NETGEAR-RADLAN-vlan-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
36
Rows
36
Columns
114

vlanNameTable

table
.1.3.6.1.4.1.4526.17.48.21 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanNameTable' 
This table translates Vlan name to Vlan's tag and ifindex
vlanNameEntry row .1.3.6.1.4.1.4526.17.48.21.1
The row definition for this table.
Indexes
Column Syntax OID
vlanNameName
The Vlan's name
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4526.17.48.21.1.1
vlanNameTag
The Vlan's tag
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.48.21.1.2
vlanNameIfIndex
The Vlan's ifindex
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.48.21.1.3

vlanPortModeTable

table
.1.3.6.1.4.1.4526.17.48.22 · 1 row entry · 1 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPortModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPortModeTable' 
This table hold information on port status trunk or access
vlanPortModeEntry row .1.3.6.1.4.1.4526.17.48.22.1
The row definition for this table.
Indexes
Column Syntax OID
vlanPortModeState
The port state, 1 is generic cli
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.48.22.1.1

vlanSpecialTagTable

table
.1.3.6.1.4.1.4526.17.48.33 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanSpecialTagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanSpecialTagTable' 
special vlan tag used for this port
vlanSpecialTagEntry row .1.3.6.1.4.1.4526.17.48.33.1
entry of special tag
Indexes
Column Syntax OID
vlanSpecialTagVID
specify the special vlan tag .
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.33.1.1
vlanSpecialTagStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.33.1.2

vlanSpecialTagCurrentTable

table
.1.3.6.1.4.1.4526.17.48.34 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanSpecialTagCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanSpecialTagCurrentTable' 
special Current vlan tag used for this port
vlanSpecialTagCurrentEntry row .1.3.6.1.4.1.4526.17.48.34.1
entry of Current special tag
Indexes
Column Syntax OID
vlanSpecialTagCurrentVID
specify the special vlan tag .
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.34.1.1
vlanSpecialTagCurrentReserved
specify if the special vlan tag is reserved .
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.17.48.34.1.2
vlanSpecialTagCurrentActive
specify if the special vlan tag is used .
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.17.48.34.1.3

vlanPrivateEdgeTable

table
.1.3.6.1.4.1.4526.17.48.37 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPrivateEdgeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPrivateEdgeTable' 
table for pve port and uplink
vlanPrivateEdgeEntry row .1.3.6.1.4.1.4526.17.48.37.1
entry of pve
Indexes
Column Syntax OID
vlanPrivateEdgeUplink
specify the uplink port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.48.37.1.1
vlanPrivateEdgeStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.37.1.2

vlanDynamicVlanTable

table
.1.3.6.1.4.1.4526.17.48.39 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanDynamicVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanDynamicVlanTable' 
table for DynamicVlan
vlanDynamicVlanEntry row .1.3.6.1.4.1.4526.17.48.39.1
entry of DynamicVlan
Indexes
Column Syntax OID
vlanDynamicVlanMacAddress
mac address
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.17.48.39.1.1
vlanDynamicVlanTag
vlan Tag
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.39.1.2
vlanDynamicVlanStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.39.1.3

vlanPortModeExtTable

table
.1.3.6.1.4.1.4526.17.48.40 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPortModeExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPortModeExtTable' 
This table hold information on port status trunk or access
vlanPortModeExtEntry row .1.3.6.1.4.1.4526.17.48.40.1
The row definition for this table.
Indexes
Column Syntax OID
vlanPortModeExtState
The ext
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.48.40.1.1
vlanPortModeExtStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.40.1.2

vlanPrivateTableOld

table
.1.3.6.1.4.1.4526.17.48.42 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPrivateTableOld
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPrivateTableOld' 
table for PrivateVlan
vlanPrivateEntryOld row .1.3.6.1.4.1.4526.17.48.42.1
entry of PrivateVlan
Indexes
Column Syntax OID
vlanPrivateOldIsolatedVlanTag
vlan Tag
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.4526.17.48.42.1.1
vlanPrivateOldStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.42.1.2

vlanPrivateCommunityTable

table
.1.3.6.1.4.1.4526.17.48.43 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPrivateCommunityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPrivateCommunityTable' 
table for PrivateVlan
vlanPrivateCommunityEntry row .1.3.6.1.4.1.4526.17.48.43.1
entry of PrivateVlan
Indexes
Column Syntax OID
vlanPrivateCommunityVlanTag
vlan Tag
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.43.1.1
vlanPrivateCommunityStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.43.1.2

vlanMulticastTvTable

table
.1.3.6.1.4.1.4526.17.48.44 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanMulticastTvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanMulticastTvTable' 
multicast vlan used for this port
vlanMulticastTvEntry row .1.3.6.1.4.1.4526.17.48.44.1
entry of multicast tag
Indexes
Column Syntax OID
vlanMulticastTvVID
specify the TV vlan tag, vlan must exist .
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.44.1.1
vlanMulticastTvStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.44.1.2

vlanMacBaseVlanGroupTable

table
.1.3.6.1.4.1.4526.17.48.45 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanMacBaseVlanGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanMacBaseVlanGroupTable' 
A table that contains mappings from Range of MAC
addresses to Group Identifiers used for
MAC-based VLAN Classification.
vlanMacBaseVlanGroupEntry row .1.3.6.1.4.1.4526.17.48.45.1
A mapping from a Range of MAC addresses to a
Group Identifier.
Indexes
Column Syntax OID
vlanMacBaseVlanMacAddress
The base MAC address of the range.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.17.48.45.1.1
vlanMacBaseVlanMacMask
The Mask of the range.
The mask determains the leading '1' bits of the mask (MSB).
48 means single HOST and 9 means the widest range.
The MASK is limited to 9 to avoid entring ranges including
multicast addresses.
Integer32
Constraints:
range: 9-48
 .1.3.6.1.4.1.4526.17.48.45.1.2
vlanMacBaseVlanGroupId
Represents a group of ranges of MAC addresses
that are associated together when assigning a
VID to a frame.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4526.17.48.45.1.3
vlanMacBaseVlanGroupRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.45.1.4

vlanMacBaseVlanPortTable

table
.1.3.6.1.4.1.4526.17.48.46 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanMacBaseVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanMacBaseVlanPortTable' 
A table that contains VID sets used for
MAC-based VLAN Classification.
vlanMacBaseVlanPortEntry row .1.3.6.1.4.1.4526.17.48.46.1
A VID set for a port and group.
Indexes
Column Syntax OID
vlanMacBaseVlanPortGroupId
Designates a group of Ranges in the ranges
Group Database.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.4526.17.48.46.1.1
vlanMacBaseVlanPortGroupVid
The VID associated with a group of range MAC addresses for
each port.
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.46.1.2
vlanMacBaseVlanPortRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.46.1.3

vlanPrivateEdgeGroupTable

table
.1.3.6.1.4.1.4526.17.48.47 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPrivateEdgeGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPrivateEdgeGroupTable' 
table for pve port and uplink
vlanPrivateEdgeGroupEntry row .1.3.6.1.4.1.4526.17.48.47.1
entry of pve
Indexes
Column Syntax OID
vlanPrivateEdgeGroupSource
specify the uplink group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.48.47.1.1
vlanPrivateEdgeGroupUplink
specify the uplink port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.48.47.1.2
vlanPrivateEdgeGroupStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.47.1.3

vlanPrivateEdgeGroupIfIndexTable

table
.1.3.6.1.4.1.4526.17.48.48 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPrivateEdgeGroupIfIndexTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPrivateEdgeGroupIfIndexTable' 
table for pve port and uplink
vlanPrivateEdgeGroupIfIndexEntry row .1.3.6.1.4.1.4526.17.48.48.1
entry of pve
Indexes
Column Syntax OID
vlanPrivateEdgeGroupIfIndexID
specify the ifIndex group id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.48.48.1.1
vlanPrivateEdgeGroupIfIndexDomainID
specify the ifIndex group id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.48.48.1.2

vlanSubnetRangeTable

table
.1.3.6.1.4.1.4526.17.48.49 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanSubnetRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanSubnetRangeTable' 
A table that contains mappings from subnet
range to Group Identifiers used for
Port-and-subnet-based VLAN Classification.
vlanSubnetRangeEntry row .1.3.6.1.4.1.4526.17.48.49.1
A mapping from a subnet to a
Group Identifier.
Indexes
Column Syntax OID
vlanSubnetRangeAddr
The IP address of the range
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.48.49.1.1
vlanSubnetRangeMask
The numbers of continuous ones in the mask
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.4526.17.48.49.1.2
vlanSubnetRangeGroupId
Represents a group of subnets that are associated
together when assigning a VID to a frame.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4526.17.48.49.1.3
vlanSubnetRangeRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.49.1.4

vlanSubnetPortTable

table
.1.3.6.1.4.1.4526.17.48.50 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanSubnetPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanSubnetPortTable' 
A table that contains VID sets used for
Port-and-subnet-based VLAN Classification.
vlanSubnetPortEntry row .1.3.6.1.4.1.4526.17.48.50.1
A VID set for a port.
Indexes
Column Syntax OID
vlanSubnetPortGroupId
Designates a group of subnets in the
Group Database.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.4526.17.48.50.1.1
vlanSubnetPortGroupVid
The VID associated with a group of subnets for
each port.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.4526.17.48.50.1.2
vlanSubnetPortRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.50.1.3

vlanTriplePlayTable

table
.1.3.6.1.4.1.4526.17.48.51 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanTriplePlayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanTriplePlayTable' 
TriplePlay table, map CPE vlan to multicastTvVlan
vlanTriplePlayEntry row .1.3.6.1.4.1.4526.17.48.51.1
entry of TriplePlay table
Indexes
Column Syntax OID
vlanTriplePlayInnerVID
Specifies the CPE inner vlan.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.51.1.1
vlanTriplePlayMulticastTvVID
Specifies the multicast TV outer vlan.
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.51.1.2
vlanTriplePlayRowStatus
The row status variable, used according to
row creation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.51.1.3

vlanTriplePlayMulticastTvTable

table
.1.3.6.1.4.1.4526.17.48.52 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanTriplePlayMulticastTvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanTriplePlayMulticastTvTable' 
TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
vlanTriplePlayMulticatTvEntry row .1.3.6.1.4.1.4526.17.48.52.1
entry of triple play MulticastTv table
Indexes
Column Syntax OID
vlanTriplePlayMulticastTvMulticastTvVID
Specifies the multicast TV external vlan.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.52.1.1
vlanTriplePlayMulticastTvMulticastTvPortList
the multicast tv port list.
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.4526.17.48.52.1.2

vlanVoiceTable

table
.1.3.6.1.4.1.4526.17.48.54.2 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanVoiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanVoiceTable' 
A table containing static configuration information for
each voice VLAN configured into the device and dynamic port membership.
All entries are permanent and will
be restored after the device is reset.
vlanVoiceEntry row .1.3.6.1.4.1.4526.17.48.54.2.1
Information for a voice VLAN configured into the device by management.
Indexes
Column Syntax OID
vlanVoicePriority
An administratively assigned Priority, which will be used
for all traffic on the voice vlan, this gives the packets
the requested priority (CoS) within the bridge.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.4526.17.48.54.2.1.1
vlanVoicePriorityRemark
Remark VPT on tagged frames egress the voice vlan according.
to priority true.false
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.17.48.54.2.1.2
vlanVoiceRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.54.2.1.3

vlanVoiceOUITable

table
.1.3.6.1.4.1.4526.17.48.54.3 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanVoiceOUITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanVoiceOUITable' 
A table containing static global configuration information for Voice VLANs OUI MAC Prefixes.
All entries are permanent and will be restored after the device is reset.
vlanVoiceOUIEntry row .1.3.6.1.4.1.4526.17.48.54.3.1
Information for a voice VLANs OUI MAC Prefixes configured into the
device by management.
Indexes
Column Syntax OID
vlanVoiceOUIPrefix
The index value used to identify the OUI MAC Prefix component
associated with this entry.

The value of this object is used as an index to the
vlanVoiceOUITable.

Voice VLANs OUI Prefix is th…
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.4526.17.48.54.3.1.1
vlanVoiceOUIDescription
An optional text that describes the OUI.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4526.17.48.54.3.1.2
vlanVoiceOUIEntryRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.54.3.1.3

vlanVoicePortTable

table
.1.3.6.1.4.1.4526.17.48.54.4 · 1 row entry · 5 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanVoicePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanVoicePortTable' 
A table containing static and dynamic per port configuration information for Voice VLAN.
All entries are permanent and will be restored after the device is reset.
vlanVoicePortEntry row .1.3.6.1.4.1.4526.17.48.54.4.1
Static and dynamic per port information for a voice VLAN.
Indexes
Column Syntax OID
vlanVoicePortEnable
Enable this port to be a candidate to be added into the Voice VLAN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.17.48.54.4.1.1
vlanVoicePortVlanIndex
The Voice VLAN-ID the port is a candidate to be in.
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.54.4.1.2
vlanVoicePortSecure
Specify this port to be in Secure Mode when entering the Voice VLAN.
In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes
are accepted, otherwise dropped.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.17.48.54.4.1.3
vlanVoicePortCurrentMembership
Port's current status of membership in Voice VLAN.

Port's possible values of membership in Voice VLAN:
'Active(1)' - Port is currently added to a Voice VLAN .
'NotActive(2)' - Specifies either that p…
Enumeration
Enumerated Values:
1active
2notActive
 .1.3.6.1.4.1.4526.17.48.54.4.1.4
vlanVoicePortQosMode
Port's current QOS mode in Voice VLAN.
Possible values:
'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan.
'all(2)' - All traffic through that port received QOS of the Voice Vlan.
Enumerationr/w
Enumerated Values:
1src
2all
 .1.3.6.1.4.1.4526.17.48.54.4.1.5

vlanInetTriplePlayTable

table
.1.3.6.1.4.1.4526.17.48.56 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanInetTriplePlayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanInetTriplePlayTable' 
TriplePlay table, map CPE vlan to multicastTvVlan
vlanInetTriplePlayEntry row .1.3.6.1.4.1.4526.17.48.56.1
entry of TriplePlay table
Indexes
Column Syntax OID
vlanInetTriplePlayInetAddressType
Inet type IPv4/IPv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4526.17.48.56.1.1
vlanInetTriplePlayInnerVID
Specifies the CPE inner vlan.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.56.1.2
vlanInetTriplePlayMulticastTvVID
Specifies the multicast TV outer vlan.
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.56.1.3
vlanInetTriplePlayRowStatus
The row status variable, used according to
row creation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.56.1.4

vlanInetTriplePlayMulticastTvTable

table
.1.3.6.1.4.1.4526.17.48.57 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanInetTriplePlayMulticastTvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanInetTriplePlayMulticastTvTable' 
TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
vlanInetTriplePlayMulticatTvEntry row .1.3.6.1.4.1.4526.17.48.57.1
entry of triple play MulticastTv table
Indexes
Column Syntax OID
vlanInetTriplePlayMulticastTvMulticastTvVID
Specifies the multicast TV external vlan.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.57.1.1
vlanInetTriplePlayMulticastTvMulticastTvPortList
the multicast tv port list.
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.4526.17.48.57.1.2

vlanPrivateTable

table
.1.3.6.1.4.1.4526.17.48.59 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPrivateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPrivateTable' 
Private vlan table which contains the private vlan entries.
vlanPrivateEntry row .1.3.6.1.4.1.4526.17.48.59.1
Private vlan entry which contains the private vlan definition.
Indexes
Column Syntax OID
vlanPrivateVid
The static vlan ID which is set to one of the
private vlan types.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.59.1.1
vlanPrivateType
private vlan types:
none - Normal VLAN

primary - Carries traffic from promiscuous ports.
promiscuous port can communicate with all ports of the
same PVLAN, incl…
Enumerationr/w
Enumerated Values:
0none
1primary
2isolated
3community
 .1.3.6.1.4.1.4526.17.48.59.1.2
vlanPrivatePrimaryVid
The primary vlan ID which has defined in VlanPrivateEntry and which is
associated with secondary vlan (in vlanPrivateMapTable).
vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is
primary vlan.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.59.1.3
vlanPrivateStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.59.1.4

vlanPrivateMapTable

table
.1.3.6.1.4.1.4526.17.48.60 · 1 row entry · 7 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPrivateMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPrivateMapTable' 
Private vlan mapping table which contains the private vlan mapping entries.
vlanPrivateMapEntry row .1.3.6.1.4.1.4526.17.48.60.1
Private vlan mapping entry which contains the primary / secondary
private vlan association and their ports membership.
Indexes
Column Syntax OID
vlanPrivateMapPrimaryVid
The primary private vlan ID which is associated with the secondary
(isolated or community) vlan (vlanPrivateMapSecondaryVid).
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.60.1.1
vlanPrivateMapSecondaryVid
The secondary private vlan ID which is associated with the primary
vlan (vlanPrivateMapPrimaryVid).
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.60.1.2
vlanPrivateMapPrimaryPorts
The private vlan promiscuous ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.4526.17.48.60.1.3
vlanPrivateMapSecondaryPorts
The private vlan host ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.4526.17.48.60.1.4
vlanPrivateMapPrimaryOperPorts
The private vlan active promiscuous ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.4526.17.48.60.1.5
vlanPrivateMapSecondaryOperPorts
The private vlan active host ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.4526.17.48.60.1.6
vlanPrivateMapStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.60.1.7

vlanTrunkPortModeTable

table
.1.3.6.1.4.1.4526.17.48.61 · 1 row entry · 5 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanTrunkPortModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanTrunkPortModeTable' 
The tables contains trunk mode port entries.
vlanTrunkPortModeEntry row .1.3.6.1.4.1.4526.17.48.61.1
The entry contains port ifIndex,native vlan id and vlan list the port has a membership.
The vlan list can contain not created vlans.
Indexes
Column Syntax OID
vlanTrunkPortModeNativeVlanId
Indicated native vlan index.Default value 0
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.61.1.1
vlanTrunkModeList1to1024
vlan trunk mode list 1. Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.61.1.2
vlanTrunkModeList1025to2048
vlan trunk mode list 2. Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.61.1.3
vlanTrunkModeList2049to3072
vlan trunk mode list 3. Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.61.1.4
vlanTrunkModeList3073to4094
vlan trunk mode list 4. Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.61.1.5

vlanAccessPortModeTable

table
.1.3.6.1.4.1.4526.17.48.62 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanAccessPortModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanAccessPortModeTable' 
The tables contains access mode port entries.
vlanAccessPortModeEntry row .1.3.6.1.4.1.4526.17.48.62.1
The entry contains port ifIndex,access vlan id and multicast TV vlan id.
Indexes
Column Syntax OID
vlanAccessPortModeVlanId
Indicated access vlan id.Default value is 0
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.62.1.1
vlanAccessPortModeMcstTvVlanId
Indicated multicast TV vlan id.
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.62.1.2

vlanCustomerPortModeTable

table
.1.3.6.1.4.1.4526.17.48.63 · 1 row entry · 5 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanCustomerPortModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanCustomerPortModeTable' 
The tables contains customer mode port entries.
vlanCustomerPortModeEntry row .1.3.6.1.4.1.4526.17.48.63.1
The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id.
Indexes
Column Syntax OID
vlanCustomerPortModeVlanId
Indicated customer vlan id.Default value is 0
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.4526.17.48.63.1.1
vlanCustomerPortModeMtvList1to1024
vlan customer port mode multicast TV list 1. Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.63.1.2
vlanCustomerPortModeMtvList1025to2048
vlan customer port mode multicast TV list 2. Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.63.1.3
vlanCustomerPortModeMtvList2049to3072
vlan customer port mode multicast TV list 3. Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.63.1.4
vlanCustomerPortModeMtvList3073to4094
vlan customer port mode multicast TV list 4. Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.63.1.5

vlanSwitchPortModeTable

table
.1.3.6.1.4.1.4526.17.48.64 · 1 row entry · 1 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanSwitchPortModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanSwitchPortModeTable' 
The table defines L3/L2 port context.
vlanSwitchPortModeEntry row .1.3.6.1.4.1.4526.17.48.64.1
The entry contains port ifIndex and switch port enable value.
Indexes
Column Syntax OID
vlanSwitchPortModeCategory
Indicated if a port is switchport (l2 port) or no switchport (l3 port)
1 - switchport
2 - no switchport. Default is 1
Enumerationr/w
Enumerated Values:
1l2
2l3
 .1.3.6.1.4.1.4526.17.48.64.1.1

vlanPortModeContextTable

table
.1.3.6.1.4.1.4526.17.48.65 · 1 row entry · 1 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanPortModeContextTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanPortModeContextTable' 
The tables contains current port mode context entries.
vlanPortModeContextEntry row .1.3.6.1.4.1.4526.17.48.65.1
The entry contains current port mode context.
Indexes
Column Syntax OID
vlanPortModeContextValue
Indicated port context value:
0. Lag
1. Monitor
2. L3
3. RAVA
4. Dot1x
5. Dot1q
6. Access
7. Trunk
8. Customer
9. PV_promisc
10. PV_host
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.48.65.1.1

vlanRsvlMapTable

table
.1.3.6.1.4.1.4526.17.48.67 · 1 row entry · 3 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vlanRsvlMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::vlanRsvlMapTable' 
Shared vlan learning mapping table which contains the SVL mapping entries.
vlanRsvlMapEntry row .1.3.6.1.4.1.4526.17.48.67.1
SVL mapping entry which contains the primary / secondary
SVL association.
Indexes
Column Syntax OID
vlanRsvlMapPrimaryVid
The primary SVL ID which is associated with the secondary
shared vlan vlanRsvlMapSecondaryVid.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.67.1.1
vlanRsvlMapSecondaryVid
The secondary SVL ID which is associated with the primary
shared vlan vlanRsvlMapPrimaryVid.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.4526.17.48.67.1.2
vlanRsvlMapStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.48.67.1.3

rldot1qPortVlanStaticTable

table
.1.3.6.1.4.1.4526.17.48.68 · 1 row entry · 12 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rldot1qPortVlanStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::rldot1qPortVlanStaticTable' 
A table containing static vlan port membership information.
rldot1qPortVlanStaticEntry row .1.3.6.1.4.1.4526.17.48.68.1
Static vlan membership information per port
Indexes
Column Syntax OID
rldot1qPortVlanStaticEgressList1to1024
The port egress vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.1
rldot1qPortVlanStaticEgressList1025to2048
The port egress vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.2
rldot1qPortVlanStaticEgressList2049to3072
The port egress vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.3
rldot1qPortVlanStaticEgressList3073to4094
The port egress vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.4
rldot1qPortVlanStaticUntaggedEgressList1to1024
The port egress untagged vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.5
rldot1qPortVlanStaticUntaggedEgressList1025to2048
The port egress untagged vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.6
rldot1qPortVlanStaticUntaggedEgressList2049to3072
The port egress untagged vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.7
rldot1qPortVlanStaticUntaggedEgressList3073to4094
The port egress untagged vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.8
rldot1qPortVlanStaticForbiddenList1to1024
The port forbidden vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.9
rldot1qPortVlanStaticForbiddenList1025to2048
The port forbidden vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.10
rldot1qPortVlanStaticForbiddenList2049to3072
The port forbidden vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.11
rldot1qPortVlanStaticForbiddenList3073to4094
The port forbidden vlan static list.Default value is {0}
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.68.1.12

rldot1qVlanStaticListTable

table
.1.3.6.1.4.1.4526.17.48.69 · 1 row entry · 5 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rldot1qVlanStaticListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::rldot1qVlanStaticListTable' 
A table contains only one entry of a static vlan list.
rldot1qVlanStaticListEntry row .1.3.6.1.4.1.4526.17.48.69.1
Staticly created by local or network management vlan list
Indexes
Column Syntax OID
rldot1qVlanStaticListIndex
An index is entrie's sequence.
This field substitutes a vlan type.
If the vlan was created by user configuration then
the type is static.
If the vlan was created by GVRP/MVRP protocols then the type is dynamicGvrp.
If t…
Enumerationr/w
Enumerated Values:
0static
1dynamicGvrp
2dynamicRava
 .1.3.6.1.4.1.4526.17.48.69.1.1
rldot1qVlanStaticList1to1024
A list of staticaly created vlans from 1 to 1024.
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.69.1.2
rldot1qVlanStaticList1025to2048
A list of according to the type field created vlans from 1025 to 2048.
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.69.1.3
rldot1qVlanStaticList2049to3072
A list of according to the type field created vlans from 2049 to 3072.
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.69.1.4
rldot1qVlanStaticList3073to4094
A list of according to the type field created vlans from 3073 to 4094.
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.69.1.5

rldot1qVlanStaticNameTable

table
.1.3.6.1.4.1.4526.17.48.70 · 1 row entry · 1 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rldot1qVlanStaticNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::rldot1qVlanStaticNameTable' 
A table contains created by user vlans names.
rldot1qVlanStaticNameEntry row .1.3.6.1.4.1.4526.17.48.70.1
Staticly created by local or network management vlan list
Indexes
Column Syntax OID
rldot1qVlanStaticName
An administratively assigned string,which may be used
to identify the VLAN. The VLAN name must be unique or no name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4526.17.48.70.1.1

rlPortVlanTriplePlayMulticastTvTable

table
.1.3.6.1.4.1.4526.17.48.71 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlPortVlanTriplePlayMulticastTvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::rlPortVlanTriplePlayMulticastTvTable' 
A table saves a list of vlans per port/lag.
rlPortVlanTriplePlayMulticastTvEntry row .1.3.6.1.4.1.4526.17.48.71.1
Entry of Triple Play Multicast Tv table.
Indexes
Column Syntax OID
rlPortVlanTriplePlayMulticastTvList1to1024
A list of staticaly created Triple Play MTV vlans from 1 to 1024.
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.71.1.1
rlPortVlanTriplePlayMulticastTvList1025to2048
A list of staticaly created Triple Play MTV vlans from 1025 to 2048.
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.71.1.2
rlPortVlanTriplePlayMulticastTvList2049to3072
A list of staticaly created Triple Play MTV vlans from 2049 to 3072.
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.71.1.3
rlPortVlanTriplePlayMulticastTvList3073to4094
A list of staticaly created Triple Play MTV vlans from 3073 to 4094.
NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.4526.17.48.71.1.4

rldot1qVlanMembershipTypeTable

table
.1.3.6.1.4.1.4526.17.48.72 · 1 row entry · 1 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rldot1qVlanMembershipTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-vlan-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-vlan-MIB::rldot1qVlanMembershipTypeTable' 
A table contains a bitmap of the VLAN owners(applications) that can create the VLAN and/or add a port to the VLAN.
rldot1qVlanMembershipTypeEntry row .1.3.6.1.4.1.4526.17.48.72.1
Staticly or dynamicly created VLAN ID owner entry
Indexes
Column Syntax OID
rldot1qVlanMembershipTypeBitmap
This field contains a bitmap of owners that can creates and/or add a port
to the VLAN.
There exist three such type of owners :
Default VLAN
Manual created VLAN
Dynamic(RAVA)created VLAN
GVRP(MVRP)created VLAN
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.48.72.1.1