NETGEAR-ROUTE-POLICY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
22
.1.3.6.1.4.1.4526.10.2.20.1 · 1 row entry · 4 columns
Table to configure or fetch current list of route-map statements
fastpathRoutePolicyNameEntry entry .1.3.6.1.4.1.4526.10.2.20.1.1
Each entry in this table corresponds to a route-map statement
Indexes
fastpathRoutePolicyName fastpathRoutePolicyStmtActionType fastpathRoutePolicySequence
Column Syntax OID
fastpathRoutePolicyName
The name of a Route Map statement.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.4526.10.2.20.1.1.1
fastpathRoutePolicyStmtActionType
The action associated with this route-map statement.
This can be either Permit/Deny
FastpathRoutePolicyActionr/w
Textual Convention: FastpathRoutePolicyAction Enumeration
Type Values:
1permit
2deny
.1.3.6.1.4.1.4526.10.2.20.1.1.2
fastpathRoutePolicySequence
Route Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4526.10.2.20.1.1.3
fastpathRoutePolicyNameRowStatus
Controls creation and deletion of Row Status entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.4526.10.2.20.1.1.4
.1.3.6.1.4.1.4526.10.2.20.2 · 1 row entry · 15 columns
Table to configure match or set statements in a route-map statement.
fastpathRoutePolicyStatementEntry entry .1.3.6.1.4.1.4526.10.2.20.2.1
Each entry describes match and set terms in a route-map statement if configured
Indexes
fastpathRoutePolicyStmtName fastpathRoutePolicyStmtSeqNum fastpathRoutePolicyStmtAction
Column Syntax OID
fastpathRoutePolicyStmtName
The name of a Route Map.
OctetString
Constraints:
range: 1-31
.1.3.6.1.4.1.4526.10.2.20.2.1.1
fastpathRoutePolicyStmtSeqNum
Route Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.10.2.20.2.1.2
fastpathRoutePolicyStmtAction
The action associated with this route-map statement.
This can be either Permit/Deny
FastpathRoutePolicyAction
Textual Convention: FastpathRoutePolicyAction Enumeration
Type Values:
1permit
2deny
.1.3.6.1.4.1.4526.10.2.20.2.1.3
fastpathRoutePolicyStmtMatchIpv4AclList
The string containing a list of IPv4 ACLs. This
list contains either IPV4 standard ACL/IPV4 extended
ACL/ named IPv4 ACL. In a single match statement,
up to a maximum of 16 IPV4 ACLs can be included.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.4526.10.2.20.2.1.4
fastpathRoutePolicyStmtMatchIpv4AclDelList
The string containing a list of IPv4 ACLs. This
list contains either IPV4 standard ACL/IPV4 extended
ACL/ named IPv4 ACL. In a single match statement,
up to a maximum of 16 IPV4 ACLs can be included.This
list is used to…
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.4526.10.2.20.2.1.5
fastpathRoutePolicyStmtMatchMacAclList
The string containing a list of MAC ACLs. This
list contains upto 16 MAC ACL names that can be
included in a match statement.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.4526.10.2.20.2.1.6
fastpathRoutePolicyStmtMatchMacAclDelList
The string containing a list of MAC ACLs. This
list contains upto 16 MAC ACL names that can be
included in a match statement. This MIB object is
used to delete MAC ACL lists matched in a route-map
statement via fastpat…
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.4526.10.2.20.2.1.7
fastpathRoutePolicyStmtMatchPacketLengthRangeMin
Minimum value in the packet length range in a match
length term. A value of zero is used to disable/remove
minimum length configuration.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.10.2.20.2.1.8
fastpathRoutePolicyStmtMatchPacketLengthRangeMax
Maximum value in the packet length range in a match
length term. A value of zero is used to disable/remove
maximum length configuration.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.10.2.20.2.1.9
fastpathRoutePolicyStmtSetIpNextHopList
The string containing a list of next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.4526.10.2.20.2.1.10
fastpathRoutePolicyStmtSetIpNextHopDelList
The string containing a list of next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified.This
MIB object is used to delete IP next-hop list configured
via fastpathRoutePolicyStmtSetIpNextHopList
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.4526.10.2.20.2.1.11
fastpathRoutePolicyStmtSetDefaultIpNextHopList
The string containing a list of default next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.4526.10.2.20.2.1.12
fastpathRoutePolicyStmtSetDefaultIpNextHopDelList
The string containing a list of default next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified.This MIB
object is used to delete IP default next-hop list configured
via fastpathRoutePolicyStmtSetDefau…
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.4526.10.2.20.2.1.13
fastpathRoutePolicyStmtSetIpPrecedence
IP Precedence value to be remarked. This is specified through
set clause in route-map statement. In order to remove configured precedence value,
use invalid(8) option.
FastpathRoutePolicyStmtIpPrecedencer/w
Textual Convention: FastpathRoutePolicyStmtIpPrecedence Enumeration
Type Values:
0routine
1priority
2immediate
3flash
4flash-override
5critical
6internet
7network
8invalid
.1.3.6.1.4.1.4526.10.2.20.2.1.14
fastpathRoutePolicyStmtSetIntfNull0
Specifying null0 as an interface in a route-map
statement
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.4526.10.2.20.2.1.15
.1.3.6.1.4.1.4526.10.2.20.3 · 1 row entry · 3 columns
A table of interfaces on which route-map is applied.
fastpathRoutePolicyIfEntry entry .1.3.6.1.4.1.4526.10.2.20.3.1
Indexes
fastpathRoutePolicyIfIndex fastpathRoutePolicyIfName
Column Syntax OID
fastpathRoutePolicyIfIndex
Interface to which route-map needs to be applied or Interface from which route-map needs to be removed.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.4526.10.2.20.3.1.1
fastpathRoutePolicyIfName
The name of a Route Map.
OctetStringr/w
Constraints:
range: 1-31
.1.3.6.1.4.1.4526.10.2.20.3.1.2
fastpathRoutePolicyIfRowStatus
Controls creation and deletion of Row Status entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.4526.10.2.20.3.1.3