NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB Table View

A list of IPD12000, IPD4000 Access/Inverse module and Mini/Micro
DSLAM entries.

ifCfgPortEntry row .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1

An entry containing management information applicable to the IPD12000, IPD4000
Access/Inverse module as well as the Mini/Micro DSLAM.

Indexes

ifCfgSlotIndex ifCfgPortIndex

Column	Syntax	OID
ifCfgSlotIndex The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro DSLAM will have a slot index value of 1.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.1
ifCfgPortIndex The physical port number of the interface.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.2
ifCfgPortCircuitID The circuit identification number assigned to a port on an interface.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.3
ifCfgPortFltrIp1Start The value assigned to a port which designates the start of the first Ip filter range.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.4
ifCfgPortFltrIp1End The value assigned to a port which designates the end of the first Ip filter range.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.5
ifCfgPortFltrIp2Start The value assigned to a port which designates the start of the second Ip filter range.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.6
ifCfgPortFltrIp2End The value assigned to a port which designates the end of the second Ip filter range.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.7
ifCfgPortBackboneVlan The Backbone VLAN tag will become the primary identifier that can be used by routers with backbone capabilities to direct traffic to the appropriate network cloud.	Integer32r/w Constraints: range: 0-4085	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.8
ifCfgPortVlanPriority The value assigned to a port which designates the VLAN priority.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.9
ifCfgPortFloodMde The value assigned to a port which designates the flood mode.	Enumerationr/w Enumerated Values: 1 uplFlood 2 vlnFlood	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.10
ifCfgPortIpFltProtocol The value assigned to a port which designates the IP filter protocol.	Enumerationr/w Enumerated Values: 1 protocolALL 2 protocolIP	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.11
ifCfgPortReset This value is always read as integer value 2. Reset all associated port statistics to zero upon initiation of the reset(1).	Enumerationr/w Enumerated Values: 1 reset 2 noReset	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.12
ifCfgPortBkBoneEthType The value assigned to a port which designates the ethernet packet type.	Enumerationr/w Enumerated Values: 1 ethtype8100 2 ethtype9100	.1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.13

A list of IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM
port 802.1Q VLAN entries.

ifCfgPortVLANEntry row .1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1

An entry containing management information applicable to an IPD12000, IPD4000
Access/Inverse module and Mini/Micro DSLAM port.

Indexes

ifCfgIfSlotIndex ifCfgIfPortIndex ifCfgVLANIndex

Column	Syntax	OID
ifCfgIfSlotIndex The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.1
ifCfgIfPortIndex The physical port number of the interface.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.2
ifCfgVLANIndex A pointer to one of ten possible VLAN tags that can be assigned to a port.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.3
ifCfgVLANIdStart The value assigned to a port which designates the start of a VLAN ID range.	Integer32r/w Constraints: range: 0-4085	.1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.4
ifCfgVLANIdEnd The value assigned to a port which designates the end of a VLAN ID range.	Integer32r/w Constraints: range: 0-4085	.1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.5

A list of ADSL interface entries.

ifCfgPortAdslEntry row .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1

An entry containing management information applicable to ADSL module.

Indexes

ifCfgAdslSlotIndex ifCfgAdslPortIndex

Column	Syntax	OID
ifCfgAdslSlotIndex The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.1
ifCfgAdslPortIndex The physical port number of the ADSL interface.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.2
ifCfgPortAdslPortMode The port mode of operation, ON, OFF, or Adaptive. When a port is set to Adaptive mode, the best possible value for the Rx/Tx data rates will be achieved. A successful data rate connection will be indicat…	Enumerationr/w Enumerated Values: 1 on 2 off 3 adaptive 4 fixedadaptive	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.3
ifCfgPortAdslVpiVciDetect ADSL Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) detect mode. If this mode is set to ON, auto-detect the line VPI and VCI values.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.4
ifCfgPortAdslRxRate ADSL upstream (Rx) data rate. The available upstream data rates range from 32Kbps to 1024Kbps. The upstream data rate can be set by the user via the set value x where x = 1 to 32. The actual data r…	KbpsInteger32r/w Constraints: range: 1-32	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.5
ifCfgPortAdslTxRate ADSL downstream (Tx) data rates. The available downstream data rates range from 32Kbps to 8064Kbps. The downstream data rate can be set by the user via the set value x where x = 1 to 252. The actual da…	KbpsInteger32r/w Constraints: range: 1-252	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.6
ifCfgPortAdslFrameType ADSL frame type.	Enumerationr/w Enumerated Values: 1 frameType1483LLC 2 frameType1483VCM	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.7
ifCfgPortAdslVpi ADSL Virtual Path Identifier (VPI) value.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.8
ifCfgPortAdslVci ADSL Virtual Channel Identifier (VCI).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.9
ifCfgPortAdslStandardMde ADSL standard modes of operation. Note: if receive a standard mode of integer value 255 (0xFF), this would indicate that the standard mode is unknown due to a port 'linkdown' condition.	Enumerationr/w Enumerated Values: 1 t1413 2 gLite 3 gDMT 4 multiMode 5 aLCATEL 6 gDMT-BIS 7 gDMT-BISplus 8 gDMT-BIS-Annex-L 9 gDMT-BIS-Annex-M 255 stdMdeNoLink	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.10
ifCfgPortAdslCorrectionUp ADSL Impulse protection duration in the Upstream duration.	Enumerationr/w Enumerated Values: 1 corr125us 2 corr250us 3 corr500us 4 corr1ms 5 corr2ms 6 corr4ms	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.11
ifCfgPortAdslCorrectionDn ADSL Impulse protection duration in the Upstream duration.	Enumerationr/w Enumerated Values: 1 corr125us 2 corr250us 3 corr500us 4 corr1ms 5 corr2ms 6 corr4ms	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.12
ifCfgPortAdslDelayUp ADSL Impulse protection duration in the Upstream direction.	Enumerationr/w Enumerated Values: 1 delay1ms 2 delay2ms 3 delay4ms 4 delay8ms 5 delay16ms 6 delay32ms 7 delay64ms	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.13
ifCfgPortAdslDelayDn ADSL Impulse protection duration in the Upstream direction.	Enumerationr/w Enumerated Values: 1 delay1ms 2 delay2ms 3 delay4ms 4 delay8ms 5 delay16ms 6 delay32ms 7 delay64ms	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.14
ifCfgPortAdslEcFdm ADSL Echo Cancellation uses Upstream Tones for Upstream and Dnstream data.	Enumerationr/w Enumerated Values: 1 ec 2 fdm	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.15
ifCfgPortAdslFastBuffer Selects fast buffer/low latency. Same is interleave delay of 1ms	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.16
ifCfgPortAdslSnrUp Selects Target Upstream SNR	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.17
ifCfgPortAdslSnrDn Selects Target Dnstream SNR	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.18
ifCfgPortAdslActualRxRate ADSL upstream (Rx) data rate. The available upstream data rates range from 32Kbps to 1024Kbps. The upstream data rate can be set by the user via the set value x where x = 1 to 64. The actual data r…	KbpsInteger32 Constraints: range: 0-64	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.19
ifCfgPortAdslActualTxRate ADSL downstream (Tx) data rates. The available downstream data rates range from 32Kbps to 8064Kbps. The downstream data rate can be set by the user via the set value x where x = 1 to 1024. The actual d…	KbpsInteger32 Constraints: range: 0-1024	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.20
ifCfgPortAdslActualStandardMde ADSL current operating mode, should match ifCfgPortAdslStandardMde UNLESS operating in MULTIMODE	Enumeration Enumerated Values: 1 t1413 2 gLite 3 gDMT 4 multiMode 5 aLCATEL 6 gDMT-BIS 7 gDMT-BISplus 8 gDMT-BIS-Annex-L 9 gDMT-BIS-Annex-M 255 stdMdeNoLink	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.21
ifCfgPortAdslActualDepthUp ADSL upstream interleving depth.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.22
ifCfgPortAdslActualDepthDn ADSL dnstream interleaving depth.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.23

A list of IDSL interface entries.

ifCfgPortIdslEntry row .1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1

An entry containing management information applicable to the IDSL interface.

Indexes

ifCfgIdslSlotIndex ifCfgIdslPortIndex

Column	Syntax	OID
ifCfgIdslSlotIndex The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1.1
ifCfgIdslPortIndex The physical port number of the IDSL interface.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1.2
ifCfgPortIdslRxTxRate IDSL symetrical (Rx/Tx) data rates. IDSL module types and the associated Rx/Tx data rates- IAM144-12: Data Rates (Kbps): 128,144 …	KbpsEnumerationr/w Enumerated Values: 0 idslRxTxRateDefect 1 idslRxTxRate128 2 idslRxTxRate144 255 idslRxTxRateOff	.1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1.3

A list of SDSL interface entries.

ifCfgPortSdslEntry row .1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1

An entry containing management information applicable to the SDSL interface.

Indexes

ifCfgSdslSlotIndex ifCfgSdslPortIndex

Column	Syntax	OID
ifCfgSdslSlotIndex The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.1
ifCfgSdslPortIndex The physical port number of the SDSL interface.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.2
ifCfgPortSdslRxTxRate SDSL symetrical (Rx/Tx) data rates. SDSL module types and the associated Rx/Tx data rates- SAM1000-12: Data Rates (Kbps): 272,528,784,1168 …	KbpsEnumerationr/w Enumerated Values: 0 sdslRxTxRateDefect 1 sdslRxTxRate144 2 sdslRxTxRate272 3 sdslRxTxRate400 4 sdslRxTxRate528 5 sdslRxTxRate784 6 sdslRxTxRate1040 7 sdslRxTxRate1168 8 sdslRxTxRate1552 9 sdslRxTxRate2064 10 sdslRxTxRate2320 255 sdslRxTxRateOff	.1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.3
ifCfgPortSdslLineCode Line code for the SDSL modules. Note, the line code may be set on the following modules, SIM2000-12,SIM2000-24,SIM2000V-24,SIM2000V-12, or the SDSL micro DSLAM. The line code options …	Enumerationr/w Enumerated Values: 1 lineCodeCap 2 lineCode2B1Q 3 lineCodeGSHDSL	.1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.4

A list of T1 interface entries.

ifCfgPortT1Entry row .1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1

An entry containing management information applicable to the T1 interface.

Indexes

ifCfgT1SlotIndex ifCfgT1PortIndex

Column	Syntax	OID
ifCfgT1SlotIndex The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.1
ifCfgT1PortIndex The physical port number of the T1 interface.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.2
ifCfgPortT1RxTxRate T1 symetrical (Rx/Tx) data rates. T1 module types and the associated Rx/Tx data rates- TAM1500-12,TIM1500-12,TIM1500-24: Data Rates (Kbps): 192,384,576,768,960,115…	KbpsEnumerationr/w Enumerated Values: 0 t1RxTxRateDefect 1 t1RxTxRate192 2 t1RxTxRate384 3 t1RxTxRate576 4 t1RxTxRate768 5 t1RxTxRate960 6 t1RxTxRate1152 7 t1RxTxRate1344 8 t1RxTxRate1536 255 t1RxTxRateOff	.1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.3
ifCfgPortT1FrameType T1 frame type.	Enumerationr/w Enumerated Values: 1 t1frameTypeESF 2 t1frameTypeSFD4	.1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.4
ifCfgPortT1LineCode T1 line code.	Enumerationr/w Enumerated Values: 1 t1lineCodeB8ZS 2 t1lineCodeAMI	.1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.5
ifCfgPortT1TxBuildOut T1 tx buildout.	Enumerationr/w Enumerated Values: 1 t1TxBuildOut0db 2 t1TxBuildOutN7p5db 3 t1TxBuildOutN15db 4 t1TxBuildOutN22db	.1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.6
ifCfgPortT1ClockSrc T1 clock source.	Enumerationr/w Enumerated Values: 1 t1ClockSrcLocal 2 t1ClockSrcLoop	.1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.7

A list of E1 interface entries.

ifCfgPortE1Entry row .1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1

An entry containing management information applicable to the E1 interface.

Indexes

ifCfgE1SlotIndex ifCfgE1PortIndex

Column	Syntax	OID
ifCfgE1SlotIndex The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.1
ifCfgE1PortIndex The physical port number of the E1 interface.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.2
ifCfgPortE1RxTxRate E1 symetrical (Rx/Tx) data rates. E1 module types and the associated Rx/Tx data rates- EAM2000-12,EIM2000-12,EIM2000-24: Data Rates (Kbps): 256,512,768,1024,1280,1…	KbpsEnumerationr/w Enumerated Values: 0 e1RxTxRateDefect 1 e1RxTxRate256 2 e1RxTxRate512 3 e1RxTxRate768 4 e1RxTxRate1024 5 e1RxTxRate1280 6 e1RxTxRate1536 7 e1RxTxRate1792 8 e1RxTxRate1984 255 e1RxTxRateOff	.1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.3
ifCfgPortE1FrameType E1 frame type.	Enumerationr/w Enumerated Values: 1 e1frameTypeCRC 2 e1frameTypeNoCRC	.1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.4
ifCfgPortE1LineCode E1 line code.	Enumerationr/w Enumerated Values: 1 e1lineCodeHDB3 2 e1lineCodeAMI	.1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.5
ifCfgPortE1ClockSrc E1 clock source.	Enumerationr/w Enumerated Values: 1 e1ClockSrcLocal 2 e1ClockSrcLoop	.1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.6