NOKIA-HWM-MIB Table View

A table which contains an entry for each pluggable circuit board
(in this MIB a 'unit' is the same as a pluggable circuit board.)
Entries of this table are automatically created by the hardware
management software.

ntcHWUnitEntry row .1.3.6.1.4.1.94.1.16.7.1.1.1.1

A conceptual row in the ntcHWUnitTable. Rows are created
automatically by the Hardware Management software.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
ntcHWAdminState Represents the desired state of the unit. inService indicates that the unit is intended to be operating normally. outOfService indicates that the unit should be taken out of normal operating mode and no data traffic s…	Enumerationr/w Enumerated Values: 1 inService 2 outOfService 3 inTest 4 missing	.1.3.6.1.4.1.94.1.16.7.1.1.1.1.1
ntcHWOperState Indicates the current state of the unit. down indicates that the unit is in a non-functional state. up indicates that the unit is functioning normally.	Enumeration Enumerated Values: 1 down 2 up	.1.3.6.1.4.1.94.1.16.7.1.1.1.1.2
ntcHWAvailabilityStatus Provides more specific information on the state of the unit in this conceptual row. The status column has eleven defined values: inCharge = the unit is fully operational and ready to perform its desired tasks…	Enumeration Enumerated Values: 1 inCharge 2 applicationStarting 3 applicationShutdown 4 platformStarting 5 resetting 6 separated 7 unconfigured 8 testing 9 standby 10 dormant 11 unavailable	.1.3.6.1.4.1.94.1.16.7.1.1.1.1.3
ntcHWRestart Provides the ability to reset or perform a hot restart the unit represented by this conceptual row. reset = the Unit is shutdown in an orderly manner and restarted again via hardware reset; hotRestart = onl…	Enumerationr/w Enumerated Values: 1 reset 2 hotRestart 3 detach	.1.3.6.1.4.1.94.1.16.7.1.1.1.1.4
ntcHWLedState Indicates the current LED color of the unit represented by this conceptual row.	Enumeration Enumerated Values: 1 red 2 yellow 3 black 4 green	.1.3.6.1.4.1.94.1.16.7.1.1.1.1.5
ntcHWSerialNumber The units serial number in displayable format.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.94.1.16.7.1.1.1.1.6
ntcHWProductionDate The units production date in displayable format.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.94.1.16.7.1.1.1.1.7
ntcHWUnitEntryChanged Represents the value of sysUpTime at the instant that this conceptual row entry has changed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.94.1.16.7.1.1.1.1.8

Table whose entries represent the expected circuit board
type.  The entries are created automatically by the hardware
management software.

ntcHWSlotEntry row .1.3.6.1.4.1.94.1.16.7.1.1.2.1

The logical row describing the expected circiut board type of a
slot.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
ntcHWDesiredUnitType The unit type which is expected to be inserted or present in the current slot. An indication of the vendor-specific hardware type of the HWM entity. Note that this is different from the definition of MIB-II's sysObjectI…	SNMPv2-TCAutonomousTyper/w Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.94.1.16.7.1.1.2.1.2