MX-NAT2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
8

natPortForwardingTable

table
.1.3.6.1.4.1.4935.15.500.1.10.10 · 1 row entry · 8 columns
Open in standard view
Uses the media5 variant from /opt/observium/mibs/media5.
Command help
Walk natPortForwardingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-NAT2-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-NAT2-MIB::natPortForwardingTable' 
A table that contains the port forwarding rules. This table is enabled if
the variable ipRoutingEnable is enabled and if the variable ipRoutingMode is
set to NAT.
          
This table can contain up to 20 port forwarding rules.
          
These rules will be applied only on the incoming WAN traffic destinated to the LAN.
          
This table's semantics are different depending on the hardware platform.
Please refer to the documentation shipped with your device for more
details.
natPortForwardingEntry row .1.3.6.1.4.1.4935.15.500.1.10.10.5
A row in the natPortForwardingTable used to specify a port forwarding rule.
An entry is enabled if the variable ipRoutingEnable is enabled and if the variable
ipRoutingMode is in NAT mode. The variable natPortForwarding…
Indexes
Column Syntax OID
natPortForwardingIndex
Port forwarding index for this row.
Unsigned32
Constraints:
range: 1-20
 .1.3.6.1.4.1.4935.15.500.1.10.10.5.10
natPortForwardingWanStartPort
The port on the unit's WAN side may be configured in two ways:
by identifying only one port or a port range. If the redirection affects only
one port, the current variable represents this port and the variable
natPortF…
MX-TCMxIpPortr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.4935.15.500.1.10.10.5.20
natPortForwardingWanFinishPort
If the redirection affects a port range, the current variable represents the last port
of the range, while the variable natPortForwardingWanStartPort represents the
first port of the range.

In the case of…
MX-TCMxIpPortr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.4935.15.500.1.10.10.5.30
natPortForwardingProtocol
The protocol of the packets to forward. The specified protocol can be UDP, TCP or both.

udp : User Datagram Protocol

tcp : Transmission Control Protocol

all : UDP and TCP
Enumerationr/w
Enumerated Values:
0udp
1tcp
99all
 .1.3.6.1.4.1.4935.15.500.1.10.10.5.40
natPortForwardingLanAddr
The new destination address on the unit's LAN side is configured by this variable.
MX-TCMxIpAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4935.15.500.1.10.10.5.50
natPortForwardingLanPort
The destination port on the unit's LAN side may be configured in two ways.

First, the WAN destination port or port range remains the same on the
LAN side. For this configuration, the current variable must…
MX-TCMxAdvancedIpPortr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4935.15.500.1.10.10.5.60
natPortForwardingRuleLabel
Short description of the port forwarding rule.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4935.15.500.1.10.10.5.70
natPortForwardingRuleEnable
Indicates if the specific port forwarding rule of a row is used or not.
This rule is enabled if the variable ipRoutingEnable is enabled and if
the variable ipRoutingMode is set to NAT.

Since the modificat…
MX-TCMxEnableStater/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4935.15.500.1.10.10.5.80