NETGEAR-RADLAN-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
11

rlTunnelIfTable

table
.1.3.6.1.4.1.4526.17.122.11.1 · 1 row entry · 5 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlTunnelIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-TUNNEL-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-TUNNEL-MIB::rlTunnelIfTable' 
This table is parallel to tunnelIfTable, and is used to
add/delete tunnel entries to/from that table.
In addition it contains private objects.
rlTunnelIfEntry row .1.3.6.1.4.1.4526.17.122.11.1.1
Additional configuration parameters for a tunnel interface.
Indexes
No indexes recorded
Column Syntax OID
rlTunnelIfEncapsMethod
The encapsulation method used by the tunnel.
This field added since it is read-only in standard MIB.
IANAifType-MIBIANAtunnelTyper/w
Type Values:
1other
2direct
3gre
4minimal
5l2tp
6pptp
7l2f
8udp
9atmp
10msdp
11sixToFour
12sixOverFour
13isatap
14teredo
15ipHttps
16softwireMesh
17dsLite
18aplusp
19ipsectunnelmode
 .1.3.6.1.4.1.4526.17.122.11.1.1.1
rlTunnelIfLocalAddressSource
Defines the method of obtaining Local address for
the tunnel interface.
Configured - configured by user.
Automatic - minimum IP address of the device.
Interface - minimum IP address on user specified interface.
Enumerationr/w
Enumerated Values:
1configured
2auto
3interface
 .1.3.6.1.4.1.4526.17.122.11.1.1.2
rlTunnelIfLocalAddressInterfaceId
Interface ID, used to determine Local address for tunnel interface
if rlTunnelIfLocalAddressSource set to interface.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.122.11.1.1.3
rlTunnelIfLocalIPv4Address
Specifies the IPv4 address currently used as IPv4 Local address
for IPv6 over IPv4 Tunnel.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.122.11.1.1.4
rlTunnelIfStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.122.11.1.1.5

rlTunnelIsatapConfTable

table
.1.3.6.1.4.1.4526.17.122.12.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlTunnelIsatapConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-TUNNEL-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-TUNNEL-MIB::rlTunnelIsatapConfTable' 
This table contains ISATAP-specific configuration.
rlTunnelIsatapConfEntry row .1.3.6.1.4.1.4526.17.122.12.1.1.1
Additional configuration parameters for a tunnel interface.
Indexes
Column Syntax OID
rlTunnelIsatapConfDnsName
DNS name.
OctetStringr/w .1.3.6.1.4.1.4526.17.122.12.1.1.1.1
rlTunnelIsatapConfRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.122.12.1.1.1.2

rlTunnelIsatapPrlTable

table
.1.3.6.1.4.1.4526.17.122.12.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlTunnelIsatapPrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-TUNNEL-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-TUNNEL-MIB::rlTunnelIsatapPrlTable' 
This table contains ISATAP-specific configuration.
rlTunnelIsatapPrlEntry row .1.3.6.1.4.1.4526.17.122.12.1.2.1
Additional configuration parameters for a tunnel interface.
Indexes
Column Syntax OID
rlTunnelIsatapPrlIfIndex
The index of the interface to which this PRL entry belongs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.122.12.1.2.1.1
rlTunnelIsatapPrlPriority
The priority of the entry. Lower value - higher priority.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.122.12.1.2.1.2
rlTunnelIsatapPrlAddress
IPv4 address of the potential router.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.122.12.1.2.1.3
rlTunnelIsatapPrlIsActive
Whether the PRL entry is active (meaning it has an up to date RA).
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.4526.17.122.12.1.2.1.4