NEWTEC-PROTECTEDTSOVERIPIN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
37

ntcProtTsOIpInConfTable

table
.1.3.6.1.4.1.5835.5.2.9400.1.3 · 1 row entry · 14 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcProtTsOIpInConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-PROTECTEDTSOVERIPIN-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-PROTECTEDTSOVERIPIN-MIB::ntcProtTsOIpInConfTable' 
Configuration table
ntcProtTsOIpInConfEntry row .1.3.6.1.4.1.5835.5.2.9400.1.3.1
A conceptual row of the ntcProtTsOIpInConfTable.
Indexes
Column Syntax OID
ntcProtTsOIpInConfName
Name of the configuration
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.1
ntcProtTsOIpInInpSelection
Select the input interface for the TS over IP functionality.
Enumerationr/w
Enumerated Values:
1none
2data1
3data2
4data
5any
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.2
ntcProtTsOIpInTsEncapProtocol
Encapsulation protocol used for the received TS over IP functionality (UDP,
RTP and RTP with FEC).
Enumerationr/w
Enumerated Values:
0udp
1rtp
2rtpfec
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.3
ntcProtTsOIpInIpAddressType
Configuration of the IP address type for TS over IP reception. (unicast or
multicast)
Enumerationr/w
Enumerated Values:
0unicast
1multicast
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.4
ntcProtTsOIpInMulticastAddress
Define the multicast IP address used to receive the TS over IP data
functionality. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.5
ntcProtTsOIpInMulticastSourceA
Multicast source Address. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
NEWTEC-TC-MIBNtcNetworkAddressr/w
Type Constraints:
range: 7..18
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.6
ntcProtTsOIpInMulticastSourceB
Multicast source Address. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
NEWTEC-TC-MIBNtcNetworkAddressr/w
Type Constraints:
range: 7..18
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.7
ntcProtTsOIpInUdpPort
Configure the UDP port on which the TS over IP stream is received.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.8
ntcProtTsOIpInTrafficProfile
Configure the TS input traffic profile for the TS stream (CBR=constant or
VBR=variable bitrate).
Enumerationr/w
Enumerated Values:
0vbr
1cbr
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.9
ntcProtTsOIpInInputRateType
When the operator selects 'User Defined', the actual input rate and the
control loop type needs to be specified further. In the other case, PCR PID
and control loop type is used.
Enumerationr/w
Enumerated Values:
0userdefined
1pcr
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.10
ntcProtTsOIpInAutoPcrDetection
Enable or disable Auto PCR Detection.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.11
ntcProtTsOIpInPcrPid
PCR PID.
Unsigned32r/w
Constraints:
range: 0-8191
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.12
ntcProtTsOIpInMaxBufferDelay
The maximum delay introduced by the device to compensate jitter introduced by
the IP network. This is only relevant for CBR traffic.
msSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.13
ntcProtTsOIpInInputTsBitRate
TS input rate in bps used with a constant bitrate input traffic profile.
Current devices support a range of 10 to 250000000 bps.
bpsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.3.1.14

ntcProtTsOIpInMonTable

table
.1.3.6.1.4.1.5835.5.2.9400.1.4.5 · 1 row entry · 18 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcProtTsOIpInMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-PROTECTEDTSOVERIPIN-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-PROTECTEDTSOVERIPIN-MIB::ntcProtTsOIpInMonTable' 
Monitoring table
ntcProtTsOIpInMonEntry row .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1
A conceptual row of the ntcProtTsOIpInMonTable.
Indexes
Column Syntax OID
ntcProtTsOIpInMonName
Name of the output monitor
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.1
ntcProtTsOIpInMonMeasInTsBitRate
Displays the measured TS over IP input TS bit rate in bps.
bpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.2
ntcProtTsOIpInMonBufferDelay
The delay introduced by the device to compensate the jitter introduced by the
IP network. This is only relevant for CBR traffic.
msSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.3
ntcProtTsOIpInMonMinBufferFill
The measured minimum buffer delay in the buffer which compensate the jitter of
the IP network. This is only relevant for CBR traffic.
msSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.4
ntcProtTsOIpInMonMaxBufferFill
The measured maximum buffer delay in the buffer which compensate the jitter of
the IP network. This is only relevant for CBR traffic.
msSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.5
ntcProtTsOIpInMonSourceInfo
Displays the IP address (and UDP port) of the source that is generating the TS
over IP traffic.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.6
ntcProtTsOIpInMonRtpFecScheme
Displays the type of Rtp FEC Scheme currently used (if any).
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.7
ntcProtTsOIpInMonTsInCount
Displays the Number of received TS packets in UDP mode.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.8
ntcProtTsOIpInMonRtpInCount
Displays the number of received RTP packets. (only applicable when RTP is
used)
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.9
ntcProtTsOIpInMonRtpColFecInCnt
Displays the number of received (input) RTP column FEC packets.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.10
ntcProtTsOIpInMonRtpRowFecInCnt
Displays the number of received RTP row FEC packets. (Only applicable when RTP
with FEC is used.)
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.11
ntcProtTsOIpInMonTsOutCount
Displays the number of valid TS packets leaving the TS over IP input
processing.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.12
ntcProtTsOIpInMonTsDropCount
Number of dropped TS packets. (When RTP is used the number of dropped TS
packets in the RTP frame is counted.)
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.13
ntcProtTsOIpInMonTsOverflowCount
Displays the number of TS packets that are dropped because of an overflow
situation.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.14
ntcProtTsOIpInMonRtpDropCount
Displays the number of dropped RTP packets. (This is only applicable when RTP
is used.)
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.15
ntcProtTsOIpInMonRtpFecDropCount
Displays the number of dropped uncorrectable packets. (This is only applicable
when RTP-FEC is used.)
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.16
ntcProtTsOIpInMonRtpRepairCount
Displays the number of repaired RTP packets by using the received FEC
information. (This is only applicable for RTP with FEC)
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.17
ntcProtTsOIpInActivePcrPid
Active PCR PID.
Unsigned32
Constraints:
range: 0-8190
 .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.18

ntcProtTsOIpInAlarmStatusTable

table
.1.3.6.1.4.1.5835.5.2.9400.1.5.1 · 1 row entry · 5 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcProtTsOIpInAlarmStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-PROTECTEDTSOVERIPIN-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-PROTECTEDTSOVERIPIN-MIB::ntcProtTsOIpInAlarmStatusTable' 
Alarm status table
ntcProtTsOIpInAlarmStatusEntry row .1.3.6.1.4.1.5835.5.2.9400.1.5.1.1
A conceptual row of the ntcProtTsOIpInAlarmStatusTable.
Indexes
Column Syntax OID
ntcProtTsOIpInAlarmStatusName
Name of the alarm monitor
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.1
ntcProtTsOIpInNoInputData
This alarm is raised when no input data is received for at least one of the
the redundant TS over IP inputs. This variable indicates the current status of
the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.2
ntcProtTsOIpInBufferUnderflow
This alarm is raised when the input data buffer is below the minimum value.
This variable indicates the current status of the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.3
ntcProtTsOIpInBufferOverflow
This alarm is raised when the input data buffer of TS over IP is full. This
variable indicates the current status of the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.4
ntcProtTsOIpInRtpNoSync
This alarm is raised when no valid RTP input data is received. This variable
indicates the current status of the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.5