NETGEAR-QOS-AUTOVOIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
15

agentAutoVoIPTable

table
.1.3.6.1.4.1.4526.10.3.4.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk agentAutoVoIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-QOS-AUTOVOIP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-QOS-AUTOVOIP-MIB::agentAutoVoIPTable' 
A table providing configuration of Auto VoIP Profile.
agentAutoVoIPEntry row .1.3.6.1.4.1.4526.10.3.4.1.5.1
Auto VoIP Profile configuration for a port.
Indexes
Column Syntax OID
agentAutoVoIPIntfIndex
This is a unique index for an entry in the
agentAutoVoIPTable. A non-zero value indicates
the ifIndex for the corresponding interface entry
in the ifTable. A value of zero represents global
configuration, which …
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4526.10.3.4.1.5.1.1
agentAutoVoIPProtocolMode
Enables / disables AutoVoIP Protocol profile on an interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.10.3.4.1.5.1.2
agentAutoVoIPOUIMode
Enables / disables AutoVoIP OUI profile on an interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.10.3.4.1.5.1.3
agentAutoVoIPProtocolPortStatus
AutoVoIP protocol profile operational status of an interface.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.4526.10.3.4.1.5.1.4
agentAutoVoIPOUIPortStatus
AutoVoIP OUI profile operational status of an interface.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.4526.10.3.4.1.5.1.5

agentAutoVoIPOUITable

table
.1.3.6.1.4.1.4526.10.3.4.1.6 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk agentAutoVoIPOUITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-QOS-AUTOVOIP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-QOS-AUTOVOIP-MIB::agentAutoVoIPOUITable' 
A table providing configuration of Auto VoIP Profile.
agentAutoVoIPOUIEntry row .1.3.6.1.4.1.4526.10.3.4.1.6.1
Auto VoIP Profile OUI configuration.
Indexes
Column Syntax OID
agentAutoVoIPOUIIndex
The Auto VoIP OUI table index.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.4526.10.3.4.1.6.1.1
agentAutoVoIPOUI
The Organizationally Unique Identifier (OUI), as defined
in IEEE std 802-2001, is a 24 bit (three octets) globally
unique assigned number referenced by various standards,
of the information received from the remote syst…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.4526.10.3.4.1.6.1.2
agentAutoVoIPOUIDesc
The Description of the Organizationally Unique Identifier (OUI),
as defined in IEEE std 802-2001(up to 32 characters)
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4526.10.3.4.1.6.1.3
agentAutoVoIPOUIRowStatus
The row status variable is used according to installation and removal conventions for conceptual rows.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.10.3.4.1.6.1.4

agentAutoVoIPSessionTable

table
.1.3.6.1.4.1.4526.10.3.4.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk agentAutoVoIPSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-QOS-AUTOVOIP-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-QOS-AUTOVOIP-MIB::agentAutoVoIPSessionTable' 
A table providing configuration of Auto VoIP Profile.
agentAutoVoIPSessionEntry row .1.3.6.1.4.1.4526.10.3.4.1.7.1
Auto VoIP Session Table.
Indexes
Column Syntax OID
agentAutoVoIPSessionIndex
The Auto VoIP session index.
Integer32
Constraints:
range: 0-127
 .1.3.6.1.4.1.4526.10.3.4.1.7.1.1
agentAutoVoIPSourceIP
The source IP address of the VoIP session.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.10.3.4.1.7.1.2
agentAutoVoIPDestinationIP
The destination IP address of the VoIP session.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.10.3.4.1.7.1.3
agentAutoVoIPSourceL4Port
The source L4 Port of the VoIP session.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.10.3.4.1.7.1.4
agentAutoVoIPDestinationL4Port
The destination L4 Port of the VoIP session.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.10.3.4.1.7.1.5
agentAutoVoIPProtocol
The Protocol of the VoIP session.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.10.3.4.1.7.1.6