cmpACFailure | .0.1.1.12.0.1 | AC failure  | 
  cmpSysgotoshutdown | .0.1.1.12.0.10 | System is going to shutdown  | 
  cmpACNormal | .0.1.1.12.0.100 | AC normal  | 
  cmpOutputBadAlarm | .0.1.1.12.0.103 | Output bad alarm  | 
  cmpBypassBadAlarm | .0.1.1.12.0.104 | Bypass bad alarm  | 
  cmpOutputOffAlarm | .0.1.1.12.0.105 | Output off alarm  | 
  cmpUPSShutAlarm | .0.1.1.12.0.106 | UPS shutdown alarm  | 
  cmpSystemOffAlarm | .0.1.1.12.0.107 | System off alarm  | 
  cmpFuseFailureAlarm | .0.1.1.12.0.108 | Fuse failure alarm  | 
  cmpGenFailureAlarm | .0.1.1.12.0.109 | General failure alarm  | 
  cmpSitefault | .0.1.1.12.0.11 | Site fault  | 
  cmpAwaitPowerAlarm | .0.1.1.12.0.110 | Awaiting power alarm  | 
  cmpShutPendingAlarm | .0.1.1.12.0.111 | Shutdown pending alarm  | 
  cmpBatDepleted | .0.1.1.12.0.112 | Battery depleted  | 
  cmpUnknowStatus | .0.1.1.12.0.113 | Battery unknow status  | 
  cmpOutputOn | .0.1.1.12.0.114 | Output on  | 
  cmpTurntobypass | .0.1.1.12.0.115 | Ups turn to bypass mode  | 
  cmpTurntobattery | .0.1.1.12.0.116 | Ups turn to battery mode  | 
  cmpOutBooster | .0.1.1.12.0.117 | Turn to booster  | 
  cmpOutReducer | .0.1.1.12.0.118 | Turn to reducer  | 
  cmpOutBattest | .0.1.1.12.0.119 | Turn to battery test mode  | 
  cmpPhasesequenceincorrect | .0.1.1.12.0.12 | Phase sequence incorrect  | 
  cmpOtherSource | .0.1.1.12.0.120 | Other source  | 
  cmpBatfailure | .0.1.1.12.0.121 | Battery failure  | 
  cmpBatTestDonePassed | .0.1.1.12.0.122 | Battery test passed  | 
  cmpBatTestDoneWarning | .0.1.1.12.0.123 | Battery test done warning  | 
  cmpBatTestDoneAborted | .0.1.1.12.0.124 | Battery test done Aborted  | 
  cmpBatteryNormal | .0.1.1.12.0.125 | Battery normal  | 
  cmpBatteryDischarging | .0.1.1.12.0.126 | Battery Discharging  | 
  cmpP1cutoffprealarm | .0.1.1.12.0.127 | P1 cut off pre-alarm  | 
  cmpInputPhaseError | .0.1.1.12.0.128 | Warning for input phase error for LV 6-10K UPS  | 
  cmpMaintainSwitchOpenalarm | .0.1.1.12.0.129 | Warning for maintain switch open  | 
  cmpPhasesequenceincorrectbypass | .0.1.1.12.0.13 | Phase sequence incorrect in bypass  | 
  cmpEMDChAbnormal1 | .0.1.1.12.0.130 | EMD Channels 1 Abnormal  | 
  cmpEMDChAbnormal2 | .0.1.1.12.0.131 | EMD Channels 2 Abnormal  | 
  cmpEMDChAbnormal3 | .0.1.1.12.0.132 | EMD Channels 3 Abnormal  | 
  cmpEMDChAbnormal4 | .0.1.1.12.0.133 | EMD Channels 4 Abnormal  | 
  cmpEMDChAbnormal5 | .0.1.1.12.0.134 | EMD Channels 5 Abnormal: smoke alarm  | 
  cmpEMDChAbnormal6 | .0.1.1.12.0.135 | EMD Channels 6 Abnormal  | 
  cmpEMDChAbnormal7 | .0.1.1.12.0.136 | EMD Channels 7 Abnormal  | 
  cmpEMDChAbnormal8 | .0.1.1.12.0.137 | EMD Channels 8 Abnormal  | 
  cmpFanalarm | .0.1.1.12.0.14 | Fan alarm.  | 
  cmpEPOenabled | .0.1.1.12.0.15 | EPO enabled  | 
  cmpUnabletotrunonUPS | .0.1.1.12.0.16 | Unalbe to turn on UPS  | 
  cmpOvertemperaturealarm | .0.1.1.12.0.17 | Over temperature alarm  | 
  cmpInputfrequnstablebypass | .0.1.1.12.0.18 | Input frequency unstable in bypass  | 
  cmpChargeralarm | .0.1.1.12.0.19 | Charger alarm  | 
  cmpFanFailure | .0.1.1.12.0.2 | Fan failure  | 
  cmpL1inputfusenotwork | .0.1.1.12.0.20 | L1 input fuse not working  | 
  cmpNeutralnotConnected | .0.1.1.12.0.21 | Neutral not connected  | 
  cmpL2inputfusenotwork | .0.1.1.12.0.22 | L2 input fuse not working  | 
  cmpL3inputfusenotwork | .0.1.1.12.0.23 | L3 input fuse not working  | 
  cmpPositivePFCabnormalL1 | .0.1.1.12.0.24 | Positive PFC abnormal in L1  | 
  cmpNegativePFCabnormalL1 | .0.1.1.12.0.25 | Negative PFC abnormal in L1  | 
  cmpPositivePFCabnormalL2 | .0.1.1.12.0.26 | Positive PFC abnormal in L2  | 
  cmpNegativePFCabnormalL2 | .0.1.1.12.0.27 | Negative PFC abnormal in L2  | 
  cmpPositivePFCabnormalL3 | .0.1.1.12.0.28 | Positive PFC abnormal in L3  | 
  cmpNegativePFCabnormalL3 | .0.1.1.12.0.29 | Negative PFC abnormal in L3  | 
  cmpUPSFailure | .0.1.1.12.0.3 | UPS failure  | 
  cmpBusvoltagenotwds | .0.1.1.12.0.30 | Bus voltage not within default setting  | 
  cmpBusvoltageovermaxvalue | .0.1.1.12.0.31 | Bus voltage over maxinum value  | 
  cmpBusvoltagebelowminvalue | .0.1.1.12.0.32 | Bus voltage below mininum value  | 
  cmpBusvoltagediffoutofrange | .0.1.1.12.0.33 | Bus voltage differences out fo acceptable range  | 
  cmpBusvoltageofsloperatetoofast | .0.1.1.12.0.34 | Bus voltage of slope rate drops too fast  | 
  cmpOvercurrentinPFCII | .0.1.1.12.0.35 | WARNING:Over current in PFC input inductor.  | 
  cmpInvertervoloutofrange | .0.1.1.12.0.36 | Inverter voltage not within default setting.  | 
  cmpInvertervolovermaxvalue | .0.1.1.12.0.37 | Inverter voltage over maximum value.  | 
  cmpInvertervolbelowminvalue | .0.1.1.12.0.38 | Inverter voltage below minimum value.  | 
  cmpBatteryoppositelyconnected | .0.1.1.12.0.39 | Battery oppositely connected.  | 
  cmpChargerFailure | .0.1.1.12.0.4 | Charger failure  | 
  cmpL2phaseshortcicuited | .0.1.1.12.0.40 | L2Phase inverter short-cicuited.  | 
  cmpL3phaseshortcicuited | .0.1.1.12.0.41 | L3Phase inverter short-cicuited.  | 
  cmpL1L2invertershortcicuited | .0.1.1.12.0.42 | L1L2Inverter short-cicuited.  | 
  cmpL2L3invertershortcicuited | .0.1.1.12.0.43 | L2L3Inverter short-cicuited.  | 
  cmpL3L1invertershortcicuited | .0.1.1.12.0.44 | L3L1Inverter short-cicuited.  | 
  cmpL1negativepoweroutofrange | .0.1.1.12.0.45 | L1 inverter negative powere out of acceptable range.  | 
  cmpL2negativepoweroutofrange | .0.1.1.12.0.46 | L2 inverter negative powere out of acceptable range.  | 
  cmpL3negativepoweroutofrange | .0.1.1.12.0.47 | L3 inverter negative powere out of acceptable range.  | 
  cmpBatterySCRshortcircuited | .0.1.1.12.0.48 | Battery SCR short-circuited.  | 
  cmpLineSCRshortcircuited | .0.1.1.12.0.49 | Line SCR short-circuited.  | 
  cmpOverloadFailure | .0.1.1.12.0.5 | Overload failure  | 
  cmpInverterrelayopenfault | .0.1.1.12.0.50 | Inverter relay open fault.  | 
  cmpInverterrelayshortcircuited | .0.1.1.12.0.51 | Inverter relay short-circuited.  | 
  cmpInoutwiresoppositelyconnected | .0.1.1.12.0.52 | Input and output wires oppositely connected.  | 
  cmpabnormalcanbuscommunication | .0.1.1.12.0.53 | Abnormal in CAN-bus communication.  | 
  cmpcommfailurebcupsboard | .0.1.1.12.0.54 | Communication failure between cpus in control board.Or DSP and MCU communication error  | 
  cmpabnormalsyncsignalcircuit | .0.1.1.12.0.55 | Abnomal in synchronous signal circuit.  | 
  cmpabnormalsyncpulsesignalcircuit | .0.1.1.12.0.56 | Abnomal in synchronous pulse signal circuit.  | 
  cmpcurrent3punbalancedetected | .0.1.1.12.0.57 | Warning for a three-phase input current unbalance detected.  | 
  cmpbatteryselftestfailure | .0.1.1.12.0.58 | Battery self-test failure.  | 
  cmpintercurrentunbalance | .0.1.1.12.0.59 | Inverter inter-current unbalance.  | 
  cmpOvertempFailure | .0.1.1.12.0.6 | Over temperature fault.  | 
  cmpbatterydisconnected | .0.1.1.12.0.60 | Battery disconnected.  | 
  cmpabnormalhostsignalcircuit | .0.1.1.12.0.61 | Abnormal in host signal circuit.  | 
  cmpbatteryovercharged | .0.1.1.12.0.62 | Bettery overcharged.  | 
  cmpbatteryvoltoohigh | .0.1.1.12.0.63 | Bettery voltage is too high.  | 
  cmpbatteryvoltoolow | .0.1.1.12.0.64 | Bettery voltage is too low.  | 
  cmpfemaleconnectornotconnwell | .0.1.1.12.0.65 | Female connector of parallel cable not connected well.  | 
  cmpmaleconnectornotconnwell | .0.1.1.12.0.66 | Male connector of parallel cable not connected well.  | 
  cmplockingbypassA3COW30M | .0.1.1.12.0.67 | Locking inbypass mode after 3 consecutive overloads within 30 minutes  | 
  cmpparallelcabledisconnected | .0.1.1.12.0.68 | Parallel cable disconnected  | 
  cmpsyncpulsecircuitfault | .0.1.1.12.0.69 | Synchronous pulse signal circuit fault  | 
  cmpInvertershortcircuited | .0.1.1.12.0.7 | Inverter short-circuited  | 
  cmpsyncsignalcircuitfalt | .0.1.1.12.0.70 | Synchronous  signal circuit fault  | 
  cmphostsignalcircuitfault | .0.1.1.12.0.71 | Host signal circuit fault  | 
  cmpcanbuscommunicationfault | .0.1.1.12.0.72 | Can-bus communication fault  | 
  cmplowlosspointforvolinACmode | .0.1.1.12.0.73 | Low loss point for voltage in ac mode not consistent in parallel systems  | 
  cmphighlosspointforvolinACmode | .0.1.1.12.0.74 | High loss point for voltage in ac mode not consistent in parallel systems  | 
  cmplowlosspointforfreqinACmode | .0.1.1.12.0.75 | Low loss point for frequency in ac mode not consistent in parallel systems  | 
  cmphighlosspointforfreqinACmode | .0.1.1.12.0.76 | High loss point for frequency in ac mode not consistent in parallel systems  | 
  cmplowlosspointforvolinbypassmode | .0.1.1.12.0.77 | Low loss point for voltage in bypass mode not consistent in parallel systems  | 
  cmphighlosspointforvolinbypassmode | .0.1.1.12.0.78 | High loss point for voltage in bypass mode not consistent in parallel systems  | 
  cmplowlosspointforfreqinbypassmode | .0.1.1.12.0.79 | Low loss point for frequency in bypass mode not consistent in parallel systems  | 
  cmpbatteryfusebeingoc | .0.1.1.12.0.8 | Battery fuse being open-dcircuited failure  | 
  cmphighlosspointforfreqinbypassmode | .0.1.1.12.0.80 | High loss point for frequency in bypass mode not consistent in parallel systems  | 
  cmploadunbalanced | .0.1.1.12.0.81 | Load unbalanced  | 
  cmpoverloadalarm | .0.1.1.12.0.82 | Overload alarm  | 
  cmpparallelnotconnectedwell | .0.1.1.12.0.83 | Parallel cable not connected well  | 
  cmpcommunicationlost | .0.1.1.12.0.84 | Communication lost  | 
  cmpbatteryconnnotsonsistent | .0.1.1.12.0.85 | Battery connection not consistent in parallel systems  | 
  cmpconverternotconsisstent | .0.1.1.12.0.86 | Converter setting not consistent in parallel systems  | 
  cmpbypassnotallownotconsistent | .0.1.1.12.0.87 | Bypass not allowed setting not consistent in parallel systems  | 
  cmpACconnnotconsistent | .0.1.1.12.0.88 | AC connection not consistent in parallel systems  | 
  cmpinput3pcurrentunbalance | .0.1.1.12.0.89 | Warning for three-phase ac input current unbalance  | 
  cmpLowbattery | .0.1.1.12.0.9 | The UPS has returned from a low battery
condition.  | 
  cmpbypassconnnotconsistent | .0.1.1.12.0.90 | Bypass connection not consistent in parallel systems  | 
  cmpbatteryprotectionnotconsistent | .0.1.1.12.0.91 | Battery protection setting not consistent in parallel systems  | 
  cmpbatterydetectionnotconsistent | .0.1.1.12.0.92 | Battery detection setting not consistent in parallel systems  | 
  cmpupsmodeltypesnotconsistent | .0.1.1.12.0.93 | UPS model types not consistent in parallel systems  | 
  cmpbypassnotconsistent | .0.1.1.12.0.94 | Bypass setting not consistent in parallel systems  | 
  cmpcapacitynotconsistent | .0.1.1.12.0.95 | Capacity of upss not consistent in parallel systems  | 
  cmpautorestartnotconsistent | .0.1.1.12.0.96 | Auto restart setting not consistent in parallel systems  | 
  cmpBatteryReplace | .0.1.1.12.0.97 | Battery need to be replace  | 
  cmpPVFailure | .0.1.2.15.0.1 | PV fail  | 
  cmpGridFreqHLossFailure | .0.1.2.15.0.10 | Grid frequency high loss  | 
  cmpGridFreqLLossFailure | .0.1.2.15.0.11 | Grid frequency low loss  | 
  cmpFeedVolOverFailure | .0.1.2.15.0.12 | Feeding average voltage over  | 
  cmpGetEnergyFGridWarn | .0.1.2.15.0.13 | get energy from the grid  | 
  cmpPVChAbnormal1 | .0.1.2.15.0.130 | EMD Channels 1 Abnormal  | 
  cmpPVChAbnormal2 | .0.1.2.15.0.131 | EMD Channels 2 Abnormal  | 
  cmpPVChAbnormal3 | .0.1.2.15.0.132 | EMD Channels 3 Abnormal  | 
  cmpPVChAbnormal4 | .0.1.2.15.0.133 | EMD Channels 4 Abnormal  | 
  cmpPVChAbnormal5 | .0.1.2.15.0.134 | EMD Channels 5 Abnormal: smoke alarm  | 
  cmpPVChAbnormal6 | .0.1.2.15.0.135 | EMD Channels 6 Abnormal  | 
  cmpPVChAbnormal7 | .0.1.2.15.0.136 | EMD Channels 7 Abnormal  | 
  cmpPVChAbnormal8 | .0.1.2.15.0.137 | EMD Channels 8 Abnormal  | 
  cmpEPOActiveWarn | .0.1.2.15.0.14 | EPO active  | 
  cmpBusOverVolFail | .0.1.2.15.0.15 | Bus over voltage  | 
  cmpBusUnderVolFail | .0.1.2.15.0.16 | Bus under voltage  | 
  cmpBusSoftStartTimeOut | .0.1.2.15.0.17 | Bus soft start time out  | 
  cmpInverterStartTimeOut | .0.1.2.15.0.18 | Inverter soft start time out  | 
  cmpInverterShort | .0.1.2.15.0.19 | Inverter short  | 
  cmpAutoAdjustFailure | .0.1.2.15.0.2 | Auto adjust processing  | 
  cmpPVOverTemperature | .0.1.2.15.0.20 | Over temperature  | 
  cmpPVRelayFault | .0.1.2.15.0.21 | Relay fault  | 
  cmpDCCurrentFail | .0.1.2.15.0.22 | DC current fail  | 
  cmpPVHighVolFail | .0.1.2.15.0.23 | PV high voltage  | 
  cmpPVPowerDown | .0.1.2.15.0.24 | Power down  | 
  cmpPVInputShortFail | .0.1.2.15.0.25 | PV input short  | 
  cmpPVGFCIOverFail | .0.1.2.15.0.26 | GFCI over  | 
  cmpPVIsolationLow | .0.1.2.15.0.27 | PV isolation low  | 
  cmpInverterDCCurrOver | .0.1.2.15.0.28 | Inverter DC current over  | 
  cmpMCUDSPLineFail | .0.1.2.15.0.29 | Line value consistent fail between MCU & DSP  | 
  cmpExFlashFailure | .0.1.2.15.0.3 | External flash fail  | 
  cmpPVGFCISensorFail | .0.1.2.15.0.30 | GFCI sensor fail  | 
  cmpMCUDSPConnectFail | .0.1.2.15.0.31 | Connect fail between MCU & DSP  | 
  cmpMCUDSPCommuicateFail | .0.1.2.15.0.32 | Communication fail between MCU & DSP  | 
  cmpPVGroundLossFail | .0.1.2.15.0.33 | Ground loss  | 
  cmpPVPowerOnMode | .0.1.2.15.0.34 | Power On Mode  | 
  cmpPVStandbyMode | .0.1.2.15.0.35 | Standby Mode  | 
  cmpPVBypassMode | .0.1.2.15.0.36 | Bypass Mode  | 
  cmpPVLineMode | .0.1.2.15.0.37 | Line Mode  | 
  cmpPVBatteryMode | .0.1.2.15.0.38 | Battery Mode  | 
  cmpPVBatteryTestMode | .0.1.2.15.0.39 | Battery Test Mode  | 
  cmpPVLossFailure | .0.1.2.15.0.4 | PV loss  | 
  cmpPVFaultMode | .0.1.2.15.0.40 | Fault Mode  | 
  cmpPVShutdownMode | .0.1.2.15.0.41 | Shutdown Mode  | 
  cmpPVGridMode | .0.1.2.15.0.42 | Grid mode  | 
  cmpPVOtherMode | .0.1.2.15.0.43 | other solar inverter mode  | 
  cmpPVChargeMode | .0.1.2.15.0.44 | Charge mode  | 
  cmpPVBatteryUnder | .0.1.2.15.0.45 | Battery under  | 
  cmpPVBatteryLow | .0.1.2.15.0.46 | Battery low  | 
  cmpPVBatteryOpen | .0.1.2.15.0.47 | Battery open  | 
  cmpPVBatDischatgeLow | .0.1.2.15.0.48 | Battery discharge low  | 
  cmpPVOverLow | .0.1.2.15.0.49 | Over low  | 
  cmpPVLowFailure | .0.1.2.15.0.5 | PV low  | 
  cmpLandingFailure | .0.1.2.15.0.6 | Islanding detect  | 
  cmpInitialFailure | .0.1.2.15.0.7 | Initial fail  | 
  cmpGridVolHLossFailure | .0.1.2.15.0.8 | Grid voltage high loss  | 
  cmpGridVolLLossFailure | .0.1.2.15.0.9 | Grid voltage low loss  | 
  cmpATSSourceS1VolBad | .0.1.4.8.0.1 | Source S1 Voltage rms bad  | 
  cmpATSSynchronBad | .0.1.4.8.0.10 | Synchron bad  | 
  cmpATSAuxPower1Fail | .0.1.4.8.0.11 | Aux. Power1 failure  | 
  cmpATSAuxPower2Fail | .0.1.4.8.0.12 | Aux. Power2 failure  | 
  cmpATSShortFault | .0.1.4.8.0.13 | Short fault  | 
  cmpATSChAbnormal1 | .0.1.4.8.0.130 | EMD Channels 1 Abnormal  | 
  cmpATSChAbnormal2 | .0.1.4.8.0.131 | EMD Channels 2 Abnormal  | 
  cmpATSChAbnormal3 | .0.1.4.8.0.132 | EMD Channels 3 Abnormal  | 
  cmpATSChAbnormal4 | .0.1.4.8.0.133 | EMD Channels 4 Abnormal  | 
  cmpATSChAbnormal5 | .0.1.4.8.0.134 | EMD Channels 5 Abnormal: smoke alarm  | 
  cmpATSChAbnormal6 | .0.1.4.8.0.135 | EMD Channels 6 Abnormal  | 
  cmpATSChAbnormal7 | .0.1.4.8.0.136 | EMD Channels 7 Abnormal  | 
  cmpATSChAbnormal8 | .0.1.4.8.0.137 | EMD Channels 8 Abnormal  | 
  cmpATSOverloadFault | .0.1.4.8.0.14 | Overload fault  | 
  cmpATSOverloadAlarm | .0.1.4.8.0.15 | Overload  Alarm  | 
  cmpATSOnFaultMode | .0.1.4.8.0.16 | On fault mode  | 
  cmpATSSourceS1FreqBad | .0.1.4.8.0.2 | Source S1 frequency bad  | 
  cmpATSSourceS1WaveBad | .0.1.4.8.0.3 | Source S1 wave bad  | 
  cmpATSSourceS2VolBad | .0.1.4.8.0.4 | Source S2 Voltage rms bad  | 
  cmpATSSourceS2FreqBad | .0.1.4.8.0.5 | Source S2 frequency bad  | 
  cmpATSSourceS2WaveBad | .0.1.4.8.0.6 | Source S2 wave bad  | 
  cmpATSOnSourceS2 | .0.1.4.8.0.7 | On Source S2  | 
  cmpATSOnSourceS1 | .0.1.4.8.0.8 | On Source S1  | 
  cmpATSSourceS2Preferred | .0.1.4.8.0.9 | Source S2 Preferred Source  |