NETGEAR-RADLAN-SNMP-MIB Table View

This table maps ip addresses to indices. The output index
is used as a component in some SNMPv3 tables fields (for example:
snmpTargetAddrName). Ipv4 addresses are not supported by this table.
Note: in getNext operations on this table, only mappings which are in use
in snmpTargetAddrTable (using rlTargetAddrMagicUsedInIndex) will be retreived.
The mapped index does not include delimiters which are forbidden
in SNMPv3 tag values (and thus can be used in tag fields).

rlSNMPv3IpAddrToIndexEntry row .1.3.6.1.4.1.4526.17.98.1.4.1

The row definition for this table.

Indexes

rlSNMPv3IpAddrToIndexAddrType rlSNMPv3IpAddrToIndexAddr

Column	Syntax	OID
rlSNMPv3IpAddrToIndexAddrType Type of NMS IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.17.98.1.4.1.1
rlSNMPv3IpAddrToIndexAddr NMS IP address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.17.98.1.4.1.2
rlSNMPv3IpAddrToIndexMappedIndex The index mapped for this row ip address.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.4526.17.98.1.4.1.3

This table extends rlTargetAddrExtEntry.

rlTargetAddrExtEntry row .1.3.6.1.4.1.4526.17.98.1.5.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rlTargetAddrMagicUsedInIndex Setting this field to a 4 octets length value means that ip mapping (using rlSNMPv3IpAddrToIndexTable) is used for this row. If such a mapping is not used, a 0-length octet string value should be used for this field (th…	OctetStringr/w Constraints: range: 0-0 range: 4-4	.1.3.6.1.4.1.4526.17.98.1.5.1.1

This table maps inet addresses to SNMPv3 engine identifiers.

rlInet2EngineIdEntry row .1.3.6.1.4.1.4526.17.98.1.6.1

The row definition for this table.

Indexes

rlInet2EngineIdAddressType rlInet2EngineIdAddress

Column	Syntax	OID
rlInet2EngineIdAddressType Inet address type of the mapped inet address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.17.98.1.6.1.1
rlInet2EngineIdAddress Mapped inet address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.17.98.1.6.1.2
rlInet2EngineIdEngineId The SNMPv3 engine id to which the address denoted by rlInet2EngineIdAddressType and rlInet2EngineIdAddress is mapped.	SNMP-FRAMEWORK-MIBSnmpEngineIDr/w Type Constraints: range: 5..32	.1.3.6.1.4.1.4526.17.98.1.6.1.3
rlInet2EngineIdStatus The management control for this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.98.1.6.1.4

This table extends usmUserEntry.

rlUsmUserExtEntry row .1.3.6.1.4.1.4526.17.98.1.8.1

The row definition for this table.

Indexes

No indexes recorded

Column	Syntax	OID
rlUsmUserAuthPassword Authentication password. Setting the field to a non zero-length value will convert the given password to a localized authentication key, appropriate to the corresponding usmUserAuthProtocol field. The key is localized u…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4526.17.98.1.8.1.1
rlUsmUserPrivPassword Privacy password. Setting the field to a non zero-length value will convert the given password to a localized privacy key, appropriate to the corresponding usmUserAuthProtocol field. The key is localized using the appro…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4526.17.98.1.8.1.2

A table for determining the Mrid for the current SNMP request.

rlSnmpRequestMridEntry row .1.3.6.1.4.1.4526.17.98.3.1

The row definition for this table.

Indexes

rlSnmpRequestManagedMrid

Column	Syntax	OID
rlSnmpRequestManagedMrid The router instance the NMS wants to manage in the current SNMP request. The value of this object, when attaching a variable instance of the rlSnmpRequestManagedMridTable to an SNMP request, will determine the managed M…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.98.3.1.1
rlSnmpRequestMridStatus The status of this entry.	Enumerationr/w Enumerated Values: 1 enable	.1.3.6.1.4.1.4526.17.98.3.1.2

The community table of the agent

rndCommunityInetEntry row .1.3.6.1.4.1.4526.17.98.5.1

The row definition for this table.

Indexes

rndCommunityInetMngStationAddrType rndCommunityInetMngStationAddr rndCommunityInetString

Column	Syntax	OID
rndCommunityInetMngStationAddrType Address type of the management station that will be allowed to communicate with the agent IP address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.17.98.5.1.1
rndCommunityInetMngStationAddr Address of the management station that will be allowed to communicate with the agent IP address	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.17.98.5.1.2
rndCommunityInetString The community string with which the management station will communicate with the agent	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.4526.17.98.5.1.3
rndCommunityInetAccess The allowed access to this management station	Enumerationr/w Enumerated Values: 1 readOnly 2 readWrite 3 super	.1.3.6.1.4.1.4526.17.98.5.1.4
rndCommunityInetTrapsEnable Should the agent send traps to the management station, and what version is required	Enumerationr/w Enumerated Values: 1 snmpV1 2 snmpV2 3 snmpV3 4 trapsDisable	.1.3.6.1.4.1.4526.17.98.5.1.5
rndCommunityInetStatus The status of this entry. If the status is invalid the community entry will be deleted	Enumerationr/w Enumerated Values: 1 enable 2 invalid	.1.3.6.1.4.1.4526.17.98.5.1.6
rndCommunityInetPortSecurity If enabled the device will only receive SNMP messages from the port, through which this NMS is reachable from the device.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4526.17.98.5.1.7
rndCommunityInetOwner The owner of this community	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4526.17.98.5.1.8
rndCommunityInetTrapDestPort The transport protocol (usually UDP) port to which traps to the management station represebted by this entry will be sent. The default is the well-known IANA assigned port number for SNMP traps. This object is relevant …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.4526.17.98.5.1.9
rndCommunityInetAltAddrType For testing purposes	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.17.98.5.1.10
rndCommunityInetAltAddr For testing purposes	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.17.98.5.1.11

The MRID related configurations table of the agent

rlMridInetEntry row .1.3.6.1.4.1.4526.17.98.6.1

The row definition for this table.

Indexes

rndCommunityInetMngStationAddrType rndCommunityInetMngStationAddr rndCommunityInetString

Column	Syntax	OID
rlMridInetConnection The router instance connecting the NMS who accessed the agent through the community table entry corresponding to the keys of this entry.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.98.6.1.1
rlInetManagedMrid The router instance currently managed by the NMS who accessed the agent through the community table entry corresponding to the keys of this entry	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.98.6.1.2

The table showing the events mask for each client.

rlEventsMaskEntry row .1.3.6.1.4.1.4526.17.98.7.4.1

The row definition for this table.

Indexes

rlEventsMaskPollerId

Column	Syntax	OID
rlEventsMaskPollerId The poller id whose events are shown in this table	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.98.7.4.1.1
rlEventsMaskMask The semantics of the rlEventsMask is an array of timestamps (each 4 octets containing one time stamp). Each timestamp is in TimeTicks units encoded in network order. Thus the mask can contain up to 40 timestamps. If a p…	OctetString	.1.3.6.1.4.1.4526.17.98.7.4.1.2

The table relating the events recorded to the indices in the rlEventsMask.

rlEventsEntry row .1.3.6.1.4.1.4526.17.98.7.5.1

The row definition for this table.

Indexes

rlEventsPoller rlEventId

Column	Syntax	OID
rlEventsPoller The poller id whose event definitions are shown in this table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.98.7.5.1.1
rlEventId The event id of the polled event. This is the notification object identifier (in case of a SNMPV2 notification) or the translation to SNMPv2 notation of an SNMPv1 trap according to the RFC 3584 (SNMP versions coexistenc…	ObjectIdentifier	.1.3.6.1.4.1.4526.17.98.7.5.1.2
rlEventIndexInMask Index in the rlEventsMaskMask of this poller id that has been allocated for this event by the device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.98.7.5.1.3
rlEventsStatus RowStatus for this table. Note that the device may refuse for resource shortage reasons to honour a create request for this poller even if apparently there still is room in his rlEventsMaskMask (i.e. the poller has requ…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.98.7.5.1.4

The polling control table for a poller. Currently contain only the polling interval.

rlEventsPollingControlEntry row .1.3.6.1.4.1.4526.17.98.7.6.1

The row definition for this table.

Indexes

rlEventsPollingControlPollerId

Column	Syntax	OID
rlEventsPollingControlPollerId The poller id whose polling controls are shown in this table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.98.7.6.1.1
rlEventsPollingControlPollingInterval The desired polling interval for this poller. If the device has determined that the poller has not polled the device for 3 times this polling interval it may destroy all the data related to this poller in the rlevents d…	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.98.7.6.1.2