NMS-EPON-ONU-SERIAL-PORT Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
17

nmsEponOnuSerialPortTable

table mandatory
.1.3.6.1.4.1.3320.101.27.1 · 1 row entry · 17 columns
Open in standard view
Uses the bdcom variant from /opt/observium/mibs/bdcom.
Command help
Walk nmsEponOnuSerialPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NMS-EPON-ONU-SERIAL-PORT' -M '/opt/observium/mibs/bdcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NMS-EPON-ONU-SERIAL-PORT::nmsEponOnuSerialPortTable' 
A list of epon ONU serial port table entries.
nmsEponOnuSerialPortEntry row .1.3.6.1.4.1.3320.101.27.1.1
A collection of additional objects in the
epon ONU serial port table.
Indexes
Column Syntax OID
llidIfIndexmandatory
LLID interface id, unique in system. The same value as NMS-EPON-LLID mib index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3320.101.27.1.1.1
onuSerialPortSeqNomandatory
ONU serial port sequence number, unique in one ONU.
Integer32
Constraints:
range: 224-239
 .1.3.6.1.4.1.3320.101.27.1.1.2
onuSerialPortSpeedmandatory
ONU serial port speed. Default value is 9600.
Integer32r/w
Constraints:
range: 300-115200
 .1.3.6.1.4.1.3320.101.27.1.1.3
onuSerialPortDataBitsmandatory
ONU serial port data bits. Default value is 8.
Integer32r/w
Constraints:
range: 5-8
 .1.3.6.1.4.1.3320.101.27.1.1.4
onuSerialPortHaltBitsmandatory
ONU serial port halt bits. Default value is 1.
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.3320.101.27.1.1.5
onuSerialPortParitymandatory
ONU serial port parity. Default value is 0-none.
Enumerationr/w
Enumerated Values:
0none
1odd
2even
 .1.3.6.1.4.1.3320.101.27.1.1.6
onuSerialPortFlowControlmandatory
ONU serial port parity. Default value is 0-none.
Enumerationr/w
Enumerated Values:
0none
1software
2hardware
 .1.3.6.1.4.1.3320.101.27.1.1.7
onuSerialPortPropRowStatusmandatory
ONU serial port properties row status.These five item are set together: onuSerialPortSpeed, onuSerialPortDataBits, onuSerialPortHaltBits, onuSerialPortParity, onuSerialPortFlowControl.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3320.101.27.1.1.8
onuSerialPortDataReadIntervalmandatory
ONU serial port buffer data read interval. Unit is mili-second, and default value is 100 ms.
Integer32r/w
Constraints:
range: 10-100000
 .1.3.6.1.4.1.3320.101.27.1.1.9
onuSerialPortDataReadBytesmandatory
ONU serial port buffer data read bytes. When storage is up to limit, the bytes must be sent out. Default value is 100.
Integer32r/w
Constraints:
range: 10-1000
 .1.3.6.1.4.1.3320.101.27.1.1.10
onuSerialPortBufferRowStatusmandatory
ONU serial port buffer setting row status.These two item are set together: onuSerialPortDataReadInterval, onuSerialPortDataReadBytes.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3320.101.27.1.1.11
onuSerialPortKeepaliveModemandatory
ONU serial port keepalive mode. 0-disable, 1-enable.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.3320.101.27.1.1.12
onuSerialPortKeepaliveIdlemandatory
ONU serial port keepalive idle. if there is no r/x package in time of onuSerialPortKeepaliveIdle, system will send keepalive package to probe. Unit is second, and default value is 100 s.
Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.3320.101.27.1.1.13
onuSerialPortKeepaliveTimeoutmandatory
ONU serial port keepalive timeout. if there is no r/x package in time of onuSerialPortKeepaliveIdle, system will send keepalive package to probe. And if there is no rsponse package in onuSerialPortKeepaliveTimeout, this…
Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.3320.101.27.1.1.14
onuSerialPortKeepaliveProbeCountmandatory
ONU serial port keepalive probing package sending count. Default value is 3.
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.3320.101.27.1.1.15
onuSerialPortKeepaliveRowStatusmandatory
ONU serial port keepalive setting value row status. These three items are set together: onuSerialPortKeepaliveIdle, onuSerialPortKeepaliveTimeout, onuSerialPortKeepaliveProbeCount.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3320.101.27.1.1.16
onuSerialPortLoopbackmandatory
ONU serial port loopback test.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3320.101.27.1.1.17