NEMO-MIB
Copyright (c) 2009 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
- Redistributions of source code must retain the above
copyright notice, this list of conditions and the
following disclaimer.
- Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or
other materials provided with the distribution.
- Neither the name of Internet Society, IETF or IETF
Trust, nor the names of specific contributors, may be
used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
This version of this MIB module is part of RFC 5488;
see the RFC itself for full legal notices.
- Source file
NEMO-MIB- Last revised
- Identity
nemoMIB- Base OID
1.3.6.1.2.1.184
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| MOBILEIPV6-MIB | mip6BindingCacheEntry mip6BindingHomeAddress mip6BindingHomeAddressType mip6MnBLCOA mip6MnBLCOAType mip6MnBLEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'NEMO-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'NEMO-MIB::nemoMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEMO-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEMO-MIB::nemoMIB'
Objects (84)
Showing 84 of 84 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.184 |
||
.1.3.6.1.2.1.184.0 |
||
.1.3.6.1.2.1.184.1 |
||
.1.3.6.1.2.1.184.1.1 |
||
.1.3.6.1.2.1.184.1.1.1 |
||
|
Bits
|
.1.3.6.1.2.1.184.1.1.1.1 |
|
|
|
Enumeration
|
.1.3.6.1.2.1.184.1.1.1.2 |
.1.3.6.1.2.1.184.1.1.2 |
||
.1.3.6.1.2.1.184.1.1.2.1 |
||
.1.3.6.1.2.1.184.1.1.2.1.1 |
||
.1.3.6.1.2.1.184.1.1.2.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.184.1.1.2.1.1.2 |
|
.1.3.6.1.2.1.184.1.1.3 |
||
.1.3.6.1.2.1.184.1.1.4 |
||
.1.3.6.1.2.1.184.1.1.4.1 |
||
.1.3.6.1.2.1.184.1.2 |
||
.1.3.6.1.2.1.184.1.2.1 |
||
.1.3.6.1.2.1.184.1.2.1.1 |
||
.1.3.6.1.2.1.184.1.2.1.1.1 |
||
.1.3.6.1.2.1.184.1.2.1.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.184.1.2.1.1.1.2 |
|
.1.3.6.1.2.1.184.1.2.1.1.1.3 |
||
|
secondsSNMPv2-SMIGauge32
|
.1.3.6.1.2.1.184.1.2.1.1.1.4 |
|
.1.3.6.1.2.1.184.1.2.2 |
||
.1.3.6.1.2.1.184.1.2.2.1 |
||
.1.3.6.1.2.1.184.1.2.2.2 |
||
.1.3.6.1.2.1.184.1.2.2.3 |
||
.1.3.6.1.2.1.184.1.2.2.4 |
||
.1.3.6.1.2.1.184.1.2.2.5 |
||
.1.3.6.1.2.1.184.1.2.2.6 |
||
.1.3.6.1.2.1.184.1.2.2.7 |
||
.1.3.6.1.2.1.184.1.2.3 |
||
.1.3.6.1.2.1.184.1.2.3.1 |
||
.1.3.6.1.2.1.184.1.2.3.1.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.184.1.2.3.1.1.1 |
|
.1.3.6.1.2.1.184.1.2.3.1.1.2 |
||
.1.3.6.1.2.1.184.1.2.3.1.1.3 |
||
.1.3.6.1.2.1.184.1.2.3.1.1.4 |
||
.1.3.6.1.2.1.184.1.2.3.1.1.5 |
||
.1.3.6.1.2.1.184.1.2.3.1.1.6 |
||
.1.3.6.1.2.1.184.1.2.3.2 |
||
.1.3.6.1.2.1.184.1.2.3.2.1 |
||
.1.3.6.1.2.1.184.1.2.3.2.2 |
||
|
Enumeration
|
.1.3.6.1.2.1.184.1.2.3.3 |
|
.1.3.6.1.2.1.184.1.2.4 |
||
.1.3.6.1.2.1.184.1.2.4.1 |
||
.1.3.6.1.2.1.184.1.2.4.2 |
||
.1.3.6.1.2.1.184.1.2.4.3 |
||
.1.3.6.1.2.1.184.1.2.4.4 |
||
.1.3.6.1.2.1.184.1.2.4.5 |
||
.1.3.6.1.2.1.184.1.2.4.6 |
||
.1.3.6.1.2.1.184.1.2.4.7 |
||
.1.3.6.1.2.1.184.1.3 |
||
.1.3.6.1.2.1.184.1.4 |
||
.1.3.6.1.2.1.184.1.4.1 |
||
.1.3.6.1.2.1.184.1.4.2 |
||
.1.3.6.1.2.1.184.1.4.2.1 |
||
.1.3.6.1.2.1.184.1.4.2.1.1 |
||
.1.3.6.1.2.1.184.1.4.2.1.2 |
||
.1.3.6.1.2.1.184.1.4.2.1.3 |
||
.1.3.6.1.2.1.184.1.4.2.1.4 |
||
.1.3.6.1.2.1.184.1.4.2.1.5 |
||
.1.3.6.1.2.1.184.1.4.2.1.6 |
||
.1.3.6.1.2.1.184.1.4.2.1.7 |
||
.1.3.6.1.2.1.184.1.4.2.2 |
||
.1.3.6.1.2.1.184.1.4.2.2.1 |
||
.1.3.6.1.2.1.184.1.4.2.2.1.1 |
||
.1.3.6.1.2.1.184.1.4.2.2.1.2 |
||
|
OctetString
|
.1.3.6.1.2.1.184.1.4.2.2.1.3 |
|
|
OctetString
|
.1.3.6.1.2.1.184.1.4.2.2.1.4 |
|
|
OctetString
|
.1.3.6.1.2.1.184.1.4.2.2.1.5 |
|
.1.3.6.1.2.1.184.1.4.2.2.1.6 |
||
.1.3.6.1.2.1.184.1.4.2.2.1.7 |
||
.1.3.6.1.2.1.184.1.4.3 |
||
.1.3.6.1.2.1.184.1.4.3.1 |
||
.1.3.6.1.2.1.184.1.4.3.1.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.184.1.4.3.1.1.1 |
|
.1.3.6.1.2.1.184.1.4.3.1.1.2 |
||
.1.3.6.1.2.1.184.1.4.3.1.1.3 |
||
|
Unsigned32
|
.1.3.6.1.2.1.184.1.4.3.1.1.4 |
|
|
Enumeration
|
.1.3.6.1.2.1.184.1.4.3.1.1.5 |
|
.1.3.6.1.2.1.184.2 |
||
.1.3.6.1.2.1.184.2.1 |
||
.1.3.6.1.2.1.184.2.2 |
Dependencies (10) 7 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- IP-MIBrfc
- MOBILEIPV6-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- NEMO-MIBrfcselected
Type Definitions (1)
| Enumeration |
mobileRouterOperationNotPermitted(140)invalidPrefix(141)notAuthorizedForPrefix(142)forwardingSetupFailed(143) |
Conformance Groups (9)
Compliance Statements (9)
OID
.1.3.6.1.2.1.184.2.2.1The compliance statement for SNMP entities
that implement the NEMO-MIB.
that implement the NEMO-MIB.
Required groups
| mandatory | nemoSystemGroup |
OID
.1.3.6.1.2.1.184.2.2.2The compliance statement for SNMP entities that
implement the NEMO-MIB and support monitoring of
the Binding Cache.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
implement the NEMO-MIB and support monitoring of
the Binding Cache.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
Required groups
| mandatory | nemoSystemGroup | |
| mandatory | nemoBindingCacheGroup |
OID
.1.3.6.1.2.1.184.2.2.3The compliance statement for SNMP entities
that implement the NEMO-MIB without support
for read-write (i.e., in read-only mode).
that implement the NEMO-MIB without support
for read-write (i.e., in read-only mode).
Required groups
| mandatory | nemoSystemGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| nemoStatus | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.184.2.2.4The compliance statement for SNMP entities that
implement the NEMO-MIB without support for read-write
(i.e., in read-only mode) and with support for
monitoring of the Binding Cache.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
implement the NEMO-MIB without support for read-write
(i.e., in read-only mode) and with support for
monitoring of the Binding Cache.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
Required groups
| mandatory | nemoSystemGroup | |
| mandatory | nemoBindingCacheGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| nemoStatus | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.184.2.2.5The compliance statement for SNMP entities that
implement the NEMO-MIB for monitoring configuration-
related information, registration details, and
statistics on a mobile router.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6MnHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnBLNodeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnBLNodeAddress
-- object.
implement the NEMO-MIB for monitoring configuration-
related information, registration details, and
statistics on a mobile router.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6MnHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnBLNodeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnBLNodeAddress
-- object.
Required groups
| mandatory | nemoStatsGroup | |
| mandatory | nemoMrConfGroup | |
| mandatory | nemoMrRegistrationGroup |
OID
.1.3.6.1.2.1.184.2.2.6The compliance statement for SNMP entities that
implement the NEMO-MIB without support for read-
write (i.e., in read-only mode) and with support for
monitoring of configuration-related information,
registration details, and statistics on a mobile
router.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6MnHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnBLNodeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnBLNodeAddress
-- object.
implement the NEMO-MIB without support for read-
write (i.e., in read-only mode) and with support for
monitoring of configuration-related information,
registration details, and statistics on a mobile
router.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6MnHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnBLNodeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6MnBLNodeAddress
-- object.
Required groups
| mandatory | nemoStatsGroup | |
| mandatory | nemoMrConfGroup | |
| mandatory | nemoMrRegistrationGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| nemoMrPrefixRegMode | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.184.2.2.7The compliance statement for SNMP entities that
implement the NEMO-MIB for configuration monitoring
at the home agent.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
implement the NEMO-MIB for configuration monitoring
at the home agent.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
Required groups
| mandatory | nemoHaSystemGroup |
OID
.1.3.6.1.2.1.184.2.2.8The compliance statement for SNMP entities that
implement the NEMO-MIB with support for monitoring
of the home agent functionality, specifically the
home-agent-registration-related statistics.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
implement the NEMO-MIB with support for monitoring
of the home agent functionality, specifically the
home-agent-registration-related statistics.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT-clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the mip6BindingHomeAddress
-- object.
--
Required groups
| mandatory | nemoHaSystemGroup | |
| mandatory | nemoHaStatsGroup | |
| mandatory | nemoHaGlobalStatsGroup |
OID
.1.3.6.1.2.1.184.2.2.9The compliance statement for SNMP entities that
implement the NEMO-MIB and support Notification
from the home agent.
implement the NEMO-MIB and support Notification
from the home agent.
Required groups
| mandatory | nemoNotificationGroup |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.2.1.184.0.1 |
This notification is sent by the mobile router
every time the tunnel is established between the home agent and the mobile router. |
|
.1.3.6.1.2.1.184.0.2 |
This notification is sent by the mobile router
every time the tunnel is deleted between the home agent and the mobile router. |