NSCRTV-EPON-VLAN-MGM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
49

vlanGlobalInfoTable

table
.1.3.6.1.4.1.17409.2.3.7.1 · 1 row entry · 4 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk vlanGlobalInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-VLAN-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-VLAN-MGM-MIB::vlanGlobalInfoTable' 
ȫ??VLAN??Ϣ??
vlanGlobalInfoEntry row .1.3.6.1.4.1.17409.2.3.7.1.1
Indexes
Column Syntax OID
vlanDeviceIndex
?豸?????š?
For OLT, set to corresponding device ID
For ONU, set to 0
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.1.1.1
maxVlanId
???VLAN ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.1.1.2
maxSupportVlans
???֧?ֵ?VLAN????
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.1.1.3
createdVlanNumber
?Ѵ?????VLAN????
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.1.1.4

oltVlanConfigTable

table
.1.3.6.1.4.1.17409.2.3.7.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk oltVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-VLAN-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-VLAN-MGM-MIB::oltVlanConfigTable' 
OLT VLAN??Ա???ñ?
oltVlanConfigEntry row .1.3.6.1.4.1.17409.2.3.7.2.1.1
Indexes
Column Syntax OID
oltVlanIndex
Vlan??????
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.2.1.1.1
oltVlanDeviceIndex
OLT?豸?????š?
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.2.1.1.2
oltVlanName
OLT VLAN name
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.17409.2.3.7.2.1.1.3
taggedPort
Vlan??????tag??PON/SNI in OLT??
It is presented by member port list. Each member port is identified
by 4-byte format, same as TC of EponDeviceIndex. The actual length of
this string depends of the number of memb…
OctetStringr/w .1.3.6.1.4.1.17409.2.3.7.2.1.1.4
untaggedPort
Vlan??????Untag??PON/SNI in OLT??
It is presented by member port list. Each member port is identified
by 4-byte format, same as TC of EponDeviceIndex. The actual length of
this string depends of the number of me…
OctetStringr/w .1.3.6.1.4.1.17409.2.3.7.2.1.1.5
oltVlanRowStatus
??״̬
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17409.2.3.7.2.1.1.6

onuVlanConfigTable

table
.1.3.6.1.4.1.17409.2.3.7.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk onuVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-VLAN-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-VLAN-MGM-MIB::onuVlanConfigTable' 
ONU VLAN??Ա???ñ?
It is maintained by ONU itself.
onuVlanConfigEntry row .1.3.6.1.4.1.17409.2.3.7.2.2.1
Indexes
Column Syntax OID
onuVlanIndex
Vlan??????
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.2.2.1.1
onuVlanName
ONU VLAN name
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.17409.2.3.7.2.2.1.2
onuVlanTaggedPort
Vlan??????tag??UNI?˿ڡ?
It is presented by member port list. Each member port is identified
by 2-byte format, One for slot ID, the last for port ID. The actual
length of this string depends of the number of tagg…
OctetStringr/w .1.3.6.1.4.1.17409.2.3.7.2.2.1.3
onuVlanUntaggedPort
Vlan??????Untag??UNI?˿ڡ?
It is presented by member port list. Each member port is identified
by 2-byte format, One for slot ID, the last for port ID. The actual
length of this string depends of the number of un…
OctetStringr/w .1.3.6.1.4.1.17409.2.3.7.2.2.1.4
onuVlanRowStatus
??״̬
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17409.2.3.7.2.2.1.5

portVlanTable

table
.1.3.6.1.4.1.17409.2.3.7.3.1 · 1 row entry · 8 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk portVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-VLAN-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-VLAN-MGM-MIB::portVlanTable' 
?˿?Vlan??        
This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI.        
1. If the table is maintained in OLT device:
Applied Obj  - Descriptions of Index
------------------------------------------------------------------
OLT Pon Port - OnuNum of pvlanDeviceIndex shall be set to 0,
/OLT SNI     pvlanCardIndex, and pvlanPortIndex set to 0 indicates
         meaningless 
OLT onu ID   - Set pvlanDeviceIndex to corresponding ONU ID,
         pvlanCardIndex, and pvlanPortIndex set to 0 indicates
         meaningless        
ONU UNI    - Set pvlanDeviceIndex to corresponding ONU ID,
         pvlanCardIndex, and pvlanPortIndex set to the corresponding 
         value        
2. If the table is maintained in ONU device:
pvlanDeviceIndex shall be set to 0 to indicate meaningless.
pvlanCardIndex shall be set to corresponding slot.
pvlanPortIndex shall be set to corresponding port.
portVlanEntry row .1.3.6.1.4.1.17409.2.3.7.3.1.1
Indexes
Column Syntax OID
pvlanDeviceIndex
OLT/ONU?豸?????š?
NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Description:
Epon olt/onu?豸?????š?
ONU ID????ɣ?4?ֽڣ?????--?ͣ?
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the …
 .1.3.6.1.4.1.17409.2.3.7.3.1.1.1
pvlanCardIndex
?忨??????
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.7.3.1.1.2
pvlanPortIndex
pon?˿?/uni/sni?˿???????
NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.7.3.1.1.3
vlanTagTpid
??ǵ?Э???ʶ
It shall be presented in hexadecimal format. For example, 81 00
to indicate 0x8100
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.17409.2.3.7.3.1.1.4
vlanTagCfi
?????ʽָʾ??
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.7.3.1.1.5
vlanTagPriority
vlan???ȼ?
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.17409.2.3.7.3.1.1.6
vlanPVid
port Vlan ID
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.3.1.1.7
vlanMode
vlanģʽ
Enumerationr/w
Enumerated Values:
0transparent
1tag
2translation
3aggregation
4trunk
5stacking
 .1.3.6.1.4.1.17409.2.3.7.3.1.1.8

portVlanTranslationTable

table
.1.3.6.1.4.1.17409.2.3.7.3.2 · 1 row entry · 6 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk portVlanTranslationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-VLAN-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-VLAN-MGM-MIB::portVlanTranslationTable' 
?˿?Vlan?????
This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI.
1. If the table is maintained in OLT device:
Applied Obj  - Descriptions of Index
------------------------------------------------------------------
OLT Pon Port - OnuNum of pvtDeviceIndex shall be set to 0,
/OLT SNI     pvtCardIndex, and pvtPortIndex set to 0 indicates
         meaningless 
OLT onu ID   - Set pvtDeviceIndex to corresponding ONU ID,
         pvtCardIndex, and pvtPortIndex set to 0 indicates
         meaningless        
ONU UNI    - Set pvtDeviceIndex to corresponding ONU ID,
         pvtCardIndex, and pvtPortIndex set to the corresponding 
         value
          
2. If the table is maintained in ONU device:
pvtDeviceIndex shall be set to 0 to indicate meaningless.
pvtCardIndex shall be set to corresponding slot.
pvtPortIndex shall be set to corresponding port.
portVlanTranslationEntry row .1.3.6.1.4.1.17409.2.3.7.3.2.1
Indexes
Column Syntax OID
pvtDeviceIndex
OLT/ONU?豸?????š?
NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Description:
Epon olt/onu?豸?????š?
ONU ID????ɣ?4?ֽڣ?????--?ͣ?
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the …
 .1.3.6.1.4.1.17409.2.3.7.3.2.1.1
pvtCardIndex
?忨??????
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.7.3.2.1.2
pvtPortIndex
pon?˿?/ONU/uni?˿???????/sni?˿?
NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.7.3.2.1.3
portVidIndex
?˿?ԭʼVLAN ID??????
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17409.2.3.7.3.2.1.4
translationNewVid
???????vlan??
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17409.2.3.7.3.2.1.5
translationRowStatus
??״̬
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17409.2.3.7.3.2.1.6

portVlanAggregationConfigTable

table
.1.3.6.1.4.1.17409.2.3.7.3.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk portVlanAggregationConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-VLAN-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-VLAN-MGM-MIB::portVlanAggregationConfigTable' 
?˿?Vlan?ۺ????ñ?
This table applies on OLT pon port, OLT onu ID, ONU UNI.
1. If the table is maintained in OLT device:
Applied Obj  - Descriptions of Index
------------------------------------------------------------------
OLT Pon Port - OnuNum of pvaDeviceIndex shall be set to 0,
         pvaCardIndex, and pvaPortIndex set to 0 indicates
         meaningless 
OLT onu ID   - Set pvaDeviceIndex to corresponding ONU ID,
         pvaCardIndex, and pvaPortIndex set to 0 indicates
         meaningless        
ONU UNI    - Set pvaDeviceIndex to corresponding ONU ID,
         pvaCardIndex, and pvaPortIndex set to the corresponding 
         value
          
2. If the table is maintained in ONU device:
pvaDeviceIndex shall be set to 0 to indicate meaningless.
pvaCardIndex shall be set to corresponding slot.
pvaPortIndex shall be set to corresponding port.
portVlanAggregationConfigEntry row .1.3.6.1.4.1.17409.2.3.7.3.3.1.1
Indexes
Column Syntax OID
pvaDeviceIndex
OLT/ONU?豸?????š?
NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Description:
Epon olt/onu?豸?????š?
ONU ID????ɣ?4?ֽڣ?????--?ͣ?
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the …
 .1.3.6.1.4.1.17409.2.3.7.3.3.1.1.1
pvaCardIndex
?忨??????
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.7.3.3.1.1.2
pvaPortIndex
pon?˿?/uni?˿???????/ONU ID
NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.7.3.3.1.1.3
portAggregationVidIndex
?˿?VLAN?ۺ???VLAN??
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17409.2.3.7.3.3.1.1.4
aggregationVidList
?ۺϵ?vlan ID??
????????INTERNET????˳?�????ҵ?OCTET?ֱ?ΪOCTET 0, OCTET 1, ...
ÿ??OCTET??bit?????ҷֱ?Ϊbit0??bit1??...??bit7??
????bit??OCTET??С?????˳??ÿ??bit??Ӧ??һ??VLAN??VLAN ID??ΧΪ0..4095??
??һ??bit??ӦVLAN 0,???һ??bit??ӦVLA…
OctetStringr/w
Constraints:
range: 512-512
 .1.3.6.1.4.1.17409.2.3.7.3.3.1.1.5
aggregationRowStatus
??״̬
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17409.2.3.7.3.3.1.1.6

portVlanTrunkTable

table
.1.3.6.1.4.1.17409.2.3.7.3.4 · 1 row entry · 5 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk portVlanTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-VLAN-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-VLAN-MGM-MIB::portVlanTrunkTable' 
?˿?Vlan trunk????VLAN Trunk???
This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI.
1. If the table is maintained in OLT device:
Applied Obj  - Descriptions of Index
------------------------------------------------------------------
OLT Pon Port - OnuNum of pvtDeviceIndex shall be set to 0,
/OLT SNI     pvtCardIndex, and pvtPortIndex set to 0 indicates
         meaningless 
OLT onu ID   - Set pvtDeviceIndex to corresponding ONU ID,
         pvtCardIndex, and pvtPortIndex set to 0 indicates
         meaningless        
ONU UNI    - Set pvtDeviceIndex to corresponding ONU ID,
         pvtCardIndex, and pvtPortIndex set to the corresponding 
         value
          
2. If the table is maintained in ONU device:
pvtDeviceIndex shall be set to 0 to indicate meaningless.
pvtCardIndex shall be set to corresponding slot.
pvtPortIndex shall be set to corresponding port.
portVlanTrunkEntry row .1.3.6.1.4.1.17409.2.3.7.3.4.1
Indexes
Column Syntax OID
trunkDeviceIndex
?豸?????š?
NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Description:
Epon olt/onu?豸?????š?
ONU ID????ɣ?4?ֽڣ?????--?ͣ?
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the …
 .1.3.6.1.4.1.17409.2.3.7.3.4.1.1
trunkCardIndex
?忨??????
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.7.3.4.1.2
trunkPortIndex
?˿???????
NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.7.3.4.1.3
trunkVidList
Trunked Vlan List for the port
????????INTERNET????˳?�????ҵ?OCTET?ֱ?ΪOCTET 0, OCTET 1, ...
ÿ??OCTET??bit?????ҷֱ?Ϊbit0??bit1??...??bit7??
????bit??OCTET??С?????˳??ÿ??bit??Ӧ??һ??VLAN??VLAN ID??ΧΪ0..4095??
??һ??bit??ӦVLAN …
OctetStringr/w
Constraints:
range: 512-512
 .1.3.6.1.4.1.17409.2.3.7.3.4.1.4
portVlanTrunkRowStatus
??״̬
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17409.2.3.7.3.4.1.5

portQinQConfigTable

table
.1.3.6.1.4.1.17409.2.3.7.4.1 · 1 row entry · 9 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk portQinQConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-VLAN-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-VLAN-MGM-MIB::portQinQConfigTable' 
QinQ???????Ա?
This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI.
1. If the table is maintained in OLT device:
Applied Obj  - Descriptions of Index
------------------------------------------------------------------
OLT Pon Port - OnuNum of pqDeviceIndex shall be set to 0,
/OLT SNI     pqCardIndex, and pqPortIndex set to 0 indicates
         meaningless 
OLT onu ID   - Set pqDeviceIndex to corresponding ONU ID,
         pqCardIndex, and pqPortIndex set to 0 indicates
         meaningless        
ONU UNI    - Set pqDeviceIndex to corresponding ONU ID,
           pqCardIndex, and pqPortIndex set to the corresponding 
           value
             
2. If the table is maintained in ONU device:
pqDeviceIndex shall be set to 0 to indicate meaningless.
pqCardIndex shall be set to corresponding slot.
pqPortIndex shall be set to corresponding port.
portQinQConfigEntry row .1.3.6.1.4.1.17409.2.3.7.4.1.1
Indexes
Column Syntax OID
pqDeviceIndex
ONU ID, for a specific ONU
NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Description:
Epon olt/onu?豸?????š?
ONU ID????ɣ?4?ֽڣ?????--?ͣ?
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the …
 .1.3.6.1.4.1.17409.2.3.7.4.1.1.1
pqCardIndex
?忨??????
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.7.4.1.1.2
pqPortIndex
?˿???????
NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.7.4.1.1.3
pqStartVlanId
The starting VLAN ID, working together with pqEndVlanId,
consists of a VLAN group. The VLAN ID match the VLAN group
will be QinQed with specified outer VLAN
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.4.1.1.4
pqEndVlanId
The ending VLAN ID, working together with pqStartVlanId,
consists of a VLAN range. The VLAN ID match the VLAN range
will be QinQed with specified outer VLAN
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.4.1.1.5
pqSVlanId
The outer VLAN id to be QinQed
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.7.4.1.1.6
pqSTagCosDetermine
What STAG COS will be set for this QinQ instance. It could
be either a new definition or copied from CTAG
Enumerationr/w
Enumerated Values:
1redefine
2copyFromCTag
 .1.3.6.1.4.1.17409.2.3.7.4.1.1.7
pqSTagCosNewValue
The new STAG COS value if pqSTagCosDetermine is selected as
redefine(1)
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.17409.2.3.7.4.1.1.8
pqRowStatus
 SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17409.2.3.7.4.1.1.9