NAT-MIB
This MIB module defines the generic managed objects
for NAT.
Copyright (c) 2015 IETF Trust and the persons
identified as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this MIB module is part of RFC 7658;
see the RFC itself for full legal notices.
- Source file
NAT-MIB- Last revised
- Identity
natMIB- Base OID
1.3.6.1.2.1.123
Imported Objects
| IF-MIB | ifCounterDiscontinuityGroup (no object page) ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'NAT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'NAT-MIB::natMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NAT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NAT-MIB::natMIB'
Objects (113)
Showing 113 of 113 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.123 |
||
.1.3.6.1.2.1.123.0 |
||
.1.3.6.1.2.1.123.1 |
||
.1.3.6.1.2.1.123.1.1 |
||
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.123.1.1.1 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.123.1.1.2 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.123.1.1.3 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.123.1.1.4 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.123.1.1.5 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.123.1.1.6 |
|
|
.1.3.6.1.2.1.123.1.10 |
|
|
|
.1.3.6.1.2.1.123.1.10.1 |
|
|
|
.1.3.6.1.2.1.123.1.10.1.1 |
|
|
|
.1.3.6.1.2.1.123.1.10.1.2 |
|
|
|
.1.3.6.1.2.1.123.1.10.1.3 |
|
|
|
.1.3.6.1.2.1.123.1.10.1.4 |
|
.1.3.6.1.2.1.123.1.2 |
||
|
|
secondsInteger32
|
.1.3.6.1.2.1.123.1.2.1 |
|
|
.1.3.6.1.2.1.123.1.3 |
|
|
|
.1.3.6.1.2.1.123.1.3.1 |
|
|
|
Enumeration
|
.1.3.6.1.2.1.123.1.3.1.1 |
|
|
Bits
|
.1.3.6.1.2.1.123.1.3.1.2 |
|
|
.1.3.6.1.2.1.123.1.3.1.3 |
|
|
|
.1.3.6.1.2.1.123.1.3.1.4 |
|
|
|
.1.3.6.1.2.1.123.1.3.1.5 |
|
|
|
.1.3.6.1.2.1.123.1.3.1.6 |
|
|
|
.1.3.6.1.2.1.123.1.3.1.7 |
|
|
|
.1.3.6.1.2.1.123.1.4 |
|
|
|
.1.3.6.1.2.1.123.1.4.1 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.1 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.10 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.11 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.12 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.13 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.14 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.15 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.16 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.17 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.18 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.19 |
|
|
|
OctetString
|
.1.3.6.1.2.1.123.1.4.1.2 |
|
|
.1.3.6.1.2.1.123.1.4.1.20 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.21 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.3 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.4 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.5 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.6 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.7 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.8 |
|
|
|
.1.3.6.1.2.1.123.1.4.1.9 |
|
|
|
.1.3.6.1.2.1.123.1.5 |
|
|
|
.1.3.6.1.2.1.123.1.6 |
|
|
|
.1.3.6.1.2.1.123.1.6.1 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.1 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.10 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.11 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.12 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.13 |
|
|
|
OctetString
|
.1.3.6.1.2.1.123.1.6.1.2 |
|
|
.1.3.6.1.2.1.123.1.6.1.3 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.4 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.5 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.6 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.7 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.8 |
|
|
|
.1.3.6.1.2.1.123.1.6.1.9 |
|
|
|
.1.3.6.1.2.1.123.1.7 |
|
|
|
.1.3.6.1.2.1.123.1.8 |
|
|
|
.1.3.6.1.2.1.123.1.8.1 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.1 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.10 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.11 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.12 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.13 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.14 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.15 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.16 |
|
|
|
OctetString
|
.1.3.6.1.2.1.123.1.8.1.2 |
|
|
.1.3.6.1.2.1.123.1.8.1.3 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.4 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.5 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.6 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.7 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.8 |
|
|
|
.1.3.6.1.2.1.123.1.8.1.9 |
|
|
|
.1.3.6.1.2.1.123.1.9 |
|
|
|
.1.3.6.1.2.1.123.1.9.1 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.1 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.10 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.11 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.12 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.13 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.14 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.15 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.16 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.17 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.18 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.19 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.2 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.20 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.21 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.22 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.23 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.3 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.4 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.5 |
|
|
|
Enumeration
|
.1.3.6.1.2.1.123.1.9.1.6 |
|
|
.1.3.6.1.2.1.123.1.9.1.7 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.8 |
|
|
|
.1.3.6.1.2.1.123.1.9.1.9 |
|
.1.3.6.1.2.1.123.2 |
||
.1.3.6.1.2.1.123.2.1 |
||
.1.3.6.1.2.1.123.2.2 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- NAT-MIBrfcselected
Type Definitions (9)
| Unsigned32 |
range: 1..4294967295 |
|
| Enumeration |
static(1)dynamic(2) |
|
| Unsigned32 |
range: 1..4294967295 |
|
| Unsigned32 |
range: 0..4294967295 |
|
| Enumeration |
addressBind(1)addressPortBind(2) |
|
| Bits |
other(0)icmp(1)udp(2)tcp(3) |
|
| Enumeration |
none(1)other(2)icmp(3)udp(4)tcp(5) |
|
| Unsigned32 |
range: 1..4294967295 |
|
| Bits |
inboundSrcEndPoint(0)outboundDstEndPoint(1)inboundDstEndPoint(2)outboundSrcEndPoint(3) |
Conformance Groups (6)
Compliance Statements (2)
OID
.1.3.6.1.2.1.123.2.2.1When this MIB is implemented with support for
read-create, then such an implementation can claim
full compliance. Such devices can then be both
monitored and configured with this MIB.
The following index objects cannot be added as OBJECT
clauses but nevertheless have the compliance
requirements:
Deprecated in favor of NATV2-MIB.
read-create, then such an implementation can claim
full compliance. Such devices can then be both
monitored and configured with this MIB.
The following index objects cannot be added as OBJECT
clauses but nevertheless have the compliance
requirements:
Deprecated in favor of NATV2-MIB.
Required groups
| mandatory | IF-MIB::ifCounterDiscontinuityGroup | |
| mandatory | natConfigGroup | |
| mandatory | natTranslationGroup | |
| mandatory | natStatsInterfaceGroup | |
| optional | natStatsProtocolGroup | This group is optional. |
| optional | natStatsAddrMapGroup | This group is optional. |
| optional | natMIBNotificationGroup | This group is optional. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| natAddrMapLocalAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrMapLocalAddrFrom | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natAddrMapLocalAddrTo | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natAddrMapGlobalAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrMapGlobalAddrFrom | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natAddrMapGlobalAddrTo | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natAddrBindGlobalAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrBindGlobalAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natAddrPortBindGlobalAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrPortBindGlobalAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natSessionPrivateAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natSessionPrivateSrcAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natSessionPrivateDstAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natSessionPublicAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natSessionPublicSrcAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natSessionPublicDstAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
OID
.1.3.6.1.2.1.123.2.2.2When this MIB is implemented without support for
read-create (i.e., in read-only mode), then such an
implementation can claim read-only compliance.
Such a device can then be monitored but cannot be
configured with this MIB.
The following index objects cannot be added as OBJECT
clauses but nevertheless have the compliance
requirements:
Deprecated in favor of NATV2-MIB.
read-create (i.e., in read-only mode), then such an
implementation can claim read-only compliance.
Such a device can then be monitored but cannot be
configured with this MIB.
The following index objects cannot be added as OBJECT
clauses but nevertheless have the compliance
requirements:
Deprecated in favor of NATV2-MIB.
Required groups
| mandatory | IF-MIB::ifCounterDiscontinuityGroup | |
| mandatory | natConfigGroup | |
| mandatory | natTranslationGroup | |
| mandatory | natStatsInterfaceGroup | |
| optional | natStatsProtocolGroup | This group is optional. |
| optional | natStatsAddrMapGroup | This group is optional. |
| optional | natMIBNotificationGroup | This group is optional. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| natInterfaceRowStatus | readonly |
active(1)
|
Write access is not required, and active is the only status that needs to be supported. |
| natAddrMapLocalAddrType | readonly |
ipv4(1), ipv6(2)
|
Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
| natAddrMapLocalAddrFrom | readonly | Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrMapLocalAddrTo | readonly | Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrMapGlobalAddrType | readonly |
ipv4(1), ipv6(2)
|
Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
| natAddrMapGlobalAddrFrom | readonly | Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrMapGlobalAddrTo | readonly | Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrMapRowStatus | readonly |
active(1)
|
Write access is not required, and active is the only status that needs to be supported. |
| natAddrBindGlobalAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrBindGlobalAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natAddrPortBindGlobalAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natAddrPortBindGlobalAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natSessionPrivateAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natSessionPrivateSrcAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natSessionPrivateDstAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natSessionPublicAddrType |
ipv4(1), ipv6(2)
|
An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
|
| natSessionPublicSrcAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
||
| natSessionPublicDstAddr | An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
|
natPacketDiscard
deprecated
|
.1.3.6.1.2.1.123.0.1 |
This notification is generated when IP packets are
discarded by the NAT function; e.g., due to lack of mapping space when NAT is out of addresses or ports. Note that the generation of natPacketDiscard notifications is throttled by the agent, as specified by the 'natNotifThrottlingInterval' object. Deprecated in favor of NATV2-MIB. |