MY-OSPF-MIB Table View

Information describing the configured  parame-
ters  and cumulative statistics of the router's
attached areas.This table is superset of ospfAreaTable

myOspfAreaEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1

The entry of myOspfAreaTable.

Indexes

myOspfAreaId

Column	Syntax	OID
myOspfAreaId A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.1
myOspfAuthType The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.	Enumerationr/w Enumerated Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.2
myOspfImportAsExtern The area's support for importing AS external link- state advertisements.	Enumerationr/w Enumerated Values: 1 importExternal 2 importNoExternal 3 importNssa	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.3
myOspfSpfRuns The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.4
myOspfAreaBdrRtrCount The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.5
myOspfAsBdrRtrCount The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.6
myOspfAreaLsaCount The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.7
myOspfAreaLsaCksumSum The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to deter…	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.8
myOspfAreaSummary The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary L…	Enumerationr/w Enumerated Values: 1 noAreaSummary 2 sendAreaSummary	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.9
myOspfAreaStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.10
myOspfAreaInterfaceNum the interface number of this area	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.11
myOspfAreaNssaIsRedistribution if it's disabled , when the router is an NSSA ABR and you want the redistribute command to import routes into normal areas, but not into the NSSA, this field is vaild for nssa area	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.12
myOspfAreaNssaIsDefInfoOriginate if it's enabled it meaning that on an ABR to allow importing type 7 LSAs into the NSSA, this field is valid for nssa area	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4881.1.1.10.2.30.1.2.1.13

Define an interface on which OSPF runs and the area ID for that
interface. You can use the wildcard-mask to use a single
command to define one or more multiple interfaces to be
associated with a specific OSPF area.

myOspfAddressScopeEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.3.1

the entry define an scope of address for ospf routing.

Indexes

myOspfNetWorkAreaID myOspfNetWorkAddress myOspfNetWorkMask

Column	Syntax	OID
myOspfNetWorkAreaID area ID	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.3.1.1
myOspfNetWorkAddress Routing for Networks Ipaddress	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.3.1.2
myOspfNetWorkMask Routing for Networks mask	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.3.1.3
myOspfNetWorkStatus when this value is destroy,the entry will be deleted	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4881.1.1.10.2.30.1.3.1.4

The OSPF Interface Table describes the  interfaces 
from the viewpoint of OSPF.

myOspfIfEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1

The OSPF Interface Entry describes one inter-
face configuration of OSPF.

Indexes

myOspfIfIpAddress myOspfAddressLessIf

Column	Syntax	OID
myOspfIfIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.1
myOspfAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces havin…	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.2
myOspfIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.3
myOspfIfType The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25…	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint 6 loopback	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.4
myOspfIfAdminStat The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is extern…	OSPF-MIBStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.5
myOspfIfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designate…	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.6
myOspfIfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.7
myOspfIfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request …	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.8
myOspfIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.	OSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.9
myOspfIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for a…	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.10
myOspfIfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.	OSPF-MIBPositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.11
myOspfIfState The OSPF Interface State.	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.12
myOspfIfDesignatedRouter The IP Address of the interface which connected the local router in the Designated Router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.13
myOspfIfBackupDesignatedRouter The IP Address of the interface which connected the local router in the Backup Designated Router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.14
myOspfIfEvents The number of times this OSPF interface has changed its state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.15
myOspfIfAuthKey The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthentica…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.16
myOspfIfStatus This value will be active(1) always.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.17
myOspfIfMulticastForwarding The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NB…	Enumeration Enumerated Values: 1 blocked 2 multicast 3 unicast	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.18
myOspfIfDemand Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.19
myOspfIfAuthType The authentication type specified for an interface. Setting this value to 'default' means using default authentication type referenced to Area Authentication, this value only for set,not be read. Additional authent…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.20
myOspfIfDatabaseFilterAllOut Block flooding of OSPF LSA packets to the interface. By default, OSPF floods new LSAs over all interfaces in the same area, except the interface on which the LSA arrives.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.21
myOspfIfDesignateRouterId DR RouterID of this interface, when DR does not selected,DR Id is 0.0.0.0	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.22
myOspfIfBackupDesignateRouterId Backup DR RouterId of this interface , when Backup DR does not selected,BDR Id is 0.0.0.0	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.23
myOspfIfWaitInternal The wait time of hello generate	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.24
myOspfIfPassiveStatus Setting this object value to 'enabled' ,the interface will become a passive interface.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.25
myOspfIfCurrentUsedMd5AuthKeyId key-id which current used for md5 authentication,this value is valid from 1 to 255, the value 0 is default value..	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.26

Configuration table of the key-id for md5 authentication for OSPF protocol.

myOspfIfMd5AuthKeyEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.5.1

Configuration entry of the key-id for md5 authentication for OSPF protocol

Indexes

myOspfIfMd5AuthKeyIf myOspfIfMd5AuthKeyId

Column	Syntax	OID
myOspfIfMd5AuthKeyIf Corresponding value of ifIndex for interfaces.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.5.1.1
myOspfIfMd5AuthKeyId the key-id for md5 authentication.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.4881.1.1.10.2.30.1.5.1.2
myOspfIfMd5AuthKey The Authentication Key for MD5. When read, myOspfIfMd5AuthKey always returns an Oc- tet String of length zero.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.4881.1.1.10.2.30.1.5.1.3
myOspfIfMd5AuthKeySt Setting this value to 'invalid' will delete this entry. Setting this value to 'valid' will have no effect.	MY-TCConfigStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.4881.1.1.10.2.30.1.5.1.4

Information about this router's virtual inter-
faces.Include ospfVirtIfTable in rfc1850

myOspfVirtEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1

Information about a single Virtual Interface

Indexes

myOspfVirtIfAreaId myOspfVirtIfNeighbor

Column	Syntax	OID
myOspfVirtIfAreaId The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0	OSPF-MIBAreaID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.1
myOspfVirtIfNeighbor The Router ID of the Virtual Neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.2
myOspfVirtIfTransitDelay The estimated number of seconds it takes to transmit a link- state update packet over this interface.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.3
myOspfVirtIfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state reque…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.4
myOspfVirtIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.	OSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.5
myOspfVirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for t…	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.6
myOspfVirtIfState OSPF virtual interface states.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.7
myOspfVirtIfEvents The number of state changes or error events on this Virtual Link	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.8
myOspfVirtIfAuthKey If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- ticatio…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.9
myOspfVirtIfStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.10
myOspfVirtIfAuthType The authentication type specified for a virtual interface. Setting this value 'default' means using default authentication type referenced to Area Authentication, this value only for set,not be read. Additional authe…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.11
myOspfVirtCost Explicitly specify the cost of sending a packet on the interface.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.12
myOspfVirtNativeIfIndex the Interface's Index that The Virtual Link via this interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.13
myOspfVirtLinkState The Virtual Link State is up or down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.14
myOspfVirtHelloDueIn the time when hello due in.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.15
myOspfVirtCurrentUsedMd5AuthKeyId the key-id which current used for md5 authentication,this value is valid from 1 to 255, the value 0 is default value.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4881.1.1.10.2.30.1.6.1.16

Configuration table of the key-id for md5 authentication in VirtIf 
for OSPF protocol.

myOspfVirtIfMd5AuthKeyEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.7.1

Configuration entry of the key-id for md5 authentication in VirtIf
for OSPF protocol

Indexes

myOspfVirtIfMd5AuthKeyAreaId myOspfVirtIfMd5AuthKeyNeighbor myOspfVirtIfMd5AuthKeyId

Column	Syntax	OID
myOspfVirtIfMd5AuthKeyAreaId The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0	OSPF-MIBAreaID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.7.1.1
myOspfVirtIfMd5AuthKeyNeighbor The Router ID of the Virtual Neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.7.1.2
myOspfVirtIfMd5AuthKeyId the key-id for md5 authentication.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.4881.1.1.10.2.30.1.7.1.3
myOspfVirtIfMd5AuthKey The Authentication Key for MD5. When read, myOspfVirtIfMd5AuthKey always returns an Oc- tet String of length zero.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.4881.1.1.10.2.30.1.7.1.4
myOspfVirtIfMd5AuthKeySt Setting this value to 'invalid' will delete this entry. Setting this value to 'valid' will have no effect.	MY-TCConfigStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.4881.1.1.10.2.30.1.7.1.5

The OSPF Process's Link State Database.

myOspfLsdbEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1

A single Link State Advertisement.

Indexes

myOspfLsdbAreaId myOspfLsdbType myOspfLsdbLsid myOspfLsdbRouterId

Column	Syntax	OID
myOspfLsdbAreaId The 32 bit identifier of the Area from which the LSA was received.	OSPF-MIBAreaID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.1
myOspfLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format.	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 5 asExternalLink 6 multicastLink 7 nssaExternalLink	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.2
myOspfLsdbLsid The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.3
myOspfLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.4
myOspfLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.5
myOspfLsdbAge This field is the age of the link state adver- tisement in seconds.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.6
myOspfLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.7
myOspfLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-512	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.8
myOspfLsdbLinkNum the link count of this Router Link Lsa , this field is only valid for Router Link Lsa??type 1 LSA)	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.9
myOspfLsdbPacketLength the lsa packet length .	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.10
myOspfSummaryLsaNetworkMask this field is only useful when ospfLsdbType is type-3 or type-4 or type-7,it's the Lsa's network mask .	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.11
myOspfSummaryLsaTos0Metric this field is only useful when ospfLsdbType is type-3 or type-4 or type-7,it's the Lsa's tos0 metric .	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.12
myOspfNssaLsaDetailMetricType this field is valid when Lsa is a type-7 LSA. The type of Nssa ernal metric. If bit E is set, the metric specified is a Type 2 external metric. This means the metric is considered larger than any link state path. If …	Enumeration Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.13
myOspfNssaLsaDetailForwardAddr this field is valid when Lsa is a type-7 LSA. Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the L…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.14
myOspfNssaLsaDetailRouteTag this field is valid when Lsa is a type-7 LSA. A 32-bit field attached to each external route. This is not used by the OSPF protocol itself. It may be used to communicate information between AS boundary routers; the pr…	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.15
myOspfLsdbOption the option field indicate which optional capabilities area associated with the LSA.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.1.1.16

The OSPF Process's Links State Database.

myOspfExtLsdbEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1

A single Link State Advertisement.

Indexes

myOspfExtLsdbType myOspfExtLsdbLsid myOspfExtLsdbRouterId

Column	Syntax	OID
myOspfExtLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format.	Enumeration Enumerated Values: 5 asExternalLink	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.1
myOspfExtLsdbLsid The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.2
myOspfExtLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.3
myOspfExtLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.4
myOspfExtLsdbAge This field is the age of the link state adver- tisement in seconds.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.5
myOspfExtLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.6
myOspfExtLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 36-36	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.7
myOspfExtLsdbNetworkMask The IP address mask for the advertised destination. For example, when advertising a class A network the mask 0xff000000 would be used.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.8
myOspfExtLsdbMetric The cost of this route. Interpretation depends on the external type indication.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.9
myOspfExtLsdbMetricType The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. This means the metric is considered larger than any link state path. If bit E is zero, the specified metric is a Type 1 …	Enumeration Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.10
myOspfExtLsdbForwardAddr Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS bound…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.11
myOspfExtLsdbRouteTag A 32-bit field attached to each external route. This is not used by the OSPF protocol itself. It may be used to communicate information between AS boundary routers; the precise nature of such information is outside th…	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.12
myOspfExtLsdbOption the option field indicate which optional capabilities area associated with the LSA.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.13
myOspfExtLsdbPacketLength the lsa packet length .	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.2.1.14

the router Lsa's detail Infromtion.

myOspfRouterLsaDetailEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.8.3.1

the entry of this table.

Indexes

myOspfLsdbAreaId myOspfLsdbType myOspfLsdbLsid myOspfLsdbRouterId myOspfRouterLsaDetailLinkID

Column	Syntax	OID
myOspfRouterLsaDetailLinkID router lsa's link ID Identifies the object that this router link connects to. Value depends on the link's Type. When connecting to an object that also originates an LSA (i.e., another router or a transit network)…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.3.1.1
myOspfRouterLsaDetailLinkType router lsa's link type A quick description of the router link. One of the following. Note that host routes are classified as links to stub networks with network mask of 0xffffffff.	Enumeration Enumerated Values: 1 pointtopointConnectionToAnotherRouter 2 connectionToaTransitNetwork 3 connectionToaStubNetwork 4 virtualLink	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.3.1.2
myOspfRouterLsaDetailLinkData Value again depends on the link's Type field. For connections to stub networks, Link Data specifies the network's IP address mask. For unnumbered point-to-point connections, it specifies the interface's MIB-II ifIndex …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.3.1.3
myOspfRouterLsaDetailTos0Metric TOS0-specific metric information.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.3.1.4

the NetWork Lsa's detail Infromtion.

myOspfNetWorkLsaDetailEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.8.4.1

the entry of this table.

Indexes

myOspfLsdbAreaId myOspfLsdbType myOspfLsdbLsid myOspfLsdbRouterId myOspfNetWorkLsaDetailAttachedRouter

Column	Syntax	OID
myOspfNetWorkLsaDetailAttachedRouter The Router IDs of each of the routers attached to the network. Actually, only those routers that are fully adjacent to the Designated Router are listed. The Designated Router includes itself in this list. The number o…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.4.1.1
myOspfNetWorkLsaDetailNetworkMask The IP address mask for the network. For example, a class A network would have the mask 0xff000000.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.4.1.2

The OSPF Area LSA database summary Infromtion.

myOspfAreaLsaDBSumEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.8.5.1

the entry of this table.

Indexes

myOspfAreaLsaDBSumAreaId myOspfAreaLsaDBSumLsaType

Column	Syntax	OID
myOspfAreaLsaDBSumAreaId The area Id.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.5.1.1
myOspfAreaLsaDBSumLsaType the entry's entry type.	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 7 nssaExternalLink 8 subtotal	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.5.1.2
myOspfAreaLsaDBSumCounts number os this type Lsa in this area , if this type Lsa does not exist,this field is 0.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.5.1.3
myOspfAreaLsaDBSumDeletes number os this type Lsa which has been delete in this area , if this type Lsa is not been deleted,this field is 0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.5.1.4
myOspfAreaLsaDBSumMaxage number of this type Lsa which has up to Maxage, if this type Lsa which has up to Maxage does not exist, this field is 0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.5.1.5

LSA database total summary infromtion in the all areas .

myOspfLsaDBSumEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.8.6.1

the entry of this table.

Indexes

myOspfLsaDBSumLsaType

Column	Syntax	OID
myOspfLsaDBSumLsaType the table's entry type.	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryTotalLink 4 asSummaryTotalLink 5 asExternalLink 7 nssaExternalLink 8 total	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.6.1.1
myOspfLsaDBSumCounts total number of this type Lsa in all area .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.6.1.2
myOspfLsaDBSumDeletes total number of this type Lsa deleted in all area .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.6.1.3
myOspfLsaDBSumMaxage total number of this type Lsa which has been up to max age in all area	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.8.6.1.4

the neighbor detail infomation .

myOspfNeighborEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1

the entry of this table.

Indexes

myOspfNbrIpAddr myOspfNbrAddressLessIndex

Column	Syntax	OID
myOspfNbrIpAddr The IP address this neighbor(neighbor's interface IP address) is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfa…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.1
myOspfNbrAddressLessIndex On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.2
myOspfNbrRtrId A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.3
myOspfNbrOptions A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all …	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.4
myOspfNbrPriority The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.	OSPF-MIBDesignatedRouterPriority Type Constraints: range: 0..255	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.5
myOspfNbrState The State of the relationship with this Neigh- bor.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeMy 6 exchange 7 loading 8 full	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.6
myOspfNbrEvents The number of times this neighbor relationship has changed state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.7
myOspfNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.8
myOspfNbmaNbrStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.9
myOspfNbmaNbrPermanence This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known.	Enumeration Enumerated Values: 1 dynamic 2 permanent	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.10
myOspfNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.11
myOspfNbrDeadTimeDueIn if in this interval ,hello packet is not been received , the neighbor is recognized dead.if received,it will recovery the dead time which has been setted.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.12
myOspfNbrNeighborUpTime the time that the neighbor has been up.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.13
myOspfNbrDR the Designated Router of this neighbor.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.14
myOspfNbrBDR the Backup Designated Router of this neighbor.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.15
myOspfNbrArea the area where the neighbor is in.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.16
myOspfNbrRetransmissionNum the Retransmission times.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.17
myOspfNbrIfState The neighbor's interface State which connected to local router.	Enumeration Enumerated Values: 0 other 1 designatedRouter 2 backupDesignatedRouter 3 otherDesignatedRouter	.1.3.6.1.4.1.4881.1.1.10.2.30.1.9.1.18

This entity's OSPF border routing table.

myOspfRouteEntry row .1.3.6.1.4.1.4881.1.1.10.2.30.1.10.1

A route to a destination.

Indexes

myOspfRouteDest myOspfRouteArea myOspfRouteNextHop

Column	Syntax	OID
myOspfRouteDest Router ID of the destination.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.10.1.1
myOspfRouteArea The area ID of the area from which this route is learned.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.10.1.2
myOspfRouteNextHop Next hop toward the destination.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.30.1.10.1.3
myOspfRouteCost Cost of using this route.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.10.1.4
myOspfRouteDRType The router type of the destination; it is either an ABR or ASBR or both.	Enumeration Enumerated Values: 1 abr 2 asbr 3 both	.1.3.6.1.4.1.4881.1.1.10.2.30.1.10.1.5
myOspfRouteType this field indicate this route is an intral area route or inter area route.	Enumeration Enumerated Values: 1 intral-area-route 2 inter-area-route	.1.3.6.1.4.1.4881.1.1.10.2.30.1.10.1.6
myOspfRouteSpfNo The internal number of the shortest path first (SPF) calculation that installs this route.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4881.1.1.10.2.30.1.10.1.7