NETGEAR-RADLAN-AGGREGATEVLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
6

rlAggregateVlanTable

table
.1.3.6.1.4.1.4526.17.73.2 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlAggregateVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-AGGREGATEVLAN-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-AGGREGATEVLAN-MIB::rlAggregateVlanTable' 
The table creates an aggregateVlans, the IfIndex is from 10000
rlAggregateVlanEntry row .1.3.6.1.4.1.4526.17.73.2.1
The row definition for this table.
Indexes
Column Syntax OID
rlAggregateVlanIndex
This index indicate the aggrigateVlan id, the aggregate
vlan index is starting from 10000
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4526.17.73.2.1.1
rlAggregateVlanName
The name of the aggregateVlan
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4526.17.73.2.1.2
rlAggregateVlanPhysAddressType
This variable indicates whether the physical address assigned to this
VLAN should be the default one or be chosen from the set of
reserved physical addresses of the device.
Enumerationr/w
Enumerated Values:
1default
2reserve
 .1.3.6.1.4.1.4526.17.73.2.1.3
rlAggregateVlanStatus
The status of the aggregateVlan table entry. It's used to delete an entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.73.2.1.4

rlAggregateSubVlanTable

table
.1.3.6.1.4.1.4526.17.73.3 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlAggregateSubVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-AGGREGATEVLAN-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-AGGREGATEVLAN-MIB::rlAggregateSubVlanTable' 
The table indicates all the allocated sub-vlans to the
aggregateVlans, an entry in the rlAggregateVlanTable must
be exist before allocating the subVlans
rlAggregateSubVlanEntry row .1.3.6.1.4.1.4526.17.73.3.1
The row definition for this table.
Indexes
Column Syntax OID
rlAggregateSubVlanIfIndex
Indicate the subVlan that allocated to the aggregate vlan
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4526.17.73.3.1.1
rlAggregateSubVlanStatus
The status of the aggregateSubVlan table entry.
It's used to delete an entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.73.3.1.2