NETGEAR-RADLAN-rlIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
14
.1.3.6.1.4.1.4526.17.250.1 · 1 row entry · 14 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlIpAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-rlIP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-rlIP-MIB::rlIpAddressTable'
This table contains addressing information relevant to the
entity's interfaces.
          
in addition to ipAddressTable defined in standard MIB a represenattion of
IPv6 addresses based on additionl address origin such as EUI-64, general
prefix etc.
In this case the address information is partial address information.
Together with the address origin and the general prefix (when needed) user can
construct full address information.
          
The index (key) for this table includes this information additionally to the address.
rlIpAddressEntry row .1.3.6.1.4.1.4526.17.250.1.1
An address mapping for a particular interface.
Column Syntax OID
The address type of rlIpAddressAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4526.17.250.1.1.1
The IP address to which this entry's addressing information
pertains. The address type of this object is specified in
rlIpAddressAddrType.

In case of auto-configure address such as eui-64, general-prefix…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4526.17.250.1.1.2
The origin of the address.
RlIpAddressOriginTC
Type Values:
1other
2manual
4dhcp
5linklayer
6random
7autoConfig
8eui64
9tunnelIsatap
10tunnel6to4
11generalPrefix
.1.3.6.1.4.1.4526.17.250.1.1.3
The name assigned to the prefix.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.17.250.1.1.4
The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB…
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.4526.17.250.1.1.5
Extend standard field ipAddressType to multicast
Enumerationr/w
Enumerated Values:
1unicast
2anycast
3broadcast
4multicast
.1.3.6.1.4.1.4526.17.250.1.1.6
A pointer to the row in the prefix table to which this
address belongs. May be { 0 0 } if there is no such row.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.4526.17.250.1.1.7
The status of the address, describing if the address can be
used for communication.

In the absence of other information, an IPv4 address is
always preferred(1).
IP-MIBIpAddressStatusTCr/w
Type Values:
1preferred
2deprecated
3invalid
4inaccessible
5unknown
6tentative
7duplicate
8optimistic
.1.3.6.1.4.1.4526.17.250.1.1.8
The value of sysUpTime at the time this entry was created.
If this entry was created prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.4526.17.250.1.1.9
The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.4526.17.250.1.1.10
The status of this conceptual row.

The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effec…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4526.17.250.1.1.11
The storage type for this conceptual row. If this object
has a value of 'permanent', then no other objects are
required to be able to be modified.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.4526.17.250.1.1.12
The prefix length of this address.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4526.17.250.1.1.13
The Complete IP address to which this entry's addressing information
pertains.

In case of auto-configure address such as eui-64, general-prefix and others
it contains the complete address after appropriat…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4526.17.250.1.1.14