unique label assigned to the sensor count.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.2.2.1.1.3
alinkSensorCountEncId The id of the physical enclosure represented by the sensor count.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.2.2.1.1.4
alinkSensorCountValueStr The sensor count value shown as a string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.2.2.1.1.5
alinkSensorCountValueInt The sensor count as integer value.	Integer32 Constraints: range: 0-6554	.1.3.6.1.4.1.52674.500.2.2.1.1.6
alinkSensorCountIndex The index of the sensor counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.2.2.1.1.7

A list of other port entries.

otherPortEntry row .1.3.6.1.4.1.52674.500.3.10.1

Other port entry.

Indexes

otherPortIndex

Column	Syntax	OID
otherPortId The unique id of the port.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.3.10.1.1
otherPortStatus The operational status of the port.	OperStatus Type Values: 0 disconnected 1 error 2 normal	.1.3.6.1.4.1.52674.500.3.10.1.2
otherPortLabel The unique label assigned to the port.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.3.10.1.3
otherPortEncId The id of the physical enclosure containing the port.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.3.10.1.4
otherPortIndex The index of the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.3.10.1.5

A list of temperature sensor entries.

tempSensorEntry row .1.3.6.1.4.1.52674.500.4.1.1.1

A temperature sensor entry.

Indexes

tempSensorIndex

Column	Syntax	OID
tempSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.1.1.1
tempSensorValue The temperature measured by the sensor in tenths of a degree Celsius.	Integer32 Constraints: range: -500-1000	.1.3.6.1.4.1.52674.500.4.1.1.1.2
tempSensorErrorStatus The error status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition that is n…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.1.1.3
tempSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.1.1.4
tempSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.1.1.5
tempSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.1.1.6
tempSensorValueStr The temperature reading, in degrees celsius, shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.1.1.7
tempSensorValueInt The temperature measured by the sensor in degree Celsius.	Integer32 Constraints: range: -50-100	.1.3.6.1.4.1.52674.500.4.1.1.1.8
tempSensorValueIntF The temperature measured by the sensor in degree Farenheit.	Integer32 Constraints: range: -50-212	.1.3.6.1.4.1.52674.500.4.1.1.1.9
tempSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.1.1.10

A list of humidity sensor entries.

humiSensorEntry row .1.3.6.1.4.1.52674.500.4.1.2.1

A humidity sensor entry.

Indexes

humiSensorIndex

Column	Syntax	OID
humiSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.2.1.1
humiSensorValue The relative humidity measured by the sensor in tenths of a percent.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.52674.500.4.1.2.1.2
humiSensorErrorStatus The error status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition that is n…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.2.1.3
humiSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.2.1.4
humiSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.2.1.5
humiSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.2.1.6
humiSensorValueStr The humidity reading, in percent, shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.2.1.7
humiSensorValueInt The relative humidity measured by the sensor in percent.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.52674.500.4.1.2.1.8
humiSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.2.1.9

A list of dew point sensor entries.

dewPointSensorEntry row .1.3.6.1.4.1.52674.500.4.1.3.1

A dew point sensor entry.

Indexes

dewPointSensorIndex

Column	Syntax	OID
dewPointSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.3.1.1
dewPointSensorValue The dew point value measured by the sensor in tenths of a degree Celsius.	Integer32 Constraints: range: -500-1000	.1.3.6.1.4.1.52674.500.4.1.3.1.2
dewPointSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.3.1.3
dewPointSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.3.1.4
dewPointSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.3.1.5
dewPointSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.3.1.6
dewPointSensorValueStr The dew point reading, in degrees celsius, shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.3.1.7
dewPointSensorValueInt The dew point value measured by the sensor in degrees Celsius.	Integer32 Constraints: range: -50-100	.1.3.6.1.4.1.52674.500.4.1.3.1.8
dewPointSensorValueIntF The dew point reading in degrees Farenheit, measured by the sensor.	Integer32 Constraints: range: -40-122	.1.3.6.1.4.1.52674.500.4.1.3.1.9
dewPointSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.3.1.10

A list of airflow sensor entries.

airFlowSensorEntry row .1.3.6.1.4.1.52674.500.4.1.5.1

An air flow sensor entry.

Indexes

airFlowSensorIndex

Column	Syntax	OID
airFlowSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.5.1.1
airFlowSensorValue The air flow measured by the sensor in tenths of a meter per minute.	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.52674.500.4.1.5.1.2
airFlowSensorErrorStatus The error status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition that is n…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.5.1.3
airFlowSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.5.1.4
airFlowSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.5.1.5
airFlowSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.5.1.6
airFlowSensorValueStr The airflow reading, in meters per minute, shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.5.1.7
airFlowSensorValueInt The air flow measured by the sensor in meters per minute.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.52674.500.4.1.5.1.8
airFlowSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.5.1.9

A list of amp detect sensor entries.

ampDetectSensorEntry row .1.3.6.1.4.1.52674.500.4.1.6.1

An ampere sensor entry.

Indexes

ampDetectSensorIndex

Column	Syntax	OID
ampDetectSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.6.1.1
ampDetectSensorValue The value measured by the sensor in tenths of an ampere.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52674.500.4.1.6.1.2
ampDetectSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.6.1.3
ampDetectSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.6.1.4
ampDetectSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.6.1.5
ampDetectSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.6.1.6
ampDetectSensorValueStr The amp detect reading, in amperes, shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.6.1.7
ampDetectSensorValueInt The value measured by the sensor in amperes.	Integer32 Constraints: range: 0-6554	.1.3.6.1.4.1.52674.500.4.1.6.1.8
ampDetectSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.6.1.9

A list of other numeric sensor entries.

otherNumericSensorEntry row .1.3.6.1.4.1.52674.500.4.1.10.1

Other numeric sensor entry.

Indexes

otherNumericSensorIndex

Column	Syntax	OID
otherNumericSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.10.1.1
otherNumericSensorValue The value measured by the sensor in tenths of the unit of measure.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.10.1.2
otherNumericSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.10.1.3
otherNumericSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.10.1.4
otherNumericSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.10.1.5
otherNumericSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.10.1.6
otherNumericSensorValueStr The sensor reading shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.10.1.7
otherNumericSensorValueInt The value measured by the sensor in the unit of measure (1/10 of otherNumericSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.10.1.8
otherNumericSensorUnits The unit of measure for the sensor value.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.10.1.9
otherNumericSensorValueIntX1000 The value measured by the sensor in thousandths of the unit of measure (100 times otherNumericSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.10.1.10
otherNumericSensorValueIntX1000000 The value measured by the sensor in millionths of the unit of measure (100000 times otherNumericSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.10.1.11
otherNumericSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.10.1.12

A list of wireless network RSSI entries.

rssiSensorEntry row .1.3.6.1.4.1.52674.500.4.1.11.1

RSSI sensor entry.

Indexes

rssiSensorIndex

Column	Syntax	OID
rssiSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.11.1.1
rssiSensorValue The value measured by the sensor in tenths of the unit of measure.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.11.1.2
rssiSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.11.1.3
rssiSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.11.1.4
rssiSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.11.1.5
rssiSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.11.1.6
rssiSensorValueStr The sensor reading shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.11.1.7
rssiSensorValueInt The value measured by the sensor in the unit of measure (1/10 of rssiSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.11.1.8
rssiSensorUnits The unit of measure for the sensor value.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.11.1.9
rssiSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.11.1.10

A list of current input sensor entries.

currentInputSensorEntry row .1.3.6.1.4.1.52674.500.4.1.12.1

Current Input sensor entry.

Indexes

currentInputSensorIndex

Column	Syntax	OID
currentInputSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.12.1.1
currentInputSensorValue The value measured by the sensor in tenths of the unit of measure.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.12.1.2
currentInputSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.12.1.3
currentInputSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.12.1.4
currentInputSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.12.1.5
currentInputSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.12.1.6
currentInputSensorValueStr The sensor reading shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.12.1.7
currentInputSensorValueInt The value measured by the sensor in the unit of measure (1/10 of currentInputSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.12.1.8
currentInputSensorUnits The unit of measure for the sensor value.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.12.1.9
currentInputSensorValueIntX1000 The value measured by the sensor in thousandths of the unit of measure (100 times currentInputSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.12.1.10
currentInputSensorValueIntX1000000 The value measured by the sensor in millionths of the unit of measure (100000 times currentInputSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.12.1.11
currentInputSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.12.1.12

A list of current input sensor entries.

voltageSensorEntry row .1.3.6.1.4.1.52674.500.4.1.13.1

Voltage sensor entry.

Indexes

voltageSensorIndex

Column	Syntax	OID
voltageSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.13.1.1
voltageSensorValue The value measured by the sensor in tenths of the unit of measure.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.13.1.2
voltageSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.13.1.3
voltageSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.13.1.4
voltageSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.13.1.5
voltageSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.13.1.6
voltageSensorValueStr The sensor reading shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.13.1.7
voltageSensorValueInt The value measured by the sensor in the unit of measure (1/10 of voltageSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.13.1.8
voltageSensorUnits The unit of measure for the sensor value.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.13.1.9
voltageSensorValueIntX1000 The value measured by the sensor in thousandths of the unit of measure (100 times voltageSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.13.1.10
voltageSensorValueIntX1000000 The value measured by the sensor in millionths of the unit of measure (100000 times voltageSensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.13.1.11
voltageSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.13.1.12

A list of current input sensor entries.

batterySensorEntry row .1.3.6.1.4.1.52674.500.4.1.14.1

Battery sensor entry.

Indexes

batterySensorIndex

Column	Syntax	OID
batterySensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.14.1.1
batterySensorValue The value measured by the sensor in tenths of the unit of measure.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.14.1.2
batterySensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.1.14.1.3
batterySensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.14.1.4
batterySensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.14.1.5
batterySensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.1.14.1.6
batterySensorValueStr The sensor reading shown as a string (or empty string if it is not plugged into a port).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.14.1.7
batterySensorValueInt The value measured by the sensor in the unit of measure (1/10 of batterySensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.14.1.8
batterySensorUnits The unit of measure for the sensor value.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.1.14.1.9
batterySensorValueIntX1000 The value measured by the sensor in thousandths of the unit of measure (100 times batterySensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.14.1.10
batterySensorValueIntX1000000 The value measured by the sensor in millionths of the unit of measure (100000 times batterySensorValue)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.1.14.1.11
batterySensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.1.14.1.12

A list of dry contact sensor entries.

dryContactSensorEntry row .1.3.6.1.4.1.52674.500.4.2.1.1

Dry contact sensor entry.

Indexes

dryContactSensorIndex

Column	Syntax	OID
dryContactSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.1.1.1
dryContactSensorValue Whether the dry sensor contact is open or closed.	Enumeration Enumerated Values: -1 undefined 0 open 1 closed	.1.3.6.1.4.1.52674.500.4.2.1.1.2
dryContactSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.1.1.3
dryContactSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.1.1.4
dryContactSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.1.1.5
dryContactSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.1.1.6
dryContactSensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.1.1.7
dryContactSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.1.1.8

A list of door switch sensor entries.

doorSwitchSensorEntry row .1.3.6.1.4.1.52674.500.4.2.2.1

Door switch sensor entry.

Indexes

doorSwitchSensorIndex

Column	Syntax	OID
doorSwitchSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.2.1.1
doorSwitchSensorValue Whether the door is open or closed.	Enumeration Enumerated Values: -1 undefined 0 open 1 closed	.1.3.6.1.4.1.52674.500.4.2.2.1.2
doorSwitchSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.2.1.3
doorSwitchSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.2.1.4
doorSwitchSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.2.1.5
doorSwitchSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.2.1.6
doorSwitchSensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.2.1.7
doorSwitchSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.2.1.8

A list of camera motion sensor entries.

cameraMotionSensorEntry row .1.3.6.1.4.1.52674.500.4.2.3.1

Camera motion sensor entry.

Indexes

cameraMotionSensorIndex

Column	Syntax	OID
cameraMotionSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.3.1.1
cameraMotionSensorValue Whether motion is detected by the camera sensor.	Enumeration Enumerated Values: -1 undefined 0 noMotion 1 motionDetected	.1.3.6.1.4.1.52674.500.4.2.3.1.2
cameraMotionSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.3.1.3
cameraMotionSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.3.1.4
cameraMotionSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.3.1.5
cameraMotionSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.3.1.6
cameraMotionSensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.3.1.7
cameraMotionSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.3.1.8

A list of other state sensor entries.

otherStateSensorEntry row .1.3.6.1.4.1.52674.500.4.2.10.1

Other state sensor entry.

Indexes

otherStateSensorIndex

Column	Syntax	OID
otherStateSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.10.1.1
otherStateSensorValue State value reported by the sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52674.500.4.2.10.1.2
otherStateSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.10.1.3
otherStateSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.10.1.4
otherStateSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.10.1.5
otherStateSensorPortId The id of port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.10.1.6
otherStateSensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.10.1.7
otherStateSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.10.1.8

A list of vibration sensor entries.

vibrationSensorEntry row .1.3.6.1.4.1.52674.500.4.2.11.1

Vibration sensor entry.

Indexes

vibrationSensorIndex

Column	Syntax	OID
vibrationSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.11.1.1
vibrationSensorValue Whether vibration is detected.	Enumeration Enumerated Values: -1 undefined 0 noVibration 1 vibrationDetected	.1.3.6.1.4.1.52674.500.4.2.11.1.2
vibrationSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.11.1.3
vibrationSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.11.1.4
vibrationSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.11.1.5
vibrationSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.11.1.6
vibrationSensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.11.1.7
vibrationSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.11.1.8

A list of smoke sensor entries.

smokeSensorEntry row .1.3.6.1.4.1.52674.500.4.2.12.1

Smoke sensor entry.

Indexes

smokeSensorIndex

Column	Syntax	OID
smokeSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.12.1.1
smokeSensorValue Whether smoke is detected.	Enumeration Enumerated Values: -1 undefined 0 noSmoke 1 smokeDetected	.1.3.6.1.4.1.52674.500.4.2.12.1.2
smokeSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.12.1.3
smokeSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.12.1.4
smokeSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.12.1.5
smokeSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.12.1.6
smokeSensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.12.1.7
smokeSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.12.1.8

A list of leak sensor entries.

leakSensorEntry row .1.3.6.1.4.1.52674.500.4.2.13.1

Leak sensor entry.

Indexes

leakSensorIndex

Column	Syntax	OID
leakSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.13.1.1
leakSensorValue Whether a leak is detected.	Enumeration Enumerated Values: -1 undefined 0 noLeak 1 leakDetected	.1.3.6.1.4.1.52674.500.4.2.13.1.2
leakSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.13.1.3
leakSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.13.1.4
leakSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.13.1.5
leakSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.13.1.6
leakSensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.13.1.7
leakSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.13.1.8

A list of beacon entries.

beaconEntry row .1.3.6.1.4.1.52674.500.4.2.14.1

Beacon entry.

Indexes

beaconIndex

Column	Syntax	OID
beaconId The unique id of the beacon.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.14.1.1
beaconValue Whether the beacon is flashing.	Enumeration Enumerated Values: -1 undefined 0 off 1 on	.1.3.6.1.4.1.52674.500.4.2.14.1.2
beaconErrorStatus The operational status of the beacon. If there are no error conditions reported for the beacon, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.14.1.3
beaconLabel The unique label assigned to the beacon.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.14.1.4
beaconEncId The id of the physical enclosure containing the beacon.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.14.1.5
beaconPortId The id of the port the beacon is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.14.1.6
beaconValueStr The enum value label for the state reported by the beacon.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.14.1.7
beaconIndex The index of the beacon.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.14.1.8

A list of switched outlet entries.

switchedOutletEntry row .1.3.6.1.4.1.52674.500.4.2.15.1

Switched outlet entry.

Indexes

switchedOutletIndex

Column	Syntax	OID
switchedOutletId The unique id of the switched outlet.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.15.1.1
switchedOutletValue Whether the switched outlet is on or off.	Enumeration Enumerated Values: -1 undefined 0 off 1 on	.1.3.6.1.4.1.52674.500.4.2.15.1.2
switchedOutletErrorStatus The operational status of the switched outlet. If there are no error conditions reported for the switched outlet, the status is normal. Otherwise, the status is reported as the severity value of the highest severity e…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.15.1.3
switchedOutletLabel The unique label assigned to the switched outlet.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.15.1.4
switchedOutletEncId The id of the physical enclosure containing the switched outlet.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.15.1.5
switchedOutletPortId The id of the port the switched outlet is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.15.1.6
switchedOutletValueStr The enum value label for the state reported by the switchedOutlet.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.15.1.7
switchedOutletIndex The index of the switched outlet.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.15.1.8

A list of door lock sensor entries.

doorLockSensorEntry row .1.3.6.1.4.1.52674.500.4.2.16.1

Door lock sensor entry.

Indexes

doorLockSensorIndex

Column	Syntax	OID
doorLockSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.16.1.1
doorLockSensorValue When setting this object only unlocked(0) or locked(1) is valid.	Enumerationr/w Enumerated Values: -1 undefined 0 unlocked 1 locked	.1.3.6.1.4.1.52674.500.4.2.16.1.2
doorLockSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.16.1.3
doorLockSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.16.1.4
doorLockSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.16.1.5
doorLockSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.16.1.6
doorLockSensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.16.1.7
doorLockSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.16.1.8

A list of rack handle sensor entries.

rackHandleSensorEntry row .1.3.6.1.4.1.52674.500.4.2.17.1

Rack door handle sensor entry.

Indexes

rackHandleSensorIndex

Column	Syntax	OID
rackHandleSensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.17.1.1
rackHandleSensorValue Whether the door is open or closed.	Enumeration Enumerated Values: -1 undefined 0 open 1 closed	.1.3.6.1.4.1.52674.500.4.2.17.1.2
rackHandleSensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.17.1.3
rackHandleSensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.17.1.4
rackHandleSensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.17.1.5
rackHandleSensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.17.1.6
rackHandleSensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.17.1.7
rackHandleSensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.17.1.8

A list of output relay entries.

outputRelaySensorEntry row .1.3.6.1.4.1.52674.500.4.2.18.1

Output relay sensor entry.

Indexes

outputRelaySensorIndex

Column	Syntax	OID
outputRelaySensorId The unique id of the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.18.1.1
outputRelaySensorValue Whether the relay is open or closed.	Enumeration Enumerated Values: -1 undefined 0 open 1 closed	.1.3.6.1.4.1.52674.500.4.2.18.1.2
outputRelaySensorErrorStatus The operational status of the sensor. If there are no error conditions reported for the sensor, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition tha…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.4.2.18.1.3
outputRelaySensorLabel The unique label assigned to the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.18.1.4
outputRelaySensorEncId The id of the physical enclosure containing the sensor.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.18.1.5
outputRelaySensorPortId The id of the port the sensor is plugged into (or empty string if it is not plugged into a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.4.2.18.1.6
outputRelaySensorValueStr The enum value label for the state reported by the sensor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.4.2.18.1.7
outputRelaySensorIndex The index of the sensor.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.4.2.18.1.8

A list of active and resolved error conditions.

errorCondEntry row .1.3.6.1.4.1.52674.500.5.1.1

Error condition entry.

Indexes

errorCondIndex

Column	Syntax	OID
errorCondId The unique id of the error condition.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.5.1.1.1
errorCondSeverity The relative severity of the error condition.	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.5.1.1.2
errorCondTypeId The error type id reported for the error condition.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.5.1.1.3
errorCondStartTime The start time of the error condition, in msec since 1/1/1970.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.52674.500.5.1.1.4
errorCondStartTimeStr The start time of the error condition, as ISO date-time formatted string (UTC).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.5.1.1.5
errorCondResolved Whether the error condition was resolved.	BoolValue Type Values: 0 no 1 yes 2 null	.1.3.6.1.4.1.52674.500.5.1.1.6
errorCondResolvedTime The time the error condition was resolved (if it was resolved), in msec since 1/1/1970.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.52674.500.5.1.1.7
errorCondResolvedTimeStr The time the error condition was resolved (if it was resolved), as ISO date-time formatted string (UTC).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.5.1.1.8
errorCondEncId The id of the physical enclosure associated with the error.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.5.1.1.9
errorCondPortId The id of the port associated with the error (or empty string if the error is not associated with a port).	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.5.1.1.10
errorCondSensorId The id of the sensor associated with the error (or empty string if the error is not associated with a sensor.)	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.5.1.1.11
errorCondIndex The index of the error condition.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.5.1.1.12

A list of configured camera's.

cameraEntry row .1.3.6.1.4.1.52674.500.6.1.1

Camera entry.

Indexes

cameraIndex

Column	Syntax	OID
cameraId The id of the camera.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.6.1.1.1
cameraVendor The vendor of the camera.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.6.1.1.2
cameraModel The model of the camera.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.6.1.1.3
cameraConnectionStatus The operational status of the camera.	OperStatus Type Values: 0 disconnected 1 error 2 normal	.1.3.6.1.4.1.52674.500.6.1.1.4
cameraErrorStatus The error status of the camera. If there are no error conditions reported for the camera, the status is normal. Otherwise, the status is reported as the severity value of the highest severity error condition that is n…	ErrorStatus Type Values: 0 normal 1 info 2 warning 3 error 4 critical 5 failure	.1.3.6.1.4.1.52674.500.6.1.1.5
cameraLabel The unique label assigned to the camera.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52674.500.6.1.1.6
cameraAddress The address or host name of the camera.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.6.1.1.7
cameraIndex The index of the physical enclosure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.6.1.1.8

A list of firmware versions contained in the NetBotz distribution.

firmwareEntry row .1.3.6.1.4.1.52674.500.7.1.1

Firmware entry.

Indexes

firmwareIndex

Column	Syntax	OID
firmwareDescription Name of of the firmware product.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.7.1.1.1
firmwareVersion Version of of the firmware product.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.52674.500.7.1.1.2
firmwareIndex The index of the firmware.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52674.500.7.1.1.3