NETGEAR-RADLAN-CDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

rlCdpCountersTable

table

.1.3.6.1.4.1.4526.17.137.4 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlCdpCountersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-CDP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-CDP-MIB::rlCdpCountersTable'

This table contains all cdp counter values, indexed by conter name

rlCdpCountersEntry row .1.3.6.1.4.1.4526.17.137.4.1

The row definition for this table.

Indexes

rlCdpCountersName

Column Syntax OID

rlCdpCountersName

counter name used as key for counters table

RlCdpCounterTypes

Type Values:

1	totalInputPackets
2	v1InputPackets
3	v2InputPackets
4	totalOutputPackets
5	v1OutputPackets
6	v2OutputPackets
7	illegalChksum
8	errorPackets
9	maxNeighborsExceededInMainCache
10	maxNeighborsExceededInSecondaryCache

.1.3.6.1.4.1.4526.17.137.4.1.1

rlCdpCountersValue

the value of the counter name specisifed by rlCdpCountersName, unsuppo
will have no entry in the tab.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.137.4.1.2

rlCdpCacheTable

table

.1.3.6.1.4.1.4526.17.137.8 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlCdpCacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-CDP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-CDP-MIB::rlCdpCacheTable'

The (conceptual) table contains externtion for the cdpCache table.
indexed by cdpCacheEntry.

rlCdpCacheEntry row .1.3.6.1.4.1.4526.17.137.8.1

The row definition for this table.

Indexes

No indexes recorded

Column Syntax OID

rlCdpCacheVersionExt

This field contains the extention of the cdpCacheVersion field
in the cdpCache table.
In case the neighbour advertised the SW TLV as a string with length
larger than 160, this field contains the chacters from place 160 …

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.137.8.1.1

rlCdpCacheTimeToLive

This field indicates the time remains in seconds
till the entry should be expried.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.137.8.1.2

rlCdpCacheCdpVersion

This field indicates the cdp version that was reported in the most recent CDP
message.

RlCdpVersionTypes

Type Values:

1	version-v1
2	version-v2

.1.3.6.1.4.1.4526.17.137.8.1.3

rlCdpSecondaryCacheTable

table

.1.3.6.1.4.1.4526.17.137.12 · 1 row entry · 10 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlCdpSecondaryCacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-CDP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-CDP-MIB::rlCdpSecondaryCacheTable'

The (conceptual) table contains partial information from cdpCache table.
indexed by rlCdpSecondaryCacheEntry.

rlCdpSecondaryCacheEntry row .1.3.6.1.4.1.4526.17.137.12.1

An entry (conceptual row) in the rlCdpSecondaryCacheTable,
containing partial information received via CDP on one
interface from one device. Entries appear when
a CDP advertisement is received from a neighbor
device. …

Indexes

cdpCacheIfIndex cdpCacheDeviceIndex

Column Syntax OID

rlCdpSecondaryCacheMacAddress

The MAC address of the neighbor.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.4526.17.137.12.1.3

rlCdpSecondaryCachePlatform

The Device's Hardware Platform prefix, as reported in the most
recent CDP message. The zero-length string indicates
that no Platform field (TLV) was reported in the most
recent CDP message.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.137.12.1.4

rlCdpSecondaryCacheCapabilities

The Device's Functional Capabilities as reported in the
most recent CDP message.

OctetString

Constraints:
range: 0-4

.1.3.6.1.4.1.4526.17.137.12.1.5

rlCdpSecondaryCacheVoiceVlanID

The remote device's VoIP VLAN ID, as reported in the
most recent CDP message. This object is not instantiated if
no Appliance VLAN-ID field (TLV) was reported in the most
recently received CDP message.

Unsigned32

Constraints:
range: 0-4095

.1.3.6.1.4.1.4526.17.137.12.1.6

rlCdpSecondaryCacheTimeToLive

This field indicates the number of seconds
till the entry is expried.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.137.12.1.7

rlCdpSecondaryCachePowerAvailable

The remote device's available power, as reported in the
most recent CDP message.
A value of 0xFFFFFFFF indicates that no Power Available TLV
was reported in the most recently received CDP message.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.137.12.1.8

rlCdpSecondaryCachePowerConsumption

The remote device's consumed power, as reported in the
most recent CDP message.
A value of 0xFFFFFFFF indicates that no Power Consumption TLV
was reported in the most recently received CDP message.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.137.12.1.9

rlCdpSecondaryCacheSparePairPoECapabilities

The remote device's Spare-Pair (4-wire) Power-Over-Ethernet negotiation capabilities.
The bit 'supported(0)' indicates that the device supports Spare Pair POE.
The bit 'detectionClassificationRequired(1)' indicates that…

Bits

Enumerated Values:

0	supported
1	detectionClassificationRequired
2	desiredState
3	operationalState

.1.3.6.1.4.1.4526.17.137.12.1.10

rlCdpSecondaryCacheDeviceId

The remote device's Device-ID prefix, as reported in the most
recent CDP message. The zero-length string indicates
that no Device-ID TLV was reported in the most recent CDP message.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.137.12.1.11

rlCdpSecondaryCachePortId

The remote device's Port-ID prefix, as reported in the most
recent CDP message. The zero-length string indicates
that no Port-ID TLV was reported in the most recent CDP message.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.137.12.1.12

rlCdpTlvTable

table

.1.3.6.1.4.1.4526.17.137.16 · 1 row entry · 28 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlCdpTlvTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-CDP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-CDP-MIB::rlCdpTlvTable'

The (conceptual) table contains the local advertised information.
indexed by rlCdpTlvEntry.

rlCdpTlvEntry row .1.3.6.1.4.1.4526.17.137.16.1

An entry (conceptual row) in the rlCdpTlvTable,
containing local information advertised by CDP on one
interface. Entries are available only when CDP is globally enabled,
for interfaces on which CDP is enabled and the in…

Indexes

rlCdpTlvIfIndex

Column Syntax OID

rlCdpTlvIfIndex

The ifIndex value of the local interface.
A value of zero is used to access TLVs which do not
changed between interfaces.

Unsigned32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.4526.17.137.16.1.1

rlCdpTlvDeviceIdFormat

An indication of the format of Device-Id contained in the
corresponding instance of rlCdpTlvDeviceId.

serialNumber(1) indicates that the value of rlCdpTlvDeviceId
object is in the form of an ASCII string …

Enumeration

Enumerated Values:

1	serialNumber
2	macAddress
3	other

.1.3.6.1.4.1.4526.17.137.16.1.2

rlCdpTlvDeviceId

The Device-ID string as will be advertised in subsequent CDP
messages.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.137.16.1.3

rlCdpTlvAddress1Type

The Inet address type of rlCdpTlvAddress1

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.4526.17.137.16.1.4

rlCdpTlvAddress1

The (first) network-layer address of the device
as will be advertised in the Address TLV of subsequent
CDP messages. For example, if the corresponding instance of
rlCdpTlvAddress1Type had the value 'ipv4(1)', then this…

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4526.17.137.16.1.5

rlCdpTlvAddress2Type

The Inet address type of rlCdpTlvAddress2

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.4526.17.137.16.1.6

rlCdpTlvAddress2

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4526.17.137.16.1.7

rlCdpTlvAddress3Type

The Inet address type of rlCdpTlvAddress3

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.4526.17.137.16.1.8

rlCdpTlvAddress3

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4526.17.137.16.1.9

rlCdpTlvPortId

The Port-ID string as will be advertised in subsequent CDP messages from
this interface. This will typically be the value of the ifName
object (e.g., 'Ethernet0').

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.137.16.1.10

rlCdpTlvCapabilities

The Device's Functional Capabilities as will be advertised in
subsequent CDP messages. For latest set of specific
values, see the latest version of the CDP specification.

OctetString

Constraints:
range: 0-4

.1.3.6.1.4.1.4526.17.137.16.1.11

rlCdpTlvVersion

The Version string as will be advertised in subsequent CDP messages.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.137.16.1.12

rlCdpTlvPlatform

The Device's Hardware Platform as will be advertised in subsequent
CDP messages.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.137.16.1.13

rlCdpTlvNativeVLAN

The local device's interface's native VLAN, as will be
advertised in subsequent CDP messages.

Unsigned32

Constraints:
range: 0-4095

.1.3.6.1.4.1.4526.17.137.16.1.14

rlCdpTlvDuplex

The local device's interface's duplex mode, as will be advertised
in subsequent CDP messages.

Enumeration

Enumerated Values:

1	unknown
2	halfduplex
3	fullduplex

.1.3.6.1.4.1.4526.17.137.16.1.15

rlCdpTlvApplianceID

The local device's Appliance ID, as will be advertised in subsequent
CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be
advertised in subsequent CDP messages.

Unsigned32

Constraints:
range: 0-255

.1.3.6.1.4.1.4526.17.137.16.1.16

rlCdpTlvApplianceVlanID

The local device's VoIP VLAN ID, as will be advertised in subsequent
CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be
advertised in subsequent CDP messages.

Unsigned32

Constraints:
range: 0-4095

.1.3.6.1.4.1.4526.17.137.16.1.17

rlCdpTlvExtendedTrust

The local device's interface's extended trust mode, as will be advertised
in subsequent CDP messages. A value of zero indicates the absence of extended
trust.

Enumeration

Enumerated Values:

0	untrusted
1	trusted

.1.3.6.1.4.1.4526.17.137.16.1.18

rlCdpTlvCosForUntrustedPorts

The COS value with which all packets received on an
untrusted port should be marked by a simple switching device
which cannot itself classify individual packets.
This TLV only has any meaning if corresponding instance o…

Unsigned32

Constraints:
range: 0-255

.1.3.6.1.4.1.4526.17.137.16.1.19

rlCdpTlvPowerAvailableRequestId

The Power Available TLV Request-ID field echoes the Request-ID field
last received in a Power Requested TLV. It is 0 if no Power Requested TLV
has been received since the interface last transitioned to ifOperState == U…

Unsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.4526.17.137.16.1.20

rlCdpTlvPowerAvailablePowerManagementId

The Power Available TLV Power-Management-ID field.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.4526.17.137.16.1.21

rlCdpTlvPowerAvailable

The Power Available TLV Available-Power field indicates the
number of milliwatts of power available to powered devices at the
time this object is instatiated.
A value of 0xFFFFFFFF indicates that the Power Available TL…

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.137.16.1.22

rlCdpTlvPowerAvailableManagementPowerLevel

The Power Available TLV Management-Power-Level field indicates the
number of milliwatts representing the supplier's request to the powered
device for its Power Consumption TLV. A value of 0xFFFFFFFF indicates
the local …

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.137.16.1.23

rlCdpTlvSysName

The sysName MIB as will be advertised in subsequent CDP messages.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.137.16.1.24

rlCdpTlvPowerConsumption

The value of Power Consumption TLV indicates the maximum amount of
power, in milliwatts, expected to be obtained and consumed from
the interface over which the CDP packet is sent.
A value of 0xFFFFFFFF indicates the TL…

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.137.16.1.25

rlCdpTlvPowerRequestedRequestId

The Power Requested TLV Request-ID field.
A value of zero indicates that the Power Requested TLV is not advertised.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.137.16.1.26

rlCdpTlvPowerRequestedPowerManagementId

The Power Requested TLV Power-Management-ID field echoes the Management-
Power-ID field in the last received Power Available TLV, or to 0,
if no Power Available TLV has been received.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.137.16.1.27

rlCdpTlvSparePairPoECapabilities

The capabilities advertised in the Spare-Pair POE TLV.
The bit 'supported(0)' indicates that the device supports Spare Pair POE.
The bit 'detectionClassificationRequired(1)' indicates that the device requires
detection/…

Bits

Enumerated Values:

0	supported
1	detectionClassificationRequired
2	desiredState
3	operationalState

.1.3.6.1.4.1.4526.17.137.16.1.28

rlCdpInterfaceCountersTable

table

.1.3.6.1.4.1.4526.17.137.19 · 1 row entry · 11 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlCdpInterfaceCountersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-CDP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-CDP-MIB::rlCdpInterfaceCountersTable'

This table contains all CDP counter values, indexed by interface id.

rlCdpInterfaceCountersEntry row .1.3.6.1.4.1.4526.17.137.19.1

The row definition for this table.

Indexes

rlCdpInterfaceId

Column	Syntax	OID
rlCdpInterfaceId Interface id, used as index for interface counters table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.4526.17.137.19.1.1`
rlCdpInterfaceTotalInputPackets Num of received packets on rlCdpInterfaceId	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.2`
rlCdpInterfaceV1InputPackets Num of v1 received packets on rlCdpInterfaceId	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.3`
rlCdpInterfaceV2InputPackets Num of v2 received packets on rlCdpInterfaceId	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.4`
rlCdpInterfaceTotalOutputPackets Num of sent packets from rlCdpInterfaceId	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.5`
rlCdpInterfaceV1OutputPackets Num of v1 sent packets from rlCdpInterfaceId	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.6`
rlCdpInterfaceV2OutputPackets Num of v2 sent packets from rlCdpInterfaceId	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.7`
rlCdpInterfaceIllegalChksum Num of received packets with illegal CDP checksum.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.8`
rlCdpInterfaceErrorPackets specifies the number of received CDP packets with other error (duplicated TLVs, illegal TLVs, etc.)	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.9`
rlCdpInterfaceMaxNeighborsExceededInMainCache specifies the number of times a CDP neighbor could not be stored in the main cache.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.10`
rlCdpInterfaceMaxNeighborsExceededInSecondaryCache specifies the number of times a CDP neighbor could not be stored in the secondary cache.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.137.19.1.11`

rlCdpTlvPowerRequestTable

table

.1.3.6.1.4.1.4526.17.137.21 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlCdpTlvPowerRequestTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-CDP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-CDP-MIB::rlCdpTlvPowerRequestTable'

The (conceptual) table contains the local advertised requested power levels
in Power Requested TLV.
indexed by rlCdpTlvPowerRequestEntry.

rlCdpTlvPowerRequestEntry row .1.3.6.1.4.1.4526.17.137.21.1

An entry (conceptual row) in the rlCdpTlvPowerRequestTable,
containing locally requested power levels advertised by CDP on one
interface. Entries are available only when CDP is globally enabled,
for interfaces on which …

Indexes

rlCdpTlvIfIndex rlCdpTlvPowerRequestPowerLevelIndex

Column	Syntax	OID
rlCdpTlvPowerRequestPowerLevelIndex An index to the list of Requested-Power-Level in Power Requested TLV.	Unsigned32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.4526.17.137.21.1.2`
rlCdpTlvPowerRequestPowerLevel A possible value of the Power Consumption TLV, in milliwatts	Unsigned32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.4526.17.137.21.1.3`

rlCdpSecondaryCacheAddressTable

table

.1.3.6.1.4.1.4526.17.137.22 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlCdpSecondaryCacheAddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-CDP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-CDP-MIB::rlCdpSecondaryCacheAddressTable'

The (conceptual) table containing the list of
network-layer addresses of a neighbor interface,
as reported in the Address TLV of the most recently
received CDP message and stored in the secondary cache.

rlCdpSecondaryCacheAddressEntry row .1.3.6.1.4.1.4526.17.137.22.1

An entry (conceptual row) in the rlCdpSecondaryCacheAddressTable,
containing the list of network-layer addresses of a neighbor interface,
as reported in the Address TLV of the most recently received CDP message
and s…

Indexes

cdpCacheIfIndex cdpCacheDeviceIndex rlCdpSecondaryCacheAddressIndex

Column	Syntax	OID
rlCdpSecondaryCacheAddressIndex The index of the address entry for a given cdpCacheIfIndex,cdpCacheDeviceIndex pair.	Integer32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.4526.17.137.22.1.3`
rlCdpSecondaryCacheAddressType An indication of the type of address contained in the corresponding instance of rlCdpSecondaryCacheAddress		`.1.3.6.1.4.1.4526.17.137.22.1.4`
rlCdpSecondaryCacheAddress A network-layer address of the device as reported in the most recent CDP message's Address TLV. For example, if the the corresponding instance of rlCdpSecondaryCacheAddressType had the value 'ip(1)', then this object …		`.1.3.6.1.4.1.4526.17.137.22.1.5`

rlCdpSecondaryCacheRequestedPowerTable

table

.1.3.6.1.4.1.4526.17.137.23 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlCdpSecondaryCacheRequestedPowerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-CDP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-CDP-MIB::rlCdpSecondaryCacheRequestedPowerTable'

The (conceptual) table containing the list of
requested power levels by a remote device,
as reported in the Power Requested TLV of the most recently
received CDP message and stored in the secondary cache.

rlCdpSecondaryCacheRequestedPowerEntry row .1.3.6.1.4.1.4526.17.137.23.1

An entry (conceptual row) in the rlCdpSecondaryCacheRequestedPowerTable,
containing the list of requested power levels by a remote device,
as reported in the Power Requested TLV of the most recently received CDP messag…

Indexes

cdpCacheIfIndex cdpCacheDeviceIndex rlCdpSecondaryCacheRequestedPowerIndex

Column	Syntax	OID
rlCdpSecondaryCacheRequestedPowerIndex The index of the requested power level entry for a given cdpCacheIfIndex,cdpCacheDeviceIndex pair.	Integer32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.4526.17.137.23.1.3`
rlCdpSecondaryCacheRequestedPowerLevel A requested power level in the Power Requested TLV, in milliwatts.	Unsigned32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.4526.17.137.23.1.4`