NETGEAR-RADLAN-OSPF-MIB Table View

OSPF Instance General Variables

rlOspfGeneralGroupEntry row .1.3.6.1.4.1.4526.17.210.2.1

Information describing the configured global parame-
ters to the Router OSPF Process.

Indexes

rlOspfProcessId

Column	Syntax	OID
rlOspfProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.2.1.1
rlOspfRouterId A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. This object …	OSPF-MIBRouterIDr/w	.1.3.6.1.4.1.4526.17.210.2.1.2
rlOspfAdminStat The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. This object is persistent…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4526.17.210.2.1.3
rlOspfVersionNumber The current version number of the OSPF protocol is 2.	Enumeration Enumerated Values: 2 version2	.1.3.6.1.4.1.4526.17.210.2.1.4
rlOspfAreaBdrRtrStatus A flag to note whether this router is an Area Border Router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.5
rlOspfASBdrRtrStatus A flag to note whether this router is configured as an Autonomous System Border Router. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.6
rlOspfExternLsaCount The number of external (LS type-5) link state advertisements in the link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.2.1.7
rlOspfExternLsaCksumSum The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database and to c…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.2.1.8
rlOspfTOSSupport The router's support for type-of-service routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.9
rlOspfOriginateNewLsas The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the value of this counter can occur at re-i…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.2.1.10
rlOspfRxNewLsas The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuiti…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.2.1.11
rlOspfExtLsdbLimit The maximum number of non-default AS-external LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external LSAs in a …	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.4526.17.210.2.1.12
rlOspfMulticastExtensions A bit mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the multicast extensions to OSPF. Bit 0, if set, indicates that the router can fo…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.2.1.13
rlOspfExitOverflowInterval The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external LSAs. When set to 0, the router will not leave …	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.4526.17.210.2.1.14
rlOspfDemandExtensions The router's support for demand routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.15
rlOspfRFC1583Compatibility Indicates metrics used to choose among multiple AS-external LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external LSAs advertising the same destination. Whe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.16
rlOspfOpaqueLsaSupport The router's support for Opaque LSA types.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.17
rlOspfReferenceBandwidth Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent and when written the entity SHOULD save the chang…	kilobits per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.2.1.18
rlOspfRestartSupport The router's support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts. This object is persistent and when written the entity SH…	Enumerationr/w Enumerated Values: 1 none 2 plannedOnly 3 plannedAndUnplanned	.1.3.6.1.4.1.4526.17.210.2.1.19
rlOspfRestartInterval Configured OSPF graceful restart timeout interval. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.	secondsInteger32r/w Constraints: range: 1-1800	.1.3.6.1.4.1.4526.17.210.2.1.20
rlOspfRestartStrictLsaChecking Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.21
rlOspfRestartStatus Current status of OSPF graceful restart.	Enumeration Enumerated Values: 1 notRestarting 2 plannedRestart 3 unplannedRestart	.1.3.6.1.4.1.4526.17.210.2.1.22
rlOspfRestartAge Remaining time in current OSPF graceful restart interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.2.1.23
rlOspfRestartExitReason Describes the outcome of the last attempt at a graceful restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is currently underway.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.4526.17.210.2.1.24
rlOspfAsLsaCount The number of AS-scope link state advertisements in the AS-scope link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.2.1.25
rlOspfAsLsaCksumSum The 32-bit unsigned sum of the LS checksums of the AS link state advertisements contained in the AS-scope link state database. This sum can be used to determine if there has been a change in a router's AS-scope link st…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.2.1.26
rlOspfStubRouterSupport The router's support for stub router functionality.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.27
rlOspfStubRouterAdvertisement This object controls the advertisement of stub router LSAs by the router. The value doNotAdvertise will result in the advertisement of a standard router LSA and is the default value. This object is persi…	Enumerationr/w Enumerated Values: 1 doNotAdvertise 2 advertise	.1.3.6.1.4.1.4526.17.210.2.1.28
rlOspfDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.4526.17.210.2.1.29
rlOspfGeneralGroupStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.2.1.30
rlOspfLogAdjacencyChanges Configure the router to send a syslog message when an OSPF neighbor goes up or down. detail ? sends a syslog message for each state change, not just when a neighbor goes up or down	Enumerationr/w Enumerated Values: 1 enable 2 detail 3 disable	.1.3.6.1.4.1.4526.17.210.2.1.31
rlOspfPassiveInterface A flag to note whether to disable sending OSPF routing updates on all OSPF IP interfaces.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.32
rlOspfDefaultMetric A default metric helps solve the problem of redistributing routes with incompatible metrics. Whenever metrics do not convert, using a default metric provides a reasonable substitute and enables the redistribution to pro…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.2.1.33
rlOspfMaximumRedistPrefixNum Specifies the maximum number of IP prefixes that can be redistributed into OSPF.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.2.1.34
rlOspfMaximumRedistPrefixThreshold Threshold value, as a percentage, at which a warning message should be generated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.2.1.35
rlOspfMaximumRedistPrefixWarningOnly Causes a warning message to be logged when the number of prefixes defined by the maximum argumenthas been exceeded. Additional redistribution is not prevented.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.36
rlOspfOperStatus The current operational state of the OSPF in the router.	Enumeration Enumerated Values: 1 up 2 down 3 goingUp 4 goingDown 5 actFailed	.1.3.6.1.4.1.4526.17.210.2.1.37
rlOspfNextRouterId A 32-bit integer uniquely identifying the of router in the Autonomous System after restart. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.2.1.38
rlOspfRouterIdType Type of router identifier - default value or manually set by user.	RlOspfRouterIdType Type Values: 1 default 2 manual Description: The reason for exiting an attempted graceful restart.	.1.3.6.1.4.1.4526.17.210.2.1.39
rlOspfNextRouterIdType Type of router identifier after restart - default value or manually set by user.	RlOspfRouterIdType Type Values: 1 default 2 manual Description: The reason for exiting an attempted graceful restart.	.1.3.6.1.4.1.4526.17.210.2.1.40
rlOspfASBdrRtrActualStatus A flag to note whether this router is an Autonomous System Border Router. Note: rlOspfASBdrRtrStatus field is the configuration while this filed is the actual ASBR status	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.2.1.41
rlOspfCalcMaxDelay The maximum delay before the Routing Table is recalculated following a change to the Link State Database. (Recalculation is delayed to reduce the frequency of recalculations of the Routing Table). This p…	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.2.1.42
rlOspfRteMaxEqCostPaths The maximum number of equal cost paths that are stored for each destination in the Routing Table.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4526.17.210.2.1.43

Information describing the configured parameters and
cumulative statistics of the router's attached areas.
The interfaces and virtual links are configured
as part of these areas.  Area 0.0.0.0, by definition,
is the backbone area.

rlOspfAreaEntry row .1.3.6.1.4.1.4526.17.210.3.1

Information describing the configured parameters and
cumulative statistics of one of the router's attached areas.
The interfaces and virtual links are configured as part of
these areas. Area 0.0.0.0, by definition, is …

Indexes

rlOspfAreaProcessId rlOspfAreaId

Column	Syntax	OID
rlOspfAreaProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.3.1.1
rlOspfAreaId A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.3.1.2
rlOspfAuthType The authentication type specified for an area.	RlOspfAuthenticationTyper/w Type Values: 0 none 1 simplePassword 2 md5 9 null Description: The authentication type.	.1.3.6.1.4.1.4526.17.210.3.1.3
rlOspfImportAsExtern Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs import AS-external data as type-7 LSAs	Enumerationr/w Enumerated Values: 1 importExternal 2 importNoExternal 3 importNssa	.1.3.6.1.4.1.4526.17.210.3.1.4
rlOspfSpfRuns The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this coun…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.3.1.5
rlOspfAreaBdrRtrCount The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.3.1.6
rlOspfAsBdrRtrCount The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.3.1.7
rlOspfAreaLsaCount The total number of link state advertisements in this area's link state database, excluding AS-external LSAs.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.3.1.8
rlOspfAreaLsaCksumSum The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state advertisements. The sum can be used to determine if there ha…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.3.1.9
rlOspfAreaSummary The variable ospfAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will not originate summary LSAs into the stub…	Enumerationr/w Enumerated Values: 1 noAreaSummary 2 sendAreaSummary	.1.3.6.1.4.1.4526.17.210.3.1.10
rlOspfAreaStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.3.1.11
rlOspfAreaNssaTranslatorRole Indicates an NSSA border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.	Enumerationr/w Enumerated Values: 1 always 2 candidate	.1.3.6.1.4.1.4526.17.210.3.1.12
rlOspfAreaNssaTranslatorState Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has been set to alwa…	Enumeration Enumerated Values: 1 enabled 2 elected 3 disabled	.1.3.6.1.4.1.4526.17.210.3.1.13
rlOspfAreaNssaTranslatorStabilityInterval The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.	secondsOSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.4526.17.210.3.1.14
rlOspfAreaNssaTranslatorEvents Indicates the number of translator state changes that have occurred since the last boot-up. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at oth…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.3.1.15
rlOspfAreaAdminStat The OSPF Area's administrative status. The value formed on the area, and the in- terfaces associated with the area. The value 'disabled' denotes that the area is external to OSPF.	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4526.17.210.3.1.16
rlOspfAreaOperStatus The current operational state of the OSPF Area.	Enumeration Enumerated Values: 1 up 2 down 3 goingUp 4 goingDown 5 actFailed	.1.3.6.1.4.1.4526.17.210.3.1.17
rlOspfAreaFilterPrefixListIn The prefix list is applied to prefixes advertised to the specified area from other areas.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4526.17.210.3.1.18
rlOspfAreaFilterPrefixListOut The prefix list is applied to prefixes advertised out of the specified area to other areas.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4526.17.210.3.1.19

The set of metrics that will be advertised
by a default Area Border Router into a stub area.

rlOspfStubAreaEntry row .1.3.6.1.4.1.4526.17.210.4.1

The metric for a given Type of Service that
will be advertised by a default Area Border
Router into a stub area.

Information in this table is persistent and when this object
is written the entity SHOULD sav…

Indexes

rlOspfStubProcessId rlOspfStubAreaId rlOspfStubTOS

Column	Syntax	OID
rlOspfStubProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.4.1.1
rlOspfStubAreaId The 32-bit identifier for the stub area. On creation, this can be derived from the instance.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.4.1.2
rlOspfStubTOS The Type of Service associated with the metric. On creation, this can be derived from the instance.	OSPF-MIBTOSType Type Constraints: range: 0..30	.1.3.6.1.4.1.4526.17.210.4.1.3
rlOspfStubMetric The metric value applied at the indicated Type of Service. By default, this equals the least metric at the Type of Service among the interfaces to other areas.	OSPF-MIBBigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.4526.17.210.4.1.4
rlOspfStubStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.4.1.5
rlOspfStubMetricType This variable displays the type of metric advertised as a default route.	Enumerationr/w Enumerated Values: 1 ospfMetric 2 comparableCost 3 nonComparable	.1.3.6.1.4.1.4526.17.210.4.1.6

The OSPF Process's link state database (LSDB).
The LSDB contains the link state advertisements
from throughout the areas that the device is attached to.

rlOspfLsdbEntry row .1.3.6.1.4.1.4526.17.210.5.1

A single link state advertisement.

Indexes

rlOspfLsdbProcessId rlOspfLsdbAreaId rlOspfLsdbType rlOspfLsdbLsid rlOspfLsdbRouterId

Column	Syntax	OID
rlOspfLsdbProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.5.1.1
rlOspfLsdbAreaId The 32-bit identifier of the area from which the LSA was received.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.5.1.2
rlOspfLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Note: External link state advertisements are permitted for backward compatibility, but should be display…	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 5 asExternalLink 6 multicastLink 7 nssaExternalLink 10 areaOpaqueLink	.1.3.6.1.4.1.4526.17.210.5.1.3
rlOspfLsdbLsid The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.5.1.4
rlOspfLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.5.1.5
rlOspfLsdbSequence The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.5.1.6
rlOspfLsdbAge This field is the age of the link state advertisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.5.1.7
rlOspfLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.5.1.8
rlOspfLsdbAdvertisement The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.4526.17.210.5.1.9

The Address Range Table acts as an adjunct to the Area
Table.  It describes those Address Range Summaries that
are configured to be propagated from an Area to reduce
the amount of information about it that is known beyond
its borders.  It contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
          
Note that this table is obsoleted and is replaced
by the Area Aggregate Table.

rlOspfAreaRangeEntry row .1.3.6.1.4.1.4526.17.210.6.1

A single area address range.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

rlOspfAreaRangeProcessId rlOspfAreaRangeAreaId rlOspfAreaRangeNet

Column	Syntax	OID
rlOspfAreaRangeProcessIdobsolete A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.6.1.1
rlOspfAreaRangeAreaIdobsolete The area that the address range is to be found within.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.6.1.2
rlOspfAreaRangeNetobsolete The IP address of the net or subnet indicated by the range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.6.1.3
rlOspfAreaRangeMaskobsolete The subnet mask that pertains to the net or subnet.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.6.1.4
rlOspfAreaRangeStatusobsolete This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.6.1.5
rlOspfAreaRangeEffectobsolete Subnets subsumed by ranges either trigger the advertisement of the indicated summary (advertiseMatching) or result in the subnet's not being advertised at all outside the area.	Enumerationr/w Enumerated Values: 1 advertiseMatching 2 doNotAdvertiseMatching	.1.3.6.1.4.1.4526.17.210.6.1.6

The Host/Metric Table indicates what hosts are directly
attached to the router, what metrics and types
of service should be advertised for them,
and what areas they are found within.

rlOspfHostEntry row .1.3.6.1.4.1.4526.17.210.7.1

A metric to be advertised, for a given type of
service, when a given host is reachable.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volat…

Indexes

rlOspfHostProcessId rlOspfHostIpAddress rlOspfHostTOS

Column	Syntax	OID
rlOspfHostProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.7.1.1
rlOspfHostIpAddress The IP address of the host.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.7.1.2
rlOspfHostTOS The Type of Service of the route being configured.	OSPF-MIBTOSType Type Constraints: range: 0..30	.1.3.6.1.4.1.4526.17.210.7.1.3
rlOspfHostMetric The metric to be advertised.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.4526.17.210.7.1.4
rlOspfHostStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.7.1.5
rlOspfHostAreaIDdeprecated The OSPF area to which the host belongs. Deprecated by ospfHostCfgAreaID.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.7.1.6
rlOspfHostCfgAreaID To configure the OSPF area to which the host belongs.	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.4526.17.210.7.1.7

The OSPF Interface Table describes the interfaces
from the viewpoint of OSPF.
It augments the ipAddrTable with OSPF specific information.

rlOspfIfEntry row .1.3.6.1.4.1.4526.17.210.8.1

The OSPF interface entry describes one interface
from the viewpoint of OSPF.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

rlOspfIfProcessId rlOspfIfIpAddress rlOspfAddressLessIf

Column	Syntax	OID
rlOspfIfProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.8.1.1
rlOspfIfIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.8.1.2
rlOspfAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP addres…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4526.17.210.8.1.3
rlOspfIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.4526.17.210.8.1.4
rlOspfIfType The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies…	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint	.1.3.6.1.4.1.4526.17.210.8.1.5
rlOspfIfAdminStat The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4526.17.210.8.1.6
rlOspfIfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on t…	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.17.210.8.1.7
rlOspfIfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second.	secondsRlOspfUpToRefreshIntervalTCr/w Type Constraints: range: 1..65535 Description: The values one might be able to configure for variables bounded by the Refresh Interval.	.1.3.6.1.4.1.4526.17.210.8.1.8
rlOspfIfRetransInterval The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. Note…	secondsRlOspfUpToRefreshIntervalTCr/w Type Constraints: range: 1..65535 Description: The values one might be able to configure for variables bounded by the Refresh Interval.	.1.3.6.1.4.1.4526.17.210.8.1.9
rlOspfIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.4526.17.210.8.1.10
rlOspfIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attac…	secondsRlOspfDeadIntervalRangeTCr/w Type Constraints: range: 1..65535 Description: The range, in seconds, of dead interval value.	.1.3.6.1.4.1.4526.17.210.8.1.11
rlOspfIfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.	secondsOSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.4526.17.210.8.1.12
rlOspfIfState The OSPF Interface State.	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter	.1.3.6.1.4.1.4526.17.210.8.1.13
rlOspfIfDesignatedRouter The IP address of the designated router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.8.1.14
rlOspfIfBackupDesignatedRouter The IP address of the backup designated router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.8.1.15
rlOspfIfEvents The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.8.1.16
rlOspfIfAuthKey The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. …	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.4526.17.210.8.1.17
rlOspfIfStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.8.1.18
rlOspfIfMulticastForwarding The way multicasts should be forwarded on this interface: not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point-to-point and NBMA interf…	Enumerationr/w Enumerated Values: 1 blocked 2 multicast 3 unicast	.1.3.6.1.4.1.4526.17.210.8.1.19
rlOspfIfDemand Indicates whether Demand OSPF procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.8.1.20
rlOspfIfAuthType The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router.	RlOspfAuthenticationTyper/w Type Values: 0 none 1 simplePassword 2 md5 9 null Description: The authentication type.	.1.3.6.1.4.1.4526.17.210.8.1.21
rlOspfIfLsaCount The total number of link-local link state advertisements in this interface's link-local link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.8.1.22
rlOspfIfLsaCksumSum The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link st…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.8.1.23
rlOspfIfDesignatedRouterId The Router ID of the designated router.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.8.1.24
rlOspfIfBackupDesignatedRouterId The Router ID of the backup designated router.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.8.1.25
rlOspfIfOperStatus The current operational state of the OSPF interface.	Enumeration Enumerated Values: 1 up 2 down 3 goingUp 4 goingDown 5 actFailed	.1.3.6.1.4.1.4526.17.210.8.1.26
rlOspfIfAuthKeyChain The name of the authentication key-chain configured on this interface. The key-chain is a reference to which set of secret keys are to be accessed in order to determine which secret key string to use. The key chain n…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.4526.17.210.8.1.27
rlOspfIfPassive Indicates whether this interface is a passive interface. If set to TRUE, we suppress HELLO packets sent on and received from this interface. We will therefore advertise this interface in our LSAs but not run OSPF prot…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.8.1.28
rlOspfIfLsaRefreshIntvl Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval between refreshes of LSAs that are only flooded over this inter…	secondsInteger32r/w Constraints: range: 1-3599	.1.3.6.1.4.1.4526.17.210.8.1.29
rlOspfIfFastHelloMultiplier The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached to a common network, but it is advisable. Fast Hellos are…	RlOspfFastHelloMultiplierRanger/w Type Constraints: range: 3..20 Description: The range of hello multipliers that determine how often Fast Hellos are exchanged.	.1.3.6.1.4.1.4526.17.210.8.1.30
rlOspfIfMtuIgnore This object controls whether DC-OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description packet is higher than the MTU size configured on the incoming …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.8.1.31
rlOspfIfNameLookup A flag to note whether to look up Domain Name System (DNS) names for use in all OSPF show EXEC command displays.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.8.1.32
rlOspfIfIfIndex A 32-bit index identifying this interface, or zero if no index value is known. For interfaces having no IP Address this field is automatically set to the value of the address-less interface index field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.8.1.33
rlOspfIfActualAuthType The actual authentication type specified for an interface.	RlOspfAuthenticationType Type Values: 0 none 1 simplePassword 2 md5 9 null Description: The authentication type.	.1.3.6.1.4.1.4526.17.210.8.1.34

The Metric Table describes the metrics to be advertised
for a specified interface at the various types of service.
As such, this table is an adjunct of the OSPF Interface
Table.
          
Types of service, as defined by RFC 791, have the ability
to request low delay, high bandwidth, or reliable linkage.
          
For the purposes of this specification, the measure of
bandwidth:
          
Metric = referenceBandwidth / ifSpeed
          
is the default value.
The default reference bandwidth is 10^8.
For multiple link interfaces, note that ifSpeed is the sum
of the individual link speeds.  This yields a number having
the following typical values:
          
Network Type/bit rate   Metric
          
>= 100 MBPS                 1
Ethernet/802.3             10
E1                         48
T1 (ESF)                   65
64 KBPS                    1562
56 KBPS                    1785
19.2 KBPS                  5208
9.6 KBPS                   10416
          
Routes that are not specified use the default
(TOS 0) metric.
          
Note that the default reference bandwidth can be configured
using the general group object ospfReferenceBandwidth.

rlOspfIfMetricEntry row .1.3.6.1.4.1.4526.17.210.9.1

A particular TOS metric for a non-virtual interface
identified by the interface index.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volati…

Indexes

rlOspfIfMetricProcessId rlOspfIfMetricIpAddress rlOspfIfMetricAddressLessIf rlOspfIfMetricTOS

Column	Syntax	OID
rlOspfIfMetricProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.9.1.1
rlOspfIfMetricIpAddress The IP address of this OSPF interface. On row creation, this can be derived from the instance.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.9.1.2
rlOspfIfMetricAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the value of ifIndex for interfaces having no IP address. On row cre…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4526.17.210.9.1.3
rlOspfIfMetricTOS The Type of Service metric being referenced. On row creation, this can be derived from the instance.	OSPF-MIBTOSType Type Constraints: range: 0..30	.1.3.6.1.4.1.4526.17.210.9.1.4
rlOspfIfMetricValue The metric of using this Type of Service on this interface. The default value of the TOS 0 metric is 10^8 / ifSpeed.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.4526.17.210.9.1.5
rlOspfIfMetricStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.9.1.6

Information about this router's virtual interfaces
that the OSPF Process is configured to carry on.

rlOspfVirtIfEntry row .1.3.6.1.4.1.4526.17.210.10.1

Information about a single virtual interface.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

rlOspfVirtIfProcessId rlOspfVirtIfAreaId rlOspfVirtIfNeighbor

Column	Syntax	OID
rlOspfVirtIfProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.10.1.1
rlOspfVirtIfAreaId The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.10.1.2
rlOspfVirtIfNeighbor The Router ID of the virtual neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.10.1.3
rlOspfVirtIfTransitDelay The estimated number of seconds it takes to transmit a Link State update packet over this interface. Note that the minimal value SHOULD be 1 second.	secondsRlOspfUpToRefreshIntervalTCr/w Type Constraints: range: 1..65535 Description: The values one might be able to configure for variables bounded by the Refresh Interval.	.1.3.6.1.4.1.4526.17.210.10.1.4
rlOspfVirtIfRetransInterval The number of seconds between link state avertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. This…	secondsRlOspfUpToRefreshIntervalTCr/w Type Constraints: range: 1..65535 Description: The values one might be able to configure for variables bounded by the Refresh Interval.	.1.3.6.1.4.1.4526.17.210.10.1.5
rlOspfVirtIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.4526.17.210.10.1.6
rlOspfVirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neig…	secondsRlOspfDeadIntervalRangeTCr/w Type Constraints: range: 1..65535 Description: The range, in seconds, of dead interval value.	.1.3.6.1.4.1.4526.17.210.10.1.7
rlOspfVirtIfState OSPF virtual interface states.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.4.1.4526.17.210.10.1.8
rlOspfVirtIfEvents The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.10.1.9
rlOspfVirtIfAuthKey The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key len…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.4526.17.210.10.1.10
rlOspfVirtIfStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.10.1.11
rlOspfVirtIfAuthType The authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF router.	RlOspfAuthenticationTyper/w Type Values: 0 none 1 simplePassword 2 md5 9 null Description: The authentication type.	.1.3.6.1.4.1.4526.17.210.10.1.12
rlOspfVirtIfLsaCount The total number of link-local link state advertisements in this virtual interface's link-local link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.10.1.13
rlOspfVirtIfLsaCksumSum The 32-bit unsigned sum of the link state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be used to determine if there has been a change in the virtual int…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.10.1.14
rlOspfVirtIfAuthKeyChain The name of the authentication key-chain configured on this interface. The key-chain is a reference to which set of secret keys are to be accessed in order to determine which secret key string to use. The key chain n…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.4526.17.210.10.1.15
rlOspfVirtIfAdminStatus The desired administrative state of this virtual interface.	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4526.17.210.10.1.16
rlOspfVirtIfOperStatus The current operational state of this virtual interface.	Enumeration Enumerated Values: 1 up 2 down 3 goingUp 4 goingDown 5 actFailed	.1.3.6.1.4.1.4526.17.210.10.1.17
rlOspfVirtIfIndex The local index assigned by the OSPF Process to this OSPF virtual interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.10.1.18
rlOspfVirtIfActualAuthType The actual authentication type specified for a virtual interface.	RlOspfAuthenticationType Type Values: 0 none 1 simplePassword 2 md5 9 null Description: The authentication type.	.1.3.6.1.4.1.4526.17.210.10.1.19

A table describing all non-virtual neighbors
in the locality of the OSPF router.

rlOspfNbrEntry row .1.3.6.1.4.1.4526.17.210.11.1

The information regarding a single neighbor.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

rlOspfNbrProcessId rlOspfNbrIpAddr rlOspfNbrAddressLessIndex

Column	Syntax	OID
rlOspfNbrProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.11.1.1
rlOspfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.11.1.2
rlOspfNbrAddressLessIndex On an interface having an IP address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4526.17.210.11.1.3
rlOspfNbrRtrId A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.11.1.4
rlOspfNbrOptions A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.11.1.5
rlOspfNbrPriority The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.17.210.11.1.6
rlOspfNbrState The state of the relationship with this neighbor.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.4526.17.210.11.1.7
rlOspfNbrEvents The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at othe…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.11.1.8
rlOspfNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.11.1.9
rlOspfNbmaNbrStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.11.1.10
rlOspfNbmaNbrPermanence This variable displays the status of the entry; 'dynamic' and 'permanent' refer to how the neighbor became known.	Enumeration Enumerated Values: 1 dynamic 2 permanent	.1.3.6.1.4.1.4526.17.210.11.1.11
rlOspfNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.11.1.12
rlOspfNbrRestartHelperStatus Indicates whether the router is acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.4526.17.210.11.1.13
rlOspfNbrRestartHelperAge Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.11.1.14
rlOspfNbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.4526.17.210.11.1.15
rlOspfNbrDeadTime The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, this value is always set to 1. If the oper_status is down or o…	OSPF-MIBPositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.4526.17.210.11.1.16
rlOspfNbrAreaId The area to which the neighbor belongs. If the oper_status is down, then this value is set to zero and the field is not valid.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.11.1.17
rlOspfNbrIfIndex The interface index to whitch the neighbor is connected.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.11.1.18
rlOspfNbrIfIpAddr The interface IP address to whitch the neighbor is connected.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.11.1.19

This table describes all virtual neighbors.
Since virtual links are configured
in the Virtual Interface Table, this table is read-only.

rlOspfVirtNbrEntry row .1.3.6.1.4.1.4526.17.210.12.1

Virtual neighbor information.

Indexes

rlOspfVirtNbrProcessId rlOspfVirtNbrArea rlOspfVirtNbrRtrId

Column	Syntax	OID
rlOspfVirtNbrProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.12.1.1
rlOspfVirtNbrArea The Transit Area Identifier.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.12.1.2
rlOspfVirtNbrRtrId A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.12.1.3
rlOspfVirtNbrIpAddr The IP address this virtual neighbor is using.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.12.1.4
rlOspfVirtNbrOptions A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.12.1.5
rlOspfVirtNbrState The state of the virtual neighbor relationship.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.4526.17.210.12.1.6
rlOspfVirtNbrEvents The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other tim…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.12.1.7
rlOspfVirtNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.12.1.8
rlOspfVirtNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.17.210.12.1.9
rlOspfVirtNbrRestartHelperStatus Indicates whether the router is acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.4526.17.210.12.1.10
rlOspfVirtNbrRestartHelperAge Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.12.1.11
rlOspfVirtNbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.4526.17.210.12.1.12
rlOspfVirtNbrDeadTime The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, this value is always set to 1. If the oper_status is down or o…	OSPF-MIBPositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.4526.17.210.12.1.13

The Area Aggregate Table acts as an adjunct
to the Area Table.  It describes those address aggregates
that are configured to be propagated from an area.
Its purpose is to reduce the amount of information
that is known beyond an Area's borders.
          
It contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, a class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
          
Note that if ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
and 10.1.0.0 mask 255.255.0.0),
the most specific match is the preferred one.

rlOspfAreaAggregateEntry row .1.3.6.1.4.1.4526.17.210.14.1

A single area aggregate entry.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

rlOspfAreaAggregateProcessId rlOspfAreaAggregateAreaID rlOspfAreaAggregateLsdbType rlOspfAreaAggregateNet rlOspfAreaAggregateMask

Column	Syntax	OID
rlOspfAreaAggregateProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.14.1.1
rlOspfAreaAggregateAreaID The area within which the address aggregate is to be found.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.14.1.2
rlOspfAreaAggregateLsdbType The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to.	Enumeration Enumerated Values: 3 summaryLink 7 nssaExternalLink	.1.3.6.1.4.1.4526.17.210.14.1.3
rlOspfAreaAggregateNet The IP address of the net or subnet indicated by the range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.14.1.4
rlOspfAreaAggregateMask The subnet mask that pertains to the net or subnet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.14.1.5
rlOspfAreaAggregateStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.210.14.1.6
rlOspfAreaAggregateEffect Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at all outside the area.	Enumerationr/w Enumerated Values: 1 advertiseMatching 2 doNotAdvertiseMatching	.1.3.6.1.4.1.4526.17.210.14.1.7
rlOspfAreaAggregateExtRouteTag External route tag to be included in NSSA (type-7) LSAs.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.14.1.8

The OSPF Process's link-local link state database
for non-virtual links.
This table is identical to the OSPF LSDB Table
in format, but contains only link-local Link State
Advertisements for non-virtual links.  The purpose is
to allow link-local LSAs to be displayed for each
non-virtual interface.  This table is implemented to
support type-9 LSAs that are defined
in 'The OSPF Opaque LSA Option'.

rlOspfLocalLsdbEntry row .1.3.6.1.4.1.4526.17.210.18.1

A single link state advertisement.

Indexes

rlOspfLocalLsdbProcessId rlOspfLocalLsdbIpAddress rlOspfLocalLsdbAddressLessIf rlOspfLocalLsdbType rlOspfLocalLsdbLsid rlOspfLocalLsdbRouterId

Column	Syntax	OID
rlOspfLocalLsdbProcessId Identifies this OSPF entity.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.18.1.1
rlOspfLocalLsdbIpAddress The IP address of the interface from which the LSA was received if the interface is numbered.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.18.1.2
rlOspfLocalLsdbAddressLessIf The interface index of the interface from which the LSA was received if the interface is unnumbered.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4526.17.210.18.1.3
rlOspfLocalLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format.	Enumeration Enumerated Values: 9 localOpaqueLink	.1.3.6.1.4.1.4526.17.210.18.1.4
rlOspfLocalLsdbLsid The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.18.1.5
rlOspfLocalLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.18.1.6
rlOspfLocalLsdbSequence The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.18.1.7
rlOspfLocalLsdbAge This field is the age of the link state advertisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.18.1.8
rlOspfLocalLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.18.1.9
rlOspfLocalLsdbAdvertisement The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.4526.17.210.18.1.10
rlOspfLocalLsdbAreaId The OSPF area in which the link belongs.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.18.1.11

The OSPF Process's link-local link state database
for virtual links.
          
This table is identical to the OSPF LSDB Table
in format, but contains only link-local Link State
Advertisements for virtual links.  The purpose is to
allow link-local LSAs to be displayed for each virtual
interface.  This table is implemented to support type-9 LSAs
that are defined in 'The OSPF Opaque LSA Option'.

rlOspfVirtLocalLsdbEntry row .1.3.6.1.4.1.4526.17.210.19.1

A single link state advertisement.

Indexes

rlOspfVirtLocalLsdbProcessId rlOspfVirtLocalLsdbTransitArea rlOspfVirtLocalLsdbNeighbor rlOspfVirtLocalLsdbType rlOspfVirtLocalLsdbLsid rlOspfVirtLocalLsdbRouterId

Column	Syntax	OID
rlOspfVirtLocalLsdbProcessId Identifies this OSPF entity.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.19.1.1
rlOspfVirtLocalLsdbTransitArea The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.19.1.2
rlOspfVirtLocalLsdbNeighbor The Router ID of the virtual neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.19.1.3
rlOspfVirtLocalLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format.	Enumeration Enumerated Values: 9 localOpaqueLink	.1.3.6.1.4.1.4526.17.210.19.1.4
rlOspfVirtLocalLsdbLsid The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.19.1.5
rlOspfVirtLocalLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.19.1.6
rlOspfVirtLocalLsdbSequence The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.19.1.7
rlOspfVirtLocalLsdbAge This field is the age of the link state advertisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.19.1.8
rlOspfVirtLocalLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.17.210.19.1.9
rlOspfVirtLocalLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.4526.17.210.19.1.10

Router Link State Advertisement.

rlOspfBrRouterEntry row .1.3.6.1.4.1.4526.17.210.26.1.1

A single entry from Router LSA.

Indexes

rlOspfBrRouterProcessId rlOspfBrRouterAreaId rlOspfBrRouterRouterId rlOspfBrRouterNextHopIp rlOspfBrRouterOutIf

Column	Syntax	OID
rlOspfBrRouterProcessId A 32-bit integer uniquely identifying an OSPF process.	RlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.4526.17.210.26.1.1.1
rlOspfBrRouterAreaId The 32 bit identifier of the Route Area.	OSPF-MIBAreaID	.1.3.6.1.4.1.4526.17.210.26.1.1.2
rlOspfBrRouterRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.4526.17.210.26.1.1.3
rlOspfBrRouterNextHopIp The Hext Hop IP Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.17.210.26.1.1.4
rlOspfBrRouterOutIf The outgoing interface toward the destination.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4526.17.210.26.1.1.5
rlOspfBrRouterRouteType intra is intra-area route. inter is inter-area route.	Enumeration Enumerated Values: 1 intra 2 inter	.1.3.6.1.4.1.4526.17.210.26.1.1.6
rlOspfBrRouterRouteCost Cost of using this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.17.210.26.1.1.7
rlOspfBrRouterRouterType The border router type: ABR, ASBR or both ABR and ASBR.	Enumeration Enumerated Values: 1 abr 2 asbr 3 both	.1.3.6.1.4.1.4526.17.210.26.1.1.8