NETGEAR-RADLAN-IpRouter Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
86

rsRip2IfConfTable

table
.1.3.6.1.4.1.4526.17.26.3.1 · 1 row entry · 9 columns
Open in standard view 
This table is extension of rip2IfConfTable (RFC 1724 ,RIP 2)
rsRip2IfConfEntry entry .1.3.6.1.4.1.4526.17.26.3.1.1
The row definition for this table.
Indexes
rsRip2IfConfAddress
Column Syntax OID
rsRip2IfConfAddress
The IP Address of this system on the indicated subnet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.3.1.1.1
rsRip2IfConfVirtualDis
This variable defines the virtual number of hops assigned to
the interface specified by rsIfIpAddrIndex. This enables
fine-tuning of the RIP routing algorithm.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.3.1.1.2
rlRip2IfConfKeyChain
Name of the key-chain which rip2
interface uses for md5 authentication
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.26.3.1.1.3
rlRip2IfConfAdminStatus
This variable defines administrative status of RIP interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.17.26.3.1.1.4
rlRip2IfConfInFilteringType
Type of Rx filtering (ACL, Prefix List etc).
Enumerationr/w
Enumerated Values:
1none
2stdIpAcl
3pefixList
 .1.3.6.1.4.1.4526.17.26.3.1.1.5
rlRip2IfConfOutFilteringType
Type of Tx filtering (ACL, Prefix List etc).
Enumerationr/w
Enumerated Values:
1none
2stdIpAcl
3pefixList
 .1.3.6.1.4.1.4526.17.26.3.1.1.6
rlRip2IfConfInFilterListName
Name of a filtering list. The list defines
which networks are to be received and which
are to be suppressed in routing updates.
List type is defined by rlRip2IfConfFilteringType.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.26.3.1.1.7
rlRip2IfConfOutFilterListName
Name of a filtering list. The list defines
which networks are to be sent and which
are to be suppressed.
List type is defined by rlRip2IfConfFilteringType.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.26.3.1.1.8
rlRip2IfConfDefInfOriginate
if set to global RIP behavior is specified by the value of
rlRip2GlobalDefaultInformationOriginate scalar
if set to enabled RIP will advertise default route on this interfaces
if set to passiveOnly RIP will advertise de…
Enumerationr/w
Enumerated Values:
1global
2disabled
3enabled
4passiveOnly
 .1.3.6.1.4.1.4526.17.26.3.1.1.9

ipRedundRoutersTable

table
.1.3.6.1.4.1.4526.17.26.6.3 · 1 row entry · 6 columns
Open in standard view 
List of IP addresses backed up by this router.
ipRedundRoutersEntry entry .1.3.6.1.4.1.4526.17.26.6.3.1
The row definition for this table.
Indexes
ipRedundRoutersIfAddr ipRedundRoutersMainRouterAddr
Column Syntax OID
ipRedundRoutersIfAddr
The Ip address of the IP interface on which the redundancy feature
is operational.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.6.3.1.1
ipRedundRoutersMainRouterAddr
The Ip address of the polled main router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.6.3.1.2
ipRedundRoutersOperStatus
If active, the main router is considered inoperational and the IP
interface operates as its backup.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.4526.17.26.6.3.1.3
ipRedundRoutersPollInterval
Polling interval for this router (in seconds). If 0 the router is not
polled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.6.3.1.4
ipRedundRoutersTimeout
Interval in seconds during which the backed-up router must signal.
If it does not signal, it is considered inoperational and the IP
interface starts operating as backup.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.6.3.1.5
ipRedundRoutersStatus
Entry status
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4526.17.26.6.3.1.6

rsIpRipFilterGlbTable

table
.1.3.6.1.4.1.4526.17.26.8.1 · 1 row entry · 7 columns
Open in standard view 
The table of RIP global filters per IP router.
rsIpRipFilterGlbEntry entry .1.3.6.1.4.1.4526.17.26.8.1.1
An entry in the RIP global filter table
Indexes
rsIpRipFilterGlbType rsIpRipFilterGlbNumber
Column Syntax OID
rsIpRipFilterGlbType
Type of filter - input/output
Enumeration
Enumerated Values:
1input
2output
 .1.3.6.1.4.1.4526.17.26.8.1.1.1
rsIpRipFilterGlbNumber
Number of RIP filter.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.8.1.1.2
rsIpRipFilterGlbStatus
The validity of this entry. Setting this value to invalid deletes
the entry, and the entry may be actualy removed from the table.
Enumerationr/w
Enumerated Values:
1valid
2invalid
3underCreation
 .1.3.6.1.4.1.4526.17.26.8.1.1.3
rsIpRipFilterGlbIpAddr
network prefix IP address, as in the forwarding table.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.8.1.1.4
rsIpRipFilterGlbNetworkMaskBits
the number of bits in the IP Network mask, called network-prefix-length
in Router Requirements terminology. for example: the value 16 means
mask 255.255.0.0
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.8.1.1.5
rsIpRipFilterGlbMatchBits
the number of bits to match in the Network IP address. A value
smaller than 32 defines a wildcard. for example: the value 8 means
all routes whose leftmost 8 bits are equal to those of the network IP
address. If this va…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.8.1.1.6
rsIpRipFilterGlbAction
Filter action - permit/deny for this network
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.4526.17.26.8.1.1.7

rsIpRipFilterLclTable

table
.1.3.6.1.4.1.4526.17.26.8.2 · 1 row entry · 8 columns
Open in standard view 
Table of input/output  RIP filters used per IP Interface.
rsIpRipFilterLclEntry entry .1.3.6.1.4.1.4526.17.26.8.2.1
An entry in the Intf RIP filter table
Indexes
rsIpRipFilterLclIpIntf rsIpRipFilterLclType rsIpRipFilterLclNumber
Column Syntax OID
rsIpRipFilterLclIpIntf
The IP address identifying the RIP interface for this filter.
This value corresponds to rsIpAdEntAddr.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.8.2.1.1
rsIpRipFilterLclType
Type of filter - input/output
Enumeration
Enumerated Values:
1input
2output
 .1.3.6.1.4.1.4526.17.26.8.2.1.2
rsIpRipFilterLclNumber
Number of RIP filter for this Interface
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.8.2.1.3
rsIpRipFilterLclStatus
The validity of this entry. Setting this value to invalid deletes
the entry, and the entry may be actualy removed from the table.
Enumerationr/w
Enumerated Values:
1valid
2invalid
3underCreation
 .1.3.6.1.4.1.4526.17.26.8.2.1.4
rsIpRipFilterLclIpAddr
network prefix IP address, as in the forwarding table.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.8.2.1.5
rsIpRipFilterLclNetworkMaskBits
the number of bits in the IP Network mask, called network-prefix-length
in Router Requirements terminology. for example: the value 16 means
mask 255.255.0.0
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.8.2.1.6
rsIpRipFilterLclMatchBits
the number of bits to match in the Network IP address. A value
smaller than 32 defines a wildcard. for example: the value 8 means
all routes whose leftmost 8 bits are equal to those of the network IP
address. If this va…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.8.2.1.7
rsIpRipFilterLclAction
Filter action - permit/deny
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.4526.17.26.8.2.1.8

rlOspfIfExtTable

table
.1.3.6.1.4.1.4526.17.26.14.3 · 1 row entry · 1 columns
Open in standard view 
The OSPF Interface Table describes the
interfaces from the viewpoint of OSPF.
rlOspfIfExtEntry entry .1.3.6.1.4.1.4526.17.26.14.3.1
The OSPF interface table extension
for md5 authentication
Indexes
No indexes recorded
Column Syntax OID
rlOspfifKeyChain
Name of the key-chain which ospf
interface uses for md5 authentication
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.26.14.3.1.1

rlOspfRtrLnkTable

table
.1.3.6.1.4.1.4526.17.26.14.4 · 1 row entry · 16 columns
Open in standard view 
Router Link State Advertisement.
rlOspfRtrLnkEntry entry .1.3.6.1.4.1.4526.17.26.14.4.1
A single entry from Router LSA.
Indexes
rlOspfRtrLnkAreaId rlOspfRtrLnkLsid rlOspfRtrLnkRouterId rlOspfRtrLnkIdx
Column Syntax OID
rlOspfRtrLnkAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.4526.17.26.14.4.1.1
rlOspfRtrLnkLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.4.1.2
rlOspfRtrLnkRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.4526.17.26.14.4.1.3
rlOspfRtrLnkIdx
The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.26.14.4.1.4
rlOspfRtrLnkSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.4.1.5
rlOspfRtrLnkAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.4.1.6
rlOspfRtrLnkChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.4.1.7
rlOspfRtrLnkLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.4.1.8
rlOspfRtrLnkBitV
When set, the router is an endpoint
of one or more fully adjacent virtual
links having the described area as Transit
area (V is for virtual link endpoint).
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.26.14.4.1.9
rlOspfRtrLnkBitE
When set, the router is an AS
boundary router (E is for external).
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.26.14.4.1.10
rlOspfRtrLnkBitB
When set, the router is an area
border router (B is for border).
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.26.14.4.1.11
rlOspfRtrLnkLinks
The number of router links described in this LSA.
This must be the total collection of router links
(i.e., interfaces) to the area.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.4.1.12
rlOspfRtrLnkLinkID
Identifies the object that this router link
connects to. Value depends on the link's Type.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.4.1.13
rlOspfRtrLnkLinkData
Value depends on the link's Type field.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.4.1.14
rlOspfRtrLnkType
A quick description of the router link.
Enumeration
Enumerated Values:
1pointToPoint
2transitNetwork
3stubNetwork
4virtualLink
 .1.3.6.1.4.1.4526.17.26.14.4.1.15
rlOspfRtrLnkMetric
The cost of using this router link.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.4.1.16

rlOspfNetLnkTable

table
.1.3.6.1.4.1.4526.17.26.14.5 · 1 row entry · 10 columns
Open in standard view 
Network Link State Advertisement.
rlOspfNetLnkEntry entry .1.3.6.1.4.1.4526.17.26.14.5.1
A single entry from Network LSA.
Indexes
rlOspfNetLnkAreaId rlOspfNetLnkLsid rlOspfNetLnkRouterId rlOspfNetLnkIdx
Column Syntax OID
rlOspfNetLnkAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.4526.17.26.14.5.1.1
rlOspfNetLnkLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.5.1.2
rlOspfNetLnkRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.4526.17.26.14.5.1.3
rlOspfNetLnkIdx
The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.26.14.5.1.4
rlOspfNetLnkSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.5.1.5
rlOspfNetLnkAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.5.1.6
rlOspfNetLnkChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.5.1.7
rlOspfNetLnkLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.5.1.8
rlOspfNetLnkMask
The IP address mask for the network.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.5.1.9
rlOspfNetLnkAttRouter
The Router IDs of each of the routers
attached to the network.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.5.1.10

rlOspfSumLnkTable

table
.1.3.6.1.4.1.4526.17.26.14.6 · 1 row entry · 9 columns
Open in standard view 
Summary Link State Advertisement
for network (Type 3).
rlOspfSumLnkEntry entry .1.3.6.1.4.1.4526.17.26.14.6.1
A single entry from Summary LSA.
Indexes
rlOspfSumLnkAreaId rlOspfSumLnkLsid rlOspfSumLnkRouterId
Column Syntax OID
rlOspfSumLnkAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.4526.17.26.14.6.1.1
rlOspfSumLnkLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.6.1.2
rlOspfSumLnkRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.4526.17.26.14.6.1.3
rlOspfSumLnkSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.6.1.4
rlOspfSumLnkAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.6.1.5
rlOspfSumLnkChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.6.1.6
rlOspfSumLnkLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.6.1.7
rlOspfSumLnkMask
Value depends on the link's Type field.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.6.1.8
rlOspfSumLnkMetric
The cost of using this router link.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.6.1.9

rlOspfAsbLnkTable

table
.1.3.6.1.4.1.4526.17.26.14.7 · 1 row entry · 8 columns
Open in standard view 
Summary Link State Advertisement
for ASBR (Type 4).
rlOspfAsbLnkEntry entry .1.3.6.1.4.1.4526.17.26.14.7.1
A single entry from Summary LSA.
Indexes
rlOspfAsbLnkAreaId rlOspfAsbLnkLsid rlOspfAsbLnkRouterId
Column Syntax OID
rlOspfAsbLnkAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.4526.17.26.14.7.1.1
rlOspfAsbLnkLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.7.1.2
rlOspfAsbLnkRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.4526.17.26.14.7.1.3
rlOspfAsbLnkSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.7.1.4
rlOspfAsbLnkAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.7.1.5
rlOspfAsbLnkChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.7.1.6
rlOspfAsbLnkLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.7.1.7
rlOspfAsbLnkMetric
The cost of using this router link.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.7.1.8

rlOspfAseLnkTable

table
.1.3.6.1.4.1.4526.17.26.14.8 · 1 row entry · 11 columns
Open in standard view 
External Link State Advertisement.
rlOspfAseLnkEntry entry .1.3.6.1.4.1.4526.17.26.14.8.1
A single entry from External LSA.
Indexes
rlOspfAseLnkLsid rlOspfAseLnkRouterId
Column Syntax OID
rlOspfAseLnkLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.8.1.1
rlOspfAseLnkRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.4526.17.26.14.8.1.2
rlOspfAseLnkSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.8.1.3
rlOspfAseLnkAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.8.1.4
rlOspfAseLnkChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.26.14.8.1.5
rlOspfAseLnkLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.8.1.6
rlOspfAseLnkMask
Value depends on the link's Type field.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.8.1.7
rlOspfAseLnkFrwAddress
Data traffic for the advertised destination
will be forwarded to this address. If the
Forwarding address is set to 0.0.0.0, data
traffic will be forwarded instead to the LSA's
originator (i.e., the responsible AS bounda…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.26.14.8.1.8
rlOspfAseLnkBitE
The type of external metric. If bit E is set,
the metric specified is a Type 2 external metric.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.26.14.8.1.9
rlOspfAseLnkMetric
The cost of this route.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.8.1.10
rlOspfAseLnkTag
A 32-bit field attached to each external route.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.26.14.8.1.11

rlospfVirtIfExtTable

table
.1.3.6.1.4.1.4526.17.26.14.9 · 1 row entry · 1 columns
Open in standard view 
The Virtual Interface Table describes the virtual
links that the OSPF Process is configured to carry on.
rlospfVirtIfExtEntry entry .1.3.6.1.4.1.4526.17.26.14.9.1
The OSPF virtual interface table
extension for md5 authentication
Indexes
No indexes recorded
Column Syntax OID
rlospfVirtifKeyChain
Name of the key-chain which ospf virtual
interface uses for md5 authentication
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.26.14.9.1.1