NGPON-MIB Table View

inactive vlan table.

inactiveVlanEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1

entry of inactive vlan table

Indexes

inactiveVlanIndex inactiveVlanSubIndex

Column	Syntax	OID
inactiveVlanIndex The index of inactive vlan table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.1
inactiveVlanSubIndex The 2nd index of inactive vlan table, should be inputted with <1-32>.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.2
inactiveVlanAction inactiveVlanAction: 0 NULL 1 translate 2 add 3 add default	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.3
inactiveVlanOldVid old vid, or inner vid, should in <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.4
inactiveVlanOldPriority old priority, or inner priority, should in <0-7>.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.5
inactiveVlanNewVid new vid, or outer vid, or default vid, should in <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.6
inactiveVlanNewPriority new priority, or outer priority, or default priority, should in <0-7>.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.7
inactiveVlanRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.8

inactive us traffic table.

inactiveUsTrafficEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1

entry of inactive us traffic table

Indexes

inactiveUsTrafficIndex

Column	Syntax	OID
inactiveUsTrafficIndex The index of inactive us traffic table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.1
inactiveUsTrafficName us traffic name, max length: 128.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.2
inactiveUsTrafficPq The gemport priority queue, should be inputted with <0-7>.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.3
inactiveUsTrafficCir The gemport committed infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps.	Integer32r/w Constraints: range: 64-1310720	.1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.4
inactiveUsTrafficPir The gemport peek infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps.	Integer32r/w Constraints: range: 64-1310720	.1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.5
inactiveUsTrafficCbs The gemport committed burst size, should be inputted with <2000-10240000>.	Integer32r/w Constraints: range: 2000-1310720	.1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.6
inactiveUsTrafficPbs The gemport peek burst size, should be inputted with <2000-10240000>.	Integer32r/w Constraints: range: 2000-1310720	.1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.7
inactiveUsTrafficRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.8

inactive ds traffic table.

inactiveDsTrafficEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1

entry of inactive ds traffic table

Indexes

inactiveDsTrafficIndex

Column	Syntax	OID
inactiveDsTrafficIndex The index of inactive ds traffic table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.1
inactiveDsTrafficName ds traffic name, max length: 128.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.2
inactiveDsTrafficRate The gemport ds bandwidth rate, should be inputted with <0-1677215>.	Integer32r/w Constraints: range: 0-1677215	.1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.3
inactiveDsTrafficBurst The gemport ds burst size, should be inputted with <0-1677215>.	Integer32r/w Constraints: range: 0-1677215	.1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.4
inactiveDsTrafficRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.5

inactive vlan primary table.

inactiveVlanPrimaryEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.1.4.1

entry of inactive vlan primary table

Indexes

inactiveVlanPriIndex

Column	Syntax	OID
inactiveVlanPriIndex The index of inactive vlan table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.1.4.1.1
inactiveVlanPriName name of inactive vlan entry.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.1.4.1.2
inactiveVlanPriRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.1.4.1.3

inactive domain dba table

inactiveDbaEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.2.1

entry of inactive dba table

Indexes

inactiveDbaIndex

Column	Syntax	OID
inactiveDbaIndex The index of inactive dba table, should be inputted with <0-127>.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.2.2.1.1
inactiveDbaName inactive dba name, max length: 128.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.2.1.2
inactiveDbaType inactiveDbaType, 1 fixed bandwidth 2 assured bandwidth 3 assured and max bandwidth 4 max bandwidth 5 fixed and assured and max bandwidth	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.13464.1.14.1.1.2.2.1.3
inactiveDbaFixBandwidth Must to be divisible by 64kbps, must not less than 128 kbps.	Integer32r/w Constraints: range: 128-1310720	.1.3.6.1.4.1.13464.1.14.1.1.2.2.1.4
inactiveDbaAssuredBandwidth Must to be divisible by 64kbps, Can be 0. If not 0, it must be at least 256 kbps.	Integer32r/w Constraints: range: 0-1310592	.1.3.6.1.4.1.13464.1.14.1.1.2.2.1.5
inactiveDbaMaxBandwidth Must to be divisible by 64kbps, and must not be less than the sum of assured BW plus fixedBW. Must less than 1310720 kbps	Integer32r/w Constraints: range: 0-1310720	.1.3.6.1.4.1.13464.1.14.1.1.2.2.1.6
inactiveDbaRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.2.1.7

inactive domain line primary table

inactiveLinePrimaryEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1

entry of inactive line primary table

Indexes

inactiveLineIndex

Column	Syntax	OID
inactiveLineIndex The index of line primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.1
inactiveLineDeviceType inactiveLineDeviceType: x30-420 4ETH+2POTS SFU t10-100 1ETH SFU t10-420 4ETH+2POTS SFU t10-214 2ETH(1ETH+1iTV)+1POTS SFU t10-423 4ETH+2POTS+WIFI+USB HGU t10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU t10-403 4…	OctetStringr/w Constraints: range: 7-16	.1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.2
inactiveLineName line name, max length: 128.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.3
inactiveLineTrafficMode inactiveLineTrafficMode: 0 pri-queue: priority queue scheduling 1 gem-car: GEM traffic control	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.4
inactiveLineMappingMode inactiveLineMappingMode: 0 vlan 1 priority 2 vlan-priority 3 port 4 port-vlan 5 port-priority 6 port-vlan-priority	Integer32r/w Constraints: range: 0-6	.1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.5
inactiveLineRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.6
inactiveLineFecSwitch inactiveLineFecSwitch: 0 false (default) 1 true	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.7

inactive domain line tcont table, now only for tcont bind dba.

inactiveLineTcontEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1

entry of inactive line tcont table

Indexes

inactiveLineIndexI inactiveLineTcontIndex

Column	Syntax	OID
inactiveLineIndexI The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1.1
inactiveLineTcontIndex The index of tcont, the 2nd index of this table. Should in <1-8>.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1.2
inactiveLineTcontDbaIndex The index of tcont bind dba, should be inputted with <0-127>.	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1.3
inactiveLineTcontRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1.4

inactive domain line gemport table.

inactiveLineGemportEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1

entry of inactive line gemport table

Indexes

inactiveLineIndexII inactiveLineGemportIndex

Column	Syntax	OID
inactiveLineIndexII The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.1
inactiveLineGemportIndex The index of gemport, the 2nd index of this table. Should in <1-24>.	Integer32 Constraints: range: 1-24	.1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.2
inactiveLineGemportTcontId The gemport bind tcont index, should be inputted with <1-8>.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.3
inactiveLineGemportVlanProfileId The gemport vlan profile id, should be inputted with <0-4095>.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.4
inactiveLineGemportUsProfileId The gemport us traffic profile id, should be inputted with <0-4095>.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.5
inactiveLineGemportDsProfileId The gemport ds traffic profile id, should be inputted with <0-4095>.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.6
inactiveLineGemportRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.7

inactive domain line flow mapping table.

inactiveLineFlowmappingEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1

entry of inactive line flow mapping table

Indexes

inactiveLineIndexIII inactiveLineFlowmappingIndex

Column	Syntax	OID
inactiveLineIndexIII The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.1
inactiveLineFlowmappingIndex The index of flowmapping, the 2nd index of this table. Should in <1-48>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-47	.1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.2
inactiveLineFlowmappingVid The flow mapping vid, should be inputted with <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.3
inactiveLineFlowmappingPriority The flow mapping priority, should be inputted with <0-8>. default value 8 means don't care 802.1p priority.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.4
inactiveLineFlowmappingEthport The flow mapping ethernet port id, should be inputted with <1-8>.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.5
inactiveLineFlowmappingGemport The flow mapping gem port id, should be inputted with <1-24>.	Integer32r/w Constraints: range: 1-24	.1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.6
inactiveLineFlowmappingType inactiveLineFlowmappingType: 0 flowmapping not base port. 1 flowmapping base eth port. 2 flowmapping base veip port. 3. flowmapping base iphost port.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.7
inactiveLineFlowmappingRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.8

inactive domain line attribute management table.

inactiveLineAttrMgmtEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1

entry of inactive line attribute management table

Indexes

inactiveLineIndexIV inactiveLineAttrMgmtIndex

Column	Syntax	OID
inactiveLineIndexIV The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.1
inactiveLineAttrMgmtIndex The index of attribute management, the 2nd index of this table. Should in <1-64>.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.2
inactiveLineAttrMgmtNportType inactiveLineAttrMgmtNportType: 1 eth port in sfu 2 veip port in hgu 3 iphost virtual port, for voip, tdm, etc.	Integer32r/w Constraints: range: 1-3	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.3
inactiveLineAttrMgmtNport The port of attribute management, if eport, should in <1-8>.	Integer32r/w Constraints: range: 1-64	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.4
inactiveLineAttrMgmtEtypeFilter inactiveLineAttrMgmtEtypeFilter: 0 no filter 1 filter ipoe frame 2 filter pppoe frame 3 filter arp frame	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.5
inactiveLineAttrMgmtVlanMode inactiveLineAttrMgmtVlanMode: 0 transparent 1 tag 2 translation 3 trunk 4 QinQ	Integer32r/w Constraints: range: 0-4	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.6
inactiveLineAttrMgmtCvlanVid cvlan vid, should be inputted with <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.7
inactiveLineAttrMgmtCvlanPri The cvlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.8
inactiveLineAttrMgmtSvlanVid svlan vid, should be inputted with <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.9
inactiveLineAttrMgmtSvlanPri svlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.10
inactiveLineAttrMgmtRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.11

inactive domain line catv port management table.

inactiveLineCportEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1

entry of inactive line catv port management table

Indexes

inactiveLineIndexX inactiveLineCportIndex

Column	Syntax	OID
inactiveLineIndexX The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.1
inactiveLineCportIndex The index of catv port management, the 2nd index of this table. Should in <1-4>.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.2
inactiveLineCportSwitch inactiveLineCportSwitch: 0 disable 1 enable(default)	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.3
inactiveLineCportAgcMode inactiveLineCportAgcMode: 0 No AGC 1 Broadband RF AGC 2 Optical AGC	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.4
inactiveLineCportAgcRange catv port agc range, default: 0.	Integer32r/w Constraints: range: -120-60	.1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.5

inactive line alarm Reference table.

inactiveLineAlarmRefEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1

entry of inactive line alarm Reference table

Indexes

inactiveLineAlarmRefLIndex

Column	Syntax	OID
inactiveLineAlarmRefLIndex The line index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1.1
inactiveLineAlarmRefAIndex The index of alarm table to reference, Should in <0-127>.	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1.2
inactiveLineAlarmRefAName The entry name of alarm table to reference, Should in <1-128>.	OctetStringr/w Constraints: range: 1-128	.1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1.3
inactiveLineAlarmRefRowStatus The row status of inactive line alarm Reference table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1.4

inactive domain line SFU primary table.

inactiveLineSFUEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.4.1.1

entry of inactive line sfu primary table

Indexes

inactiveLineIndexV

Column	Syntax	OID
inactiveLineIndexV The 1st index of this table, should be inputted with <0-4095>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.14.1.1.2.4.1.1.1
inactiveLineSfuLocalSwitch inactiveLineSfuLocalSwitch: 0 disable(default) 1 enable.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.4.1.1.2
inactiveLineSfuLoopDetectSwitch inactiveLineSfuLoopDetectSwitch: 0 disable(default) 1 enable.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.4.1.1.3

inactive domain line SFU ethernet port table.

inactiveLineSFUEthportEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1

entry of inactive line SFU ethernet port table

Indexes

inactiveLineIndexVI inactiveLineSfuEthportIndex

Column	Syntax	OID
inactiveLineIndexVI The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.1
inactiveLineSfuEthportIndex The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.2
inactiveLineSfuEthportSwitch inactiveLineSfuEthportSwitch: 0 no shutdown(default) 1 shutdown	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.3
inactiveLineSfuEthportFlowCtrlSwitch inactiveLineSfuEthportFlowCtrlSwitch: 0 disable(default) 1 enable	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.4
inactiveLineSfuEthportLoopbackSwitch inactiveLineSfuEthportLoopbackSwitch: 0 disable(default) 1 enable	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.5
inactiveLineSfuEthportFastLeaveSwitch inactiveLineSfuEthportFastLeaveSwitch: 0 disable(default) 1 enable	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.6
inactiveLineSfuEthportMaxGroups The SFU ethernet port max igmp groups, should be inputted with <1-128>.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.7
inactiveLineSfuEthportMaxMacCount The SFU ethernet port max mac address count, should be inputted with <1-255>.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.8
inactiveLineSfuEthportMcastMode inactiveLineSfuEthportMcastMode(some ont not support): 0 control 1 igmp snooping 2 unconcern(default)	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.9
inactiveLineSfuEthportDsIgmpControlType inactiveLineSfuEthportDsIgmpControlType: 0 transparent(default, only for read) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid	Integer32r/w Constraints: range: 0-5	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.10
inactiveLineSfuEthportDsIgmpVid The SFU ethernet port downstream igmp and multicast control vid, should be inputted with <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.11
inactiveLineSfuEthportDsIgmpPri The vlan priority, should be inputted with <0-7>.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.12
inactiveLineSfuEthportDsIgmpRowStatus RowStatus for ethport ds igmp tag control.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.13
inactiveLineSfuEthportUsIgmpControlType inactiveLineSfuEthportUsIgmpControlType: 0 transparent(default, only for read) 1 add tag 2 replace tag 3 replace only vid 4 add only vid	Integer32r/w Constraints: range: 0-4	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.14
inactiveLineSfuEthportUsIgmpVid The SFU ethernet port upstream igmp and multicast control vid, should be inputted with <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.15
inactiveLineSfuEthportUsIgmpPri The vlan priority, should be inputted with <0-7>.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.16
inactiveLineSfuEthportUsIgmpRowStatus RowStatus for ethport us igmp tag control.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.17
inactiveLineSfuEthportBwCir The SFU ethernet port bandwidth egress cir, should be inputted with <64-1024000>.	Integer32r/w Constraints: range: 64-1024000	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.18
inactiveLineSfuEthportBwCbs The SFU ethernet port bandwidth egress cbs, should be inputted with <2-32000>.	Integer32r/w Constraints: range: 2-32000	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.19
inactiveLineSfuEthportBwPir The SFU ethernet port bandwidth egress pir, should be inputted with <64-1024000>.	Integer32r/w Constraints: range: 64-1024000	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.20
inactiveLineSfuEthportBwPbs The SFU ethernet port bandwidth egress pbs, should be inputted with <2-32000>.	Integer32r/w Constraints: range: 2-32000	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.21
inactiveLineSfuEthportBwRowStatus RowStatus for ethernet port bandwidth egress.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.22

inactive domain line HGU table.

inactiveLineHGUEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1

entry of inactive line HGU table

Indexes

inactiveLineIndexVIII

Column	Syntax	OID
inactiveLineIndexVIII The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.1
inactiveLineHguSwitch inactiveLineHguSwitch: 0 no shutdown(default) 1 shutdown	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.2
inactiveLineHguFastLeaveSwitch inactiveLineHguFlowCtrlSwitch: 0 disable(default) 1 enable	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.3
inactiveLineHguMaxGroups The HGU max igmp groups, should be inputted with <1-128>.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.4
inactiveLineHguMaxMacCount The HGU max mac address count, should be inputted with <1-255>.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.5
inactiveLineHguMcastMode inactiveLineHguMcastMode(some ont not support): 0 control 1 igmp snooping 2 unconcern(default)	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.6
inactiveLineHguDsIgmpControlType inactiveLineHguDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid	Integer32r/w Constraints: range: 0-5	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.7
inactiveLineHguDsIgmpVid The HGU downstream igmp and multicast control vid, should be inputted with <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.8
inactiveLineHguDsIgmpPri The vlan priority, should be inputted with <0-7>.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.9
inactiveLineHguDsIgmpRowStatus RowStatus for ds igmp tag control.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.10
inactiveLineHguUsIgmpControlType inactiveLineHguUsIgmpControlType: 0 transparent(default) 1 add tag 2 replace tag 3 replace only vid 4 add only vid	Integer32r/w Constraints: range: 0-4	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.11
inactiveLineHguUsIgmpVid The HGU upstream igmp and multicast control vid, should be inputted with <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.12
inactiveLineHguUsIgmpPri The vlan priority, should be inputted with <0-7>.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.13
inactiveLineHguUsIgmpRowStatus RowStatus for us igmp tag control.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.14
inactiveLineHguMcastEportSwitch inactiveLineHguMcastEportSwitch: 0 disable Hgu ctrl mcast base on eport(default) 1 enable Hgu ctrl mcast base on eport	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.15

inactive domain rule table

inactiveRuleEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.6.1

entry of inactive rule table

Indexes

inactiveRuleIndex

Column	Syntax	OID
inactiveRuleIndex The index of rule table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.1
inactiveRuleName rule description, max length: 128.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.2
inactiveRuleAction inactiveRuleAction: 0 permit 1 deny	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.3
inactiveRuleAuthMode inactiveRuleAuthMode: 0 auth mode sn 1 auth mode pw 2 auth mode sn_pw 3 auth mode loid 4 auth mode lopw 5 auth mode loid_lopw	Integer32r/w Constraints: range: 0-5	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.4
inactiveRuleAuthSn auth sn, mix(string-hex) format or hex format. length: mix: 13 hex: 16 you can use '*' represents any one character or hexadecimal number.	OctetStringr/w Constraints: range: 13-16	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.5
inactiveRuleAuthPw auth password, string format or hex format. max length: string: 10 hex: 20 you can use '*' represents any one character or hexadecimal number	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.6
inactiveRuleAuthLoid auth loid, string format, max length: 24. you can use '*' represents any one character or hexadecimal number	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.7
inactiveRuleAuthLopw auth logic password, string format, max length: 12. you can use '*' represents any one character or hexadecimal number	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.8
inactiveRuleAssignedSlot slot id pre assigned. if not configed, its '-'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.9
inactiveRuleAssignedPport pon port id pre assigned. if not configed, its '-'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.10
inactiveRuleAssignedOnt ont id pre assigned. if not configed, its '-'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.11
inactiveRuleLineIndexesStr String joined by rule bind line indexes, such as '12,56,1023'. A rule can at most bind 8 line models.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.12
inactiveRuleDefaultLine The index of rule default line, should be inputted with <1-4096> The range is not always fit, please see range in commands.	Integer32r/w Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.13
inactiveRuleRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.14
inactiveRuleOnceOnSwitch inactiveUniqueOnceOnSwitch: 0 always on(default) 1 once on.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.15
inactiveRuleOnceOnAgingTime aging time, hour, default value 0, means don't care aging time.	Integer32r/w Constraints: range: 0-168	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.16
inactiveRuleAuthSnFmt Serial number format, mixed or hexadecimal.	Enumerationr/w Enumerated Values: 0 mix 1 hex	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.17
inactiveRuleAuthPwFmt Password format, string or hexadecimal.	Enumerationr/w Enumerated Values: 0 string 1 hex	.1.3.6.1.4.1.13464.1.14.1.1.2.6.1.18

inactive domain unique primary table

inactiveUniquePrimaryEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1

entry of inactive unique primary table

Indexes

inactiveUniqueIndex

Column	Syntax	OID
inactiveUniqueIndex The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.1
inactiveUniqueName unique name, max length: 128.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.2
inactiveUniqueSignFlag inactiveUniqueSignFlag: 1 mode sn 2 mode loid 3 mode slot-id/pport-id/ont-id.	Integer32r/w Constraints: range: 1-3	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.3
inactiveUniqueSn unique sn, now only support string-hex format, not support hex format, max length: 13.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.4
inactiveUniqueLoid unique loid, now only support string format, max length: 24.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.5
inactiveUniqueSlotId slot id.	Integer32r/w Constraints: range: 0-0	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.6
inactiveUniquePportId pon port id.	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.7
inactiveUniqueOntId ont id.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.8
inactiveUniqueOntDesc ont description, max length: 128.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.9
inactiveUniqueRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.10
inactiveUniqueOnceOnSwitch inactiveUniqueOnceOnSwitch: 0 always on(default) 1 once on.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.11
inactiveUniqueOnceOnAgingTime aging time, default value 0, means don't care aging time.	Integer32r/w Constraints: range: 0-168	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.12
inactiveUniqueRangingBalance ranging balance, default value 0, unit: m.	Integer32r/w Constraints: range: -10000-10000	.1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.13

inactive domain unique voip sip agent info table

inactiveUniqueSipAgentInfoEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1

entry of inactive unique voip sip agent info table

Indexes

inactiveUniqueIndexI

Column	Syntax	OID
inactiveUniqueIndexI The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.1
inactiveUniqueSipProxyServerIp voip sip agent info proxy server ip address.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.2
inactiveUniqueSipOutboundProxyIp voip sip agent info outbound proxy ip address.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.3
inactiveUniqueSipRegisterServerIp voip sip agent info register server ip address.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.4
inactiveUniqueSipAgentInfoPort voip sip agent info port.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.5
inactiveUniqueSipAgentInfoRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.6

inactive domain unique voip sip user ip address table

inactiveUniqueSipUserAddrEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1

entry of inactive unique voip sip user ip address table

Indexes

inactiveUniqueIndexII

Column	Syntax	OID
inactiveUniqueIndexII The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.1
inactiveUniqueSipuAddressIp voip sip user ip address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.2
inactiveUniqueSipuAddressMask voip sip user mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.3
inactiveUniqueSipuAddressVlan voip sip user vlan.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.4
inactiveUniqueSipuAddressPri voip sip user priroty.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.5
inactiveUniqueSipuAddressRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.6
inactiveUniqueSipuAddressGateway voip sip user gateway.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.7
inactiveUniqueSipuAddressMasterDns voip sip user master DNS.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.8
inactiveUniqueSipuAddressSlaveDns voip sip user slave DNS.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.9
inactiveUniqueSipuAddressHost voip sip user host.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.10
inactiveUniqueSipuAddressMode voip sip user mode. 0(default): static ip mode; 1: dhcp mode.	Enumerationr/w Enumerated Values: 0 static 1 dhcp	.1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.11

inactive domain unique voip sip user infomation table

inactiveUniqueSipUserInfoEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1

entry of unique voip sip user infomation table

Indexes

inactiveUniqueIndexIII inactiveUniqueSipuInfoIndex

Column	Syntax	OID
inactiveUniqueIndexIII The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.1
inactiveUniqueSipuInfoIndex The index of voip sip user info, the 2nd index of this table. Should in <1-2>.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.2
inactiveUniqueSipuInfoUserName voip sip user infomation user name, max length: 25.	OctetStringr/w Constraints: range: 0-25	.1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.3
inactiveUniqueSipuInfoPassword voip sip user infomation user name, max length: 25.	OctetStringr/w Constraints: range: 0-25	.1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.4
inactiveUniqueSipuInfoTelephone voip sip user infomation user name, max length: 25.	OctetStringr/w Constraints: range: 0-25	.1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.5
inactiveUniqueSipuInfoRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.6

inactive domain unique voip sip digit map table

inactiveUniqueSipDigitMapEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1

entry of inactive unique voip sip digit map table

Indexes

inactiveUniqueIndexIV inactiveUniqueSipdMapIndex

Column	Syntax	OID
inactiveUniqueIndexIV The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1.1
inactiveUniqueSipdMapIndex The index of voip digit map, the 2nd index of this table. Should in <1-10>.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1.2
inactiveUniqueSipdMapDialPlanToken voip sip digit map dial plan token, max length: 28.	OctetStringr/w Constraints: range: 0-28	.1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1.3
inactiveUniqueSipdMapRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1.4

inactive domain unique gemport table.

inactiveUniqueGemportEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1

entry of inactive unique gemport table

Indexes

inactiveUniqueIndexV inactiveUniqueGemportIndex

Column	Syntax	OID
inactiveUniqueIndexV The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.1
inactiveUniqueGemportIndex The index of gemport, the 2nd index of this table. Should in <1-24>.	Integer32 Constraints: range: 1-24	.1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.2
inactiveUniqueGemportVlanProfileId The gemport vlan profile id, should be inputted with <0-4095>.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.3
inactiveUniqueGemportUsProfileId The gemport us traffic profile id, should be inputted with <0-4095>.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.4
inactiveUniqueGemportDsProfileId The gemport ds traffic profile id, should be inputted with <0-4095>.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.5
inactiveUniqueGemportRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.6

inactive domain unique catv port management table.

inactiveUniqueCportEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1

entry of inactive unique catv port management table

Indexes

inactiveUniqueIndexVI inactiveUniqueCportIndex

Column	Syntax	OID
inactiveUniqueIndexVI The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.1
inactiveUniqueCportIndex The index of catv port management, the 2nd index of this table. Should in <1-4>.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.2
inactiveUniqueCportSwitch inactiveUniqueCportSwitch: 0 disable 1 enable(default)	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.3
inactiveUniqueCportAgcMode inactiveUniqueCportAgcMode: 0 No AGC 1 Broadband RF AGC 2 Optical AGC	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.4
inactiveUniqueCportAgcRange catv port agc range, default: 0.	Integer32r/w Constraints: range: -120-60	.1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.5

inactive domain unique ethernet port management table.

inactiveUniqueEportEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1

entry of inactive unique ethernet port management table

Indexes

inactiveUniqueIndexVII inactiveUniqueEportIndex

Column	Syntax	OID
inactiveUniqueIndexVII The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1.1
inactiveUniqueEportIndex The index of ethernet port management, the 2nd index of this table. Should in <1-8>.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1.2
inactiveUniqueEportSwitch inactiveUniqueEportSwitch: 0 enable(default) 1 disable	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1.3
inactiveUniqueEportNegMode neg mode contains duplex and speed. duplex: 0 auto, 1 full, 2 half speed: 0 auto, 1 10M, 2 100M, 3 1000M neg mode = duplex * 10 + speed. neg mode value 0 means auto duplex auto speed, value 11 means full duplex 10M, and…	Integer32r/w Constraints: range: 0-23	.1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1.4

inactive domain unique tcont table, now only for tcont bind dba.

inactiveUniqueTcontEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1

entry of inactive unique tcont table

Indexes

inactiveUniqueIndexVIII inactiveUniqueTcontIndex

Column	Syntax	OID
inactiveUniqueIndexVIII The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1.1
inactiveUniqueTcontIndex The index of tcont, the 2nd index of this table. Should in <1-8>.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1.2
inactiveUniqueTcontDbaIndex The index of tcont bind dba, should be inputted with <0-127>.	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1.3
inactiveUniqueTcontRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1.4

inactive unique alarm Reference table.

inactiveUniqueAlarmRefEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1

entry of inactive unique alarm Reference table

Indexes

inactiveUniqueAlarmRefUIndex

Column	Syntax	OID
inactiveUniqueAlarmRefUIndex The unique index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1.1
inactiveUniqueAlarmRefAIndex The index of alarm table to reference, Should in <0-127>.	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1.2
inactiveUniqueAlarmRefAName The entry name of alarm table to reference, Should in <1-128>.	OctetStringr/w Constraints: range: 1-128	.1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1.3
inactiveUniqueAlarmRefRowStatus The row status of inactive unique alarm Reference table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1.4

inactive unique management table.

inactiveUniqueManageEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.11.1

entry of inactive unique management table

Indexes

inactiveUniqueManageIndex

Column	Syntax	OID
inactiveUniqueManageIndex The unique index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.11.1.1
inactiveUniqueManageProtocolPort80 set protocol-port-80 disable mode discard or enable mode forward.	Enumerationr/w Enumerated Values: 0 disable_discard 1 disable_forward 2 enable_discard 3 enable_forward 4 init	.1.3.6.1.4.1.13464.1.14.1.1.2.7.11.1.2

inactive unique wan table.

inactiveUniqueWanEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1

entry of inactive unique wan table

Indexes

inactiveUniqueWanIndex inactiveUniqueWanNo

Column	Syntax	OID
inactiveUniqueWanIndex The unique index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.1
inactiveUniqueWanNo The unique index of this table, should be inputted with <1-4>.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.2
inactiveUniqueWanMode The unique wan mode of this table, should be inputted with <1-3>.	Enumerationr/w Enumerated Values: 1 pppoe 2 dhcp 3 static_ip	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.3
inactiveUniqueWanVlan The unique wan vlan of this table, should be inputted with <1-4094>. 0 - Initial value and cannot be set to this value. 1..4094 - Valid Settings.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.4
inactiveUniqueWanPriority The unique wan vlan priority of this table, should be inputted with <0-7>. 0..7 - Valid Settings. 8 - Initial value and cannot be set to this value.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.5
inactiveUniqueWanPppoeUsername The unique wan pppoe mode user name of this table. 0 - Initial len and cannot be set to this len. 1..128 - Valid Settings.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.6
inactiveUniqueWanPppoePassword The unique wan pppoe mode password of this table. 0 - Initial len and cannot be set to this len. 1..25 - Valid Settings.	OctetStringr/w Constraints: range: 0-25	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.7
inactiveUniqueWanPppoeSerName The unique wan pppoe mode service name of this table. 0 - Initial len and cannot be set to this len. 1..128 - Valid Settings.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.8
inactiveUniqueWanPppoeAuthMode The unique wan pppoe mode authentication mode of this table. 0 - auto (the default) 1 - chap 2 - pap	Enumerationr/w Enumerated Values: 0 auto 1 chap 2 pap	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.9
inactiveUniqueWanPppoeConnMode The unique wan pppoe mode connection mode of this table. 0 - always (the default) 1 - demand	Enumerationr/w Enumerated Values: 0 always 1 demand	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.10
inactiveUniqueWanPppoeNat The unique wan pppoe mode NAT of this table. 0 - disable 1 - enable(the default)	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.11
inactiveUniqueWanPppoeReleTime The unique wan pppoe mode release time of this table, should be inputted with <1-65535>. 0 - Initial value and cannot be set to this value. 1..65535 - Valid Settings.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.12
inactiveUniqueWanStaticIp The unique wan static ip mode ip address of this table.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.13
inactiveUniqueWanStaticMask The unique wan static ip mode ip mask of this table.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.14
inactiveUniqueWanStaticGateway The unique wan static ip mode ip gateway of this table.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.15
inactiveUniqueWanStaticMasterDns The unique wan static ip mode master DNS of this table.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.16
inactiveUniqueWanStaticSlaveDns The unique wan static ip mode slave DNS of this table.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.17
inactiveUniqueWanRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.18

inactive control multicast table.

inactiveCtrlMcastEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.8.1.1

entry of inactive control muticast table

Indexes

inactiveCtrlMcastIndex

Column	Syntax	OID
inactiveCtrlMcastIndex The index of inactive control multicast table, should be inputted with <0-127>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.2.8.1.1.1
inactiveCtrlMcastName name of inactive control multicast entry.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.2.8.1.1.2
inactiveCtrlMcastRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.8.1.1.3

inactive domain control multicast base ont table.

inactiveCtrlMcastOntEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1

entry of inactive control multicast base ont table

Indexes

inactiveCtrlMcastIndexI inactiveCtrlMcastEntryIndex

Column	Syntax	OID
inactiveCtrlMcastIndexI The index of control multicast profile. Should in <0-127>.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.1
inactiveCtrlMcastEntryIndex The index of control multicast entry, the 2nd index of this table. Should in <0-31>.	Integer32 Constraints: range: 0-31	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.2
inactiveCtrlMcastAccessType inactiveCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.3
inactiveCtrlMcastVid control multicast vlan id, should be <1-4094>.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.4
inactiveCtrlMcastSrcIp control multicast source ip address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.5
inactiveCtrlMcastDstStartIp control multicast destination start ip address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.6
inactiveCtrlMcastDstEndIp control multicast destination end ip address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.7
inactiveCtrlMcastGroupBw control multicast group bandwidth, should be <1-1024000>.	Integer32r/w Constraints: range: 1-1024000	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.8
inactiveCtrlMcastDurationTimes control multicast duration times, should be <10-6000>.	Integer32r/w Constraints: range: 10-6000	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.9
inactiveCtrlMcastNumOfTimes control multicast number of times, should be <1-255>.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.10
inactiveCtrlMcastTimeInterval control multicast time interval, should be <1-7200>.	Integer32r/w Constraints: range: 1-7200	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.11
inactiveCtrlMcastResetTime control multicast reset time o'clock, should be <1-24>.	Integer32r/w Constraints: range: 1-24	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.12
inactiveCtrlMcastNport ethernet port number 1-24 of the entry assigned, default 25 means ctrl mcast base ont.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.13
inactiveCtrlMcastOntRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.14

inactive control alarm table.

inactiveCtrlAlarmEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1

entry of inactive control alarm table

Indexes

inactiveCtrlAlarmAimIndex

Column	Syntax	OID
inactiveCtrlAlarmAimIndex The index of inactive control alarm table, should be <0-127>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.1
inactiveCtrlAlarmAimName the name of aim.	OctetStringr/w Constraints: range: 1-128	.1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.2
inactiveCtrlAlarmReferLine Line bitmap, each line references this aim.	OctetString	.1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.3
inactiveCtrlAlarmReferUnique Unique bitmap, each unique references this aim.	OctetString	.1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.4
inactiveCtrlAlarmRowStatus The inactive control alarm table rowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.5

inactive control alarm threshold table.

inactiveCtrlAlarmThrldEntry row .1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1

entry of inactive control alarm threshold table

Indexes

inactiveCtrlAlarmThrldAimIndex inactiveCtrlAlarmThrldRxOrTx

Column	Syntax	OID
inactiveCtrlAlarmThrldAimIndex The index of inactive control alarm threshold table, should be <0-127>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1.1
inactiveCtrlAlarmThrldRxOrTx The secend index of inactive control alarm threshold entry.	Enumeration Enumerated Values: 0 none 1 rx 2 tx	.1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1.2
inactiveCtrlAlarmThrldHigh The high threshold of rx or tx alarm, The actual value is half the input value, if the threshold is rx, the actual value is the opposite.	Integer32r/w Constraints: range: 0-254	.1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1.3
inactiveCtrlAlarmThrldLow The low threshold of rx or tx alarm, The actual value is half the input value, if the threshold is rx, the actual value is the opposite.	Integer32r/w Constraints: range: 0-254	.1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1.4

active domain auth table

activeAuthEntry row .1.3.6.1.4.1.13464.1.14.1.1.3.1.1

entry of active auth table

Indexes

activeAuthIndex

Column	Syntax	OID
activeAuthIndex The index of active auth table, should be inputted with <0-4095>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.1
activeAuthDescription auth description, max length: 128.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.2
activeAuthMode activeAuthMode: 0 auth mode sn 1 auth mode pw 2 auth mode sn_pw 3 auth mode loid 4 auth mode lopw 5 auth mode loid_lopw	Integer32 Constraints: range: 0-5	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.3
activeAuthSn auth sn, string-hex, max length: 16.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.4
activeAuthPw auth password, string, max length: 20.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.5
activeAuthLoid auth loid, max length: 24.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.6
activeAuthLopw auth logic password, max length: 12.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.7
activeAuthAssignedSlot slot id pre assigned. if not configed, its '-'.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.8
activeAuthAssignedPport pon port id pre assigned. if not configed, its '-'.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.9
activeAuthAssignedOnt ont id pre assigned. if not configed, its '-'.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.1.1.10

active domain dba table

activeDbaEntry row .1.3.6.1.4.1.13464.1.14.1.1.3.2.1

entry of active dba table

Indexes

activeDbaIndex

Column	Syntax	OID
activeDbaIndex The index of active dba table, should be inputted with <0-127>.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.13464.1.14.1.1.3.2.1.1
activeDbaDescription active dba description, max length: 128.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.2.1.2
activeDbaType activeDbaType, 1 fixed bandwidth 2 assured bandwidth 3 assured and max bandwidth 4 max bandwidth 5 fixed and assured and max bandwidth	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.13464.1.14.1.1.3.2.1.3
activeDbaFixBandwidth Must to be divisible by 64kbps, must not less than 128 kbps.	Integer32 Constraints: range: 128-1310720	.1.3.6.1.4.1.13464.1.14.1.1.3.2.1.4
activeDbaAssuredBandwidth Must to be divisible by 64kbps, Can be 0. If not 0, it must be at least 256 kbps.	Integer32 Constraints: range: 0-1310592	.1.3.6.1.4.1.13464.1.14.1.1.3.2.1.5
activeDbaMaxBandwidth Must to be divisible by 64kbps, and must not be less than the sum of assured BW plus fixedBW. Must less than 1310720 kbps	Integer32 Constraints: range: 0-1310720	.1.3.6.1.4.1.13464.1.14.1.1.3.2.1.6

active domain line primary table

activeLinePrimaryEntry row .1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1

entry of active line primary table

Indexes

activeLineIndex

Column	Syntax	OID
activeLineIndex The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.1
activeLineDeviceType activeLineDeviceType: c30-214 2ETH(1ETH+1iTV)+1POTS SFU c30-400 4ETH SFU c30-401 4ETH+WIFI HGU c30-420 4ETH+2POTS SFU c30-423 4ETH+2POTS+WIFI+USB HGU c31-423 4ETH+2POTS+WIFI+USB HGU+SFU c40-100 1ETH SFU c40-201 …	OctetString Constraints: range: 7-7	.1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.2
activeLineDescription line description, max length: 128.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.3
activeLineTrafficMode activeLineTrafficMode: 0 pri-queue: priority queue scheduling 1 gem-car: GEM traffic control	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.4
activeLineMappingMode activeLineMappingMode: 0 vlan 1 priority 2 vlan-priority 3 port 4 port-vlan 5 port-priority 6 port-vlan-priority	Integer32 Constraints: range: 0-6	.1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.5