MX-H323-ATTRIBUTES-MIB Table View

This table holds the configuration for the 'called party number' information
element. This information element is used by H.323 units. This configuration
applies to both terminal and gateway lines.

h323AttributesQ931CalledPartyNumberEntry row .1.3.6.1.4.1.4935.20.30.5.1.1.15.1

A row in the h323AttributesQ931CalledPartyNumberTable. It contains the
configuration for the 'called party number' information element.

Indexes

h323AttributesCalledPartyNumberIndex

Column	Syntax	OID
h323AttributesCalledPartyNumberIndex Index of the h323AttributesQ931CalledPartyNumberTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4935.20.30.5.1.1.15.1.1
h323AttributesCalledPartyNumberEnable This variable is related to the 'called party number' information element (Q.931 header of the SETUP message). When all the digit maps are disabled, the 'type of number' field is set to 'National number' …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4935.20.30.5.1.1.15.1.5
h323AttributesCalledPartyNumberDigitMap This variable is related to the 'called party number' information element (Q.931 header of the SETUP message). This digit map is associated with a 'type of number' value. At the beginning o…	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.4935.20.30.5.1.1.15.1.10
h323AttributesCalledPartyNumberTypeOfNumber This variable is related to the 'called party number' information element (Q.931 header of the SETUP message). This variable indicates the 'type of number' value associated with a digit map. …	Enumerationr/w Enumerated Values: 0 internationalNumber 1 nationalNumber 2 subscriberNumber 3 privateNumber 4 unknown	.1.3.6.1.4.1.4935.20.30.5.1.1.15.1.15

This table holds signaling attributes of a H.323 unit. This configuration
applies to both terminal and gateway lines.
          
Each row is used to configure the signaling attributes of one line.

h323IfSignalingAttributesEntry row .1.3.6.1.4.1.4935.20.30.5.1.5.1

Each row is used to configure the signaling attributes of one line.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
h323AttributesEarlyH245Enable With the early H.245 procedure, the line includes its H.245 address in the SETUP message (when making a call) or in the CONNECT message (when receiving a call). This H.245 address may be used by the remote endpoint to o…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4935.20.30.5.1.5.1.5
h323AttributesH245TunnelingEnable When tunneling is enabled, the line sends H.245 messages within Q.931 messages. When H.245 is enabled and the line is the calling endpoint: - The line offers the use of H.245 tunneling b…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4935.20.30.5.1.5.1.10
h323AttributesFastConnectEnable The Fast Connect procedure allows two H.323 endpoints to establish a call with as few as one round-trip message exchange, enabling immediate media stream delivery upon call connection. When making a call,…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4935.20.30.5.1.5.1.15
h323AttributesParallelH245Enable The parallel H.245 procedure allows a line to include all the following elements in the SETUP message: - fastStart channels - terminalCapabilitySet message - mast…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4935.20.30.5.1.5.1.20
h323AttributesVoiceCapabilitySendingMethod Indicates how the line constructs the fastStart element and the terminalCapabilitySet message. This variable applies only to the fastStart element of the SETUP message. This applies to all the terminalCapabilitySet mess…	Enumerationr/w Enumerated Values: 0 abbreviated 1 detailed	.1.3.6.1.4.1.4935.20.30.5.1.5.1.25

This table holds telephony attributes of a H.323 unit. This configuration
applies to both terminal and gateway lines.
          
Each row is used to configure the telephony attributes of one line.

h323IfTelephonyAttributesEntry row .1.3.6.1.4.1.4935.20.30.5.1.10.1

Each row is used to configure the telephony attributes of one line.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
h323AttributesDirectGatewayCallEnable The 'Direct Gateway Call' is a Mediatrix proprietary procedure. The line is configured with the IP address of a gateway. This procedure applies only to lines that are not configured to register: …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4935.20.30.5.1.10.1.5
h323AttributesDirectGatewayCallHost The IP address of the gateway used in the 'Direct Gateway Call' procedure. The 'Direct Gateway Call' is a Mediatrix proprietary procedure. It allows the use of a gateway without the presence of a gatekeep…	MX-TCMxIpAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4935.20.30.5.1.10.1.10